ABRIDGED DATA SHEET MAX2900 10kHz to 490kHz OFDM-Based Power Line Communication Modem LE AVAILAB General Description The MAX2990 power line communication (PLC) baseband modem delivers a cost-effective, reliable, halfduplex asynchronous data communication over AC power lines at speeds up to 100kbps. The MAX2990 is a highly integrated system-on-chip (SoC) that combines the physical (PHY) and media access control (MAC) layers using Maxim's 16-bit MAXQ microcontroller core. The MAX2990 utilizes OFDM modulation techniques to enable robust data communication using the same electrical network that supplies power to all other devices on the network. The MAX2990 includes the MAXQ microcontroller core. The MAXQ is a 16-bit RISC microcontroller with 32kB flash memory, 5.12kB of ROM, and 8kB SRAM, of which 4kB that can be simultaneously accessed by the MCU and the PHY. The MAX2990 is integrated with modules for serial communication (SPITM, I2C, UART) and a real-time clock (RTC) for time stamping, in addition to standard blocks such as timers, GPIO, and external interrupts. The MAX2990 transceiver is based on an orthogonal frequency division multiplexing (OFDM) technique that allows robust data transmission over poor channel conditions specifically for environments with impulsive noise. OFDM with binary phase shift key (BPSK) and forward error correcting (FEC) blocks are used because of their inherent adaptability in the presence of frequency selective channels without the use of equalizers, resilience to jammer signals, robust communications in the presence of group delay spread, and robustness to impulsive noise. The MAX2990 features Functional Diagrams jammer cancellation that removes constant sinusoidal interference signals for FCC and ARIB bands. Privacy is provided by DES encryption. The MAX2990 is available in a 64-pin LQFP package and is specified over the -40C to +85C extended temperature range. Features Combines the Physical Layer (PHY) and Media Access Controller (MAC) Integrated Microcontroller with 32kB PasswordProtected Flash Memory and 8kB SRAM Maximum Effective Data Rate in Normal Mode 32kbps at 10kHz to 95kHz and 100kbps at 10kHz to 490kHz Complies with CENELEC A (10kHz to 95kHz) CENELEC B (95kHz to 120kHz) CENELEC C (120kHz to 140kHz) FCC (10kHz to 490kHz) ARIB (10kHz to 450kHz) Includes Forward Error Correction (FEC) Mechanism and CRC16 Includes Fast DES Engine as the Encryption/Decryption Coprocessor and CRC32 Jammer Cancellation for FCC and ARIB User-Configured Start and End Operating Frequency Carrier Sense Multiple Access/Collision Avoidance (CSMA/CA) Channel Access Arbitration Automatic Repeat Request (ARQ) to Enhance Error Detection and Improve Data Reliability Supports SPI, I2C, and UART Interfaces Real-Time Clock (RTC) PWM Counters Built-In Test Mode Engine for Identifying Channel Conditions Applications Automatic Meter Reading Home Automation Sensor Control and Data Acquisition Heating Ventilation and Air Conditioning (HVAC) Remote Monitoring and Control Building Automation Voice-Over-Powerline Industrial Automation Security Systems/Keyless Entry Lighting Control Pin Configurations appear at end of data sheet. Functional Diagrams continued at end of data sheet. SPI isisa atrademark Inc. UCSP trademarkofofMotorola, Maxim Integrated Products, Inc. Ordering Information PART TEMP RANGE PIN-PACKAGE MAX2990ECB+ -40C to +85C 64 LQFP +Denotes a lead-free package. Pin Configuration appears at end of data sheet. Typical Application Circuit appears at end of data sheet. For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maximintegrated.com. 19-4116; Rev 0; 4/08 ABRIDGED DATA SHEET MAX2900 10kHz to 490kHz OFDM-Based Power Line Communication Modem Typical Application Circuit MAX2990 PHY/MAC TX RX I2C AFE UART DAC MAXQ AFE SPI AFE INTERFACE SCLK MOSI MISO SPI I/O GPIO LINE DRIVER AC POWER LINE SDA SCL LPF/AGC ADC OFDM PLC PHY 49 AGND 50 AVDD 51 P3.0 52 P3.1 53 DGND 54 VDDC 55 P3.2 56 VDDIO 57 P3.3 58 DGND 59 VDDC 60 P3.4 61 P3.5 62 P3.6 63 P3.7 + 64 P3.8 Pin Configuration P0.0 1 48 XTAL1A P0.1 2 47 XTAL2A P0.2 3 46 TCK P0.3 4 45 TMS DGND 5 44 TDI VDDC 6 43 P2.0 32KIN 7 32KOUT 8 VDDIO 9 42 P2.1 MAX2990 41 P2.2 40 P2.3 P0.4 10 39 VDDIO P0.5 11 38 P2.4 P0.6 12 37 P2.5 P0.7 13 36 P2.6 TDO 32 PROG 31 P1.7 29 DGND 30 P1.6 28 P1.5 27 P1.4 26 VDDIO 25 P1.3 24 P1.2 23 P1.1 22 P1.0 21 33 DGND VDDC 20 AGND 16 DGND 19 34 VDDC XTAL2S 18 35 P2.7 XTAL1S 17 RST 14 AVDD 15 LQFP 2 Maxim Integrated ABRIDGED DATA SHEET MAX2900 10kHz to 490kHz OFDM-Based Power Line Communication Modem Functional Diagrams Pin Configurations appear at end of data sheet. Functional Diagrams continued at end of data sheet. Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. UCSP a trademark Products, Inc. without notice at any time. The parametric values (min and max limits) shown in the Electrical Maxim is reserves the rightof toMaxim change Integrated the circuitry and specifications Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance. Maxim Integrated 160 Rio Robles, San Jose, CA 95134 USA 1-408-601-1000 (c) Maxim Integrated 3 The Maxim logo and Maxim Integrated are trademarks of Maxim Integrated Products, Inc.