QIA0615007 Powerex, Inc., 173 Pavilion Lane, Youngwood 15697 (724) 925-7272 www.pwrx.com 7-Pack IGBT Module 150 Amperes / 600 Volts Description: Powerex 7-Pack IGBT power module is configured as a full-bridge inverter with an additional IGBT switch and an additional SCR. The Aluminum Silicon Carbide (AlSiC) baseplate offers light weight module design. The power module is designed to operate reliably in harsh aerospace, military and other environments. The module is rated to operate over full temperature range -55C to 125C. Powerex is using High Accelerated Stress Test (HAST) to assure long term reliability of plastic power modules. Features: Class H hybrid screened to MIL-PRF-38534 requirements Withstand HAST Light Weight AlSiC Baseplate Low Drive Requirement Ultra Fast Free Wheeling Diode Internal Zener Protection on Gates High Power Density Aluminum Nitride DBC Ceramic Applications: Aerospace Military Motor Control Preliminary Page 1 http://store.iiic.cc/ 01/29/2008 QIA0615007 Powerex, Inc., 173 Pavilion Lane, Youngwood 15697 (724) 925-7272 www.pwrx.com 7-Pack IGBT Module 150 Amperes / 600 Volts Maximum Ratings, Tj=25C unless otherwise specified Ratings Symbol QIA0615007 Units Collector Emitter Voltage VCES 600 Volts Gate Emitter Voltage VGES 20 Volts Collector Current IC 150 Amperes Peak Collector Current, 1msec ICM 300 Amperes Diode Forward Current IF 150 Amperes Diode Surge Current , 1msec IFM 300 Amperes SCR Forward Current, Tcase= 80C IT(DC) 100 Amperes SCR Surge Current, Half Cycle t=8.3msec ITSM 500 Amperes Junction Temperature Tj 150 C Storage Temperature Tstg -55 to 125 C Mounting Torque, Terminal Screws - 26 in-lb Mounting Torque, Mounting Screws - 26 in-lb - 410 Grams VRMS 2500 Volts Module Weight (Typical) V Isolation Static Electrical Characteristics, Tj=25C unless otherwise specified Characteristic Symbol Test Conditions Min. Typ. Max. Units mA Collector Cutoff Current ICES VCE=VCES VGE=0V - - 1.0 Gate Leakage Current IGES VGE=VGES VCE=0V - - 10.0 A Gate-Emitter Threshold Voltage VGE(th) IC=15mA, VCE=10V 4.0 6.0 7.5 Volts Collector-Emitter Saturation Voltage VCE(sat) IC=150A, VGE=15V - 2.3 2.6 Volts IC=75A, VGE=15V - 1.8 2.1 Volts - - 1600 nC Total Gate Charge QG VCC=300V, IC=150A, VGS=15V Diode Forward Voltage VFM IE=150A, VGS=0V - 2.3 2.6 Volts Regen Diode Forward Voltage VFM IE=50A, VGS=0V - - 2.4 Volts SCR Forward On-State Voltage VTM IF=100A - - 1.35 Volts SCR Reverse Leakage Current, Peak IRRM VRRM=600V - - 15 mA SCR Forward Leakage Current, Peak IDRM VDRM=600V - - 15 mA Dynamic Electrical Characteristics, Tj=25C unless otherwise specified Characteristic Symbol Test Conditions Min. Typ. Max. Units Input Capacitance Cies - TBD nF Coes - - TBD nF Reverse Transfer Capacitance Cres VGE=0V VCE=25V f=1KHz - Output Capacitance - - TBD nF Turn on Delay time td(on) VCC=300V IC=150A VGE1=VGE2=15V RG=20 turn-on RG=10 turn-off - - 900 ns - - 700 ns - - 2.1 s - - 300 ns IF=150A diF/dt=-300A/S - - 170 ns - - 2.5 C Rise Time Turn- off Delay Time tr td(off) Fall Time tf Diode Reverse Recovery Time trr Diode Reverse Recovery Charge Qrr Thermal and Mechanical Characteristics, Tj=25C unless otherwise specified Characteristic Thermal Resistance, Junction to Case Preliminary Symbol Test Conditions Min. Typ. Max. Units RJC IGBT Diode Regen Diode SCR - 0.20 0.38 0.60 0.21 0.24 0.45 0.80 0.27 C/W Page 2 http://store.iiic.cc/ 1/29/2008