micro-measurements@vishay.com
Full Bridge Patterns
Vishay Micro-Measurements
Document No: 11560
Revision 17-Nov-03
www.vishaymg.com
26
Transducer-Class® Strain Gages
GAGE OVERALL GRID OVERALL
LENGTH LENGTH WIDTH WIDTH
MATRIX SIZE
GAGE OVERALL GRID OVERALL
LENGTH LENGTH WIDTH WIDTH
MATRIX SIZE
GAGE OVERALL GRID OVERALL
LENGTH LENGTH WIDTH WIDTH
MATRIX SIZE
GAGE PATTERN
Actual size shown.
Enlarged when necessary for definition.
GAGE RES. STANDARD
DESIGNATION IN CREEP
OHMS CODE
DIMENSIONS inch
millimeter
0.050 0.260 0.050 0.220
1.28 6.66 1.28 5.64
0.32 L x 0.25 W 8.2 L x 6.4 W
Low-cost full-bridge gage for bending- beam transducers.
†BAL is balanced to ± 0.4mV/V, but RG is 350 ohms ± 15%.
J2A-XX-S1425-35B BAL ±0.4† N/A
0.125 0.465 0.060 0.189
3.18 11.81 1.52 4.80
0.54 L x 0.26 W 13.7 L x 6.6 W
Compact full-bridge pattern for use on small, double-bending beams. Axial
grid centerline spacing 0.250 in (6.35 mm).
N2A-XX-S055R-350 350 ±0.2% R
0.125 0.545 0.060 0.189
3.18 13.84 1.52 4.80
0.62 L x 0.26 W 15.8 L x 6.6 W
Similar to S055R pattern except axial grid centerline spacing 0.330 in
(8.38mm).
N2A-XX-S014N-350 N
350 ±0.2%
micro-measurements@vishay.com
Full Bridge Patterns
Vishay Micro-Measurements
Document No: 11560
Revision 17-Nov-03
www.vishaymg.com
27
Transducer-Class® Strain Gages
GAGE OVERALL GRID OVERALL
LENGTH LENGTH WIDTH WIDTH
MATRIX SIZE
GAGE OVERALL GRID OVERALL
LENGTH LENGTH WIDTH WIDTH
MATRIX SIZE
GAGE OVERALL GRID OVERALL
LENGTH LENGTH WIDTH WIDTH
MATRIX SIZE
GAGE PATTERN
Actual size shown.
Enlarged when necessary for definition.
GAGE RES. STANDARD
DESIGNATION IN CREEP
OHMS CODE
DIMENSIONS inch
millimeter
0.100 0.345 0.120 0.295
2.54 8.76 3.05 7.49
0.41 L x 0.36 W 10.4 L x 9.1 W
Full-bridge pattern for single-surface gaging of transducers.
N2A-XX-S056R-350
N2A-XX-S120P-10C R*
P*
350 ±0.2%
1000 ±0.2%
0.070 0.258 0.070 0.195
1.78 6.55 1.78 4.95
0.31 L x 0.25 W 7.9 L x 6.4 W
Low-cost full-bridge gage for bending- beam transducers.
†BAL is balanced to ± 0.4mV/V, but RG is 1200 ohms ± 15%.
N2A-XX-S1449-1KB N/A
BAL ±0.4†
Low-cost, full-bridge pattern for bending-beam transducers.
†BAL is balanced to ± 0.4mV/V, but RG is 350 ohms ± 15%.
N2A-XX-S1612-35B
*Only creep code available for this gage type.
0.070 0.238 0.070 0.190
1.78 6.04 1.78 4.83
0.27 L x 0.23 W 7.0 L x 5.8 W N/A
BAL ±0.4†
