Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE147 –
φD+1.0 max.
1.5±0.2
2.0 max. Terminal
(t=0.8)
4.0±0.5
4.0±0.5
(3.5)
Top of spin
Standard terminal type does not require
terminal trimming peocess.
L+2.0 max.
Rated voltage etc. indicate to sleeve.
(10.0)
10.0±0.1
2-φ2.0±0.1
Sleeve
Vent
Polarity bar
Recommended PWB piercing plan
0.8+0.2
–0.1
(φD)
■Features
● Endurance : 105 °C 2000 h
● 30 % smaller than series TS-HB
● RoHS directive compliant
Snap-in Type
Series: HC Type: TS
■Specifi cations
■Di men sions in mm (not to scale)
Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 10 V.DC to 100 V.DC 160 V.DC to 250 V.DC 315 V.DC to 450 V.DC
Nominal Cap. Range820 µF to 100000 µF 150 µF to 3300 µF 39 µF to 1000 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent 3앀CV (µA) max. After 5 minutes application of rated working voltage at +20 °C.
C : Capacitance (µF) V: W.V. (V.DC)
tan δPlease see the attached standard products list
Frequency Correction
Factor for Ripple Current
Frequency (Hz) 50 60 100 120 500 1 k 10 k to
10 V.DC to 100 V.DC /C.F.
0.93 0.95 0.99 1.00 1.05 1.08 1.15
160 V.DC to 450 V.DC /C.F.
0.75 0.80 0.95 1.00 1.20 1.25 1.40
Endurance
After 2000 hours application of DC voltage with specifi ed ripple current (< rated DC working voltage)
at +105 °C
±2 °C
, the capacitors shall meet the following limits.
Capacitance change < ±20 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
(mm)
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE148 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
10
12000 22 25 EETHC1A123HJ 2.20 0.65 200
15000 22 30 EETHC1A153HJ 2.30 0.65 200
18000 22 30 EETHC1A183HJ 2.40 0.65 200
25 25 EETHC1A183JJ 2.40 0.65 200
22000 22 35 EETHC1A223HJ 2.60 0.65 200
25 30 EETHC1A223JJ 2.60 0.65 200
27000
22 40 EETHC1A273HJ 3.10 0.65 200
25 35 EETHC1A273JJ 3.10 0.65 200
30 25 EETHC1A273KJ 3.10 0.65 200
33000 22 45 EETHC1A333HJ 3.40 0.65 200
25 40 EETHC1A333JJ 3.40 0.65 200
39000
25 45 EETHC1A393JJ 3.70 0.71 200
30 30 EETHC1A393KJ 3.70 0.71 200
35 25 EETHC1A393LJ 3.70 0.71 200
47000
25 50 EETHC1A473JJ 4.20 0.79 200
30 35 EETHC1A473KJ 4.20 0.79 100
35 30 EETHC1A473LJ 4.20 0.79 200
56000 30 40 EETHC1A563KJ 5.00 0.88 100
35 35 EETHC1A563LJ 5.00 0.88 100
68000 30 45 EETHC1A683KJ 5.40 1.00 100
35 40 EETHC1A683LJ 5.40 1.00 100
82000 35 45 EETHC1A823LJ 5.90 1.14 100
100000 35 50 EETHC1A104LJ 6.50 1.32 100
16
10000 22 25 EETHC1C103HJ 2.60 0.55 200
12000 22 30 EETHC1C123HJ 2.90 0.55 200
25 25 EETHC1C123JJ 2.90 0.55 200
15000 22 35 EETHC1C153HJ 3.20 0.55 200
18000 22 40 EETHC1C183HJ 3.50 0.55 200
25 30 EETHC1C183JJ 3.50 0.55 200
22000
22 45 EETHC1C223HJ 3.80 0.55 200
25 35 EETHC1C223JJ 3.80 0.55 200
30 25 EETHC1C223KJ 3.80 0.55 200
27000
22 50 EETHC1C273HJ 4.20 0.55 200
25 40 EETHC1C273JJ 4.20 0.55 200
30 30 EETHC1C273KJ 4.20 0.55 200
35 25 EETHC1C273LJ 4.20 0.55 200
33000 25 45 EETHC1C333JJ 4.70 0.55 200
30 35 EETHC1C333KJ 4.70 0.55 100
39000 30 40 EETHC1C393KJ 5.10 0.61 100
35 30 EETHC1C393LJ 5.10 0.61 200
47000 30 45 EETHC1C473KJ 5.50 0.69 100
35 35 EETHC1C473LJ 5.50 0.69 100
56000 30 50 EETHC1C563KJ 6.00 0.78 100
35 40 EETHC1C563LJ 6.00 0.78 100
68000 35 45 EETHC1C683LJ 6.40 0.90 100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE149 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
25
6800 22 25 EETHC1E682HJ 2.40 0.40 200
8200 22 30 EETHC1E822HJ 2.70 0.40 200
25 25 EETHC1E822JJ 2.70 0.40 200
10000 22 35 EETHC1E103HJ 3.00 0.40 200
12000 22 40 EETHC1E123HJ 3.20 0.40 200
25 30 EETHC1E123JJ 3.20 0.40 200
15000
22 45 EETHC1E153HJ 3.60 0.40 200
25 35 EETHC1E153JJ 3.60 0.40 200
30 25 EETHC1E153KJ 3.60 0.40 200
18000
22 50 EETHC1E183HJ 3.90 0.40 200
25 40 EETHC1E183JJ 3.90 0.40 200
30 30 EETHC1E183KJ 3.90 0.40 200
35 25 EETHC1E183LJ 3.90 0.40 200
22000
25 45 EETHC1E223JJ 4.30 0.40 200
30 35 EETHC1E223KJ 4.30 0.40 100
35 30 EETHC1E223LJ 4.30 0.40 200
27000 30 40 EETHC1E273KJ 4.80 0.40 100
35 35 EETHC1E273LJ 4.80 0.40 100
33000 30 45 EETHC1E333KJ 5.50 0.40 100
35 40 EETHC1E333LJ 5.50 0.40 100
39000 30 50 EETHC1E393KJ 5.80 0.46 100
35 45 EETHC1E393LJ 5.80 0.46 100
47000 35 50 EETHC1E473LJ 6.30 0.54 100
35
4700 22 25 EETHC1V472HJ 2.20 0.35 200
5600 22 30 EETHC1V562HJ 2.40 0.35 200
25 25 EETHC1V562JJ 2.40 0.35 200
6800 22 35 EETHC1V682HJ 2.60 0.35 200
8200 22 40 EETHC1V822HJ 2.90 0.35 200
25 30 EETHC1V822JJ 2.90 0.35 200
10000
22 45 EETHC1V103HJ 3.20 0.35 200
25 35 EETHC1V103JJ 3.20 0.35 200
30 25 EETHC1V103KJ 3.20 0.35 200
12000
22 50 EETHC1V123HJ 3.50 0.35 200
25 40 EETHC1V123JJ 3.50 0.35 200
30 30 EETHC1V123KJ 3.50 0.35 200
35 25 EETHC1V123LJ 3.50 0.35 200
15000
25 45 EETHC1V153JJ 3.90 0.35 200
30 35 EETHC1V153KJ 3.90 0.35 100
35 30 EETHC1V153LJ 3.90 0.35 200
18000 30 40 EETHC1V183KJ 4.30 0.35 100
35 35 EETHC1V183LJ 4.30 0.35 100
22000 30 45 EETHC1V223KJ 5.00 0.35 100
35 40 EETHC1V223LJ 5.00 0.35 100
27000 30 50 EETHC1V273KJ 5.30 0.35 100
35 45 EETHC1V273LJ 5.30 0.35 100
33000 35 50 EETHC1V333LJ 5.90 0.35 100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
✽
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE150 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
50
2700 22 25 EETHC1H272HJ 1.80 0.35 200
3300 22 30 EETHC1H332HJ 2.00 0.35 200
3900 22 35 EETHC1H392HJ 2.20 0.35 200
25 25 EETHC1H392JJ 2.20 0.35 200
4700 22 40 EETHC1H472HJ 2.50 0.35 200
25 30 EETHC1H472JJ 2.50 0.35 200
5600
22 45 EETHC1H562HJ 2.80 0.35 200
25 35 EETHC1H562JJ 2.80 0.35 200
30 25 EETHC1H562KJ 2.80 0.35 200
6800
22 50 EETHC1H682HJ 3.30 0.35 200
25 40 EETHC1H682JJ 3.30 0.35 200
30 30 EETHC1H682KJ 3.30 0.35 200
35 25 EETHC1H682LJ 3.30 0.35 200
8200 25 45 EETHC1H822JJ 3.60 0.35 200
30 35 EETHC1H822KJ 3.60 0.35 100
10000
25 50 EETHC1H103JJ 4.00 0.35 200
30 40 EETHC1H103KJ 4.00 0.35 100
35 30 EETHC1H103LJ 4.00 0.35 200
12000 30 45 EETHC1H123KJ 4.50 0.35 100
35 35 EETHC1H123LJ 4.50 0.35 100
15000 30 50 EETHC1H153KJ 4.80 0.35 100
35 40 EETHC1H153LJ 4.80 0.35 100
18000 35 45 EETHC1H183LJ 5.20 0.35 100
63
2200 22 25 EETHC1J222HJ 2.00 0.30 200
2700 22 30 EETHC1J272HJ 2.20 0.30 200
25 25 EETHC1J272JJ 2.20 0.30 200
3300 22 35 EETHC1J332HJ 2.50 0.30 200
3900
22 40 EETHC1J392HJ 2.70 0.30 200
25 30 EETHC1J392JJ 2.70 0.30 200
30 25 EETHC1J392KJ 2.70 0.30 200
4700 22 45 EETHC1J472HJ 3.00 0.30 200
25 35 EETHC1J472JJ 3.00 0.30 200
5600
22 50 EETHC1J562HJ 3.30 0.30 200
25 40 EETHC1J562JJ 3.30 0.30 200
30 30 EETHC1J562KJ 3.30 0.30 200
35 25 EETHC1J562LJ 3.30 0.30 200
6800
25 45 EETHC1J682JJ 3.60 0.30 200
30 35 EETHC1J682KJ 3.60 0.30 100
35 30 EETHC1J682LJ 3.60 0.30 200
8200 30 40 EETHC1J822KJ 3.90 0.30 100
35 35 EETHC1J822LJ 3.90 0.30 100
10000 30 45 EETHC1J103KJ 4.40 0.30 100
35 40 EETHC1J103LJ 4.40 0.30 100
12000 30 50 EETHC1J123KJ 4.80 0.30 100
35 45 EETHC1J123LJ 4.80 0.30 100
15000 35 50 EETHC1J153LJ 5.40 0.30 100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE151 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
80
1200 22 25 EETHC1K122HJ 1.50 0.25 200
1500 22 30 EETHC1K152HJ 1.70 0.25 200
25 25 EETHC1K152JJ 1.70 0.25 200
1800 22 35 EETHC1K182HJ 1.80 0.25 200
2200 22 40 EETHC1K222HJ 2.10 0.25 200
25 30 EETHC1K222JJ 2.10 0.25 200
2700
22 45 EETHC1K272HJ 2.40 0.25 200
25 35 EETHC1K272JJ 2.40 0.25 200
30 25 EETHC1K272KJ 2.40 0.25 200
3300
22 50 EETHC1K332HJ 2.60 0.25 200
25 40 EETHC1K332JJ 2.60 0.25 200
30 30 EETHC1K332KJ 2.60 0.25 200
35 25 EETHC1K332LJ 2.60 0.25 200
3900 25 45 EETHC1K392JJ 3.00 0.25 200
30 35 EETHC1K392KJ 3.00 0.25 100
4700
25 50 EETHC1K472JJ 3.30 0.25 200
30 40 EETHC1K472KJ 3.30 0.25 100
35 30 EETHC1K472LJ 3.30 0.25 200
5600 30 45 EETHC1K562KJ 3.70 0.25 100
35 35 EETHC1K562LJ 3.70 0.25 100
6800 30 50 EETHC1K682KJ 3.90 0.25 100
35 40 EETHC1K682LJ 3.90 0.25 100
8200 35 45 EETHC1K822LJ 4.30 0.25 100
100
820 22 25 EETHC2A821HJ 1.40 0.25 200
1000 22 30 EETHC2A102HJ 1.70 0.25 200
1200 22 30 EETHC2A122HJ 1.80 0.25 200
25 25 EETHC2A122JJ 1.80 0.25 200
1500 22 35 EETHC2A152HJ 2.10 0.25 200
25 30 EETHC2A152JJ 2.10 0.25 200
1800
22 40 EETHC2A182HJ 2.30 0.25 200
25 35 EETHC2A182JJ 2.30 0.25 200
30 25 EETHC2A182KJ 2.30 0.25 200
2200
22 45 EETHC2A222HJ 2.60 0.25 200
25 40 EETHC2A222JJ 2.60 0.25 200
30 30 EETHC2A222KJ 2.60 0.25 200
35 25 EETHC2A222LJ 2.60 0.25 200
2700 25 45 EETHC2A272JJ 2.90 0.25 200
30 35 EETHC2A272KJ 2.90 0.25 100
3300
25 50 EETHC2A332JJ 3.20 0.25 200
30 40 EETHC2A332KJ 3.20 0.25 100
35 30 EETHC2A332LJ 3.20 0.25 200
3900 30 45 EETHC2A392KJ 3.60 0.25 100
35 35 EETHC2A392LJ 3.60 0.25 100
4700 30 50 EETHC2A472KJ 3.80 0.25 100
35 40 EETHC2A472LJ 3.80 0.25 100
5600 35 45 EETHC2A562LJ 4.10 0.25 100
6800 35 50 EETHC2A682LJ 4.50 0.25 100
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE152 –
■Standard Prod ucts
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
160
470 22 25 EETHC2C471HJ 1.40 0.15 200
560 22 30 EETHC2C561HJ 1.50 0.15 200
680 22 30 EETHC2C681HJ 1.70 0.15 200
25 25 EETHC2C681JJ 1.70 0.15 200
820 22 35 EETHC2C821HJ 2.00 0.15 200
25 30 EETHC2C821JJ 2.00 0.15 200
1000
22 40 EETHC2C102HJ 2.20 0.15 200
25 35 EETHC2C102JJ 2.20 0.15 200
30 25 EETHC2C102KJ 2.20 0.15 200
1200
22 45 EETHC2C122HJ 2.30 0.15 200
25 40 EETHC2C122JJ 2.30 0.15 200
30 30 EETHC2C122KJ 2.30 0.15 200
35 25 EETHC2C122LJ 2.30 0.15 200
1500
25 45 EETHC2C152JJ 2.50 0.15 200
30 35 EETHC2C152KJ 2.50 0.15 100
35 30 EETHC2C152LJ 2.50 0.15 200
1800
25 50 EETHC2C182JJ 2.70 0.15 200
30 40 EETHC2C182KJ 2.70 0.15 100
35 30 EETHC2C182LJ 2.70 0.15 200
2200 30 45 EETHC2C222KJ 2.90 0.15 100
35 35 EETHC2C222LJ 2.90 0.15 100
2700 30 50 EETHC2C272KJ 3.10 0.15 100
35 40 EETHC2C272LJ 3.10 0.15 100
3300 35 50 EETHC2C332LJ 3.30 0.15 100
180
470 22 25 EETHC2P471HC 1.45 0.15 200
560 22 30 EETHC2P561HJ 1.50 0.15 200
25 25 EETHC2P561JJ 1.50 0.15 200
680 22 35 EETHC2P681HJ 1.70 0.15 200
25 30 EETHC2P681JJ 1.70 0.15 200
820
22 40 EETHC2P821HJ 2.00 0.15 200
25 30 EETHC2P821JJ 2.00 0.15 200
30 25 EETHC2P821KJ 2.00 0.15 200
1000
22 45 EETHC2P102HJ 2.20 0.15 200
25 40 EETHC2P102JJ 2.20 0.15 200
30 30 EETHC2P102KJ 2.20 0.15 200
35 25 EETHC2P102LJ 2.20 0.15 200
1200
25 45 EETHC2P122JJ 2.30 0.15 200
30 30 EETHC2P122KC 2.30 0.15 200
30 35 EETHC2P122KJ 2.30 0.15 100
1500
25 50 EETHC2P152JJ 2.50 0.15 200
30 40 EETHC2P152KJ 2.50 0.15 100
35 30 EETHC2P152LJ 2.50 0.15 200
1800 30 45 EETHC2P182KJ 2.70 0.15 100
35 35 EETHC2P182LJ 2.70 0.15 100
2200 30 50 EETHC2P222KJ 2.90 0.15 100
35 40 EETHC2P222LJ 2.90 0.15 100
2700 35 50 EETHC2P272LJ 3.10 0.15 100
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE153 –
■Standard Prod ucts
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
200
390 22 25 EETHC2D391HJ 1.31 0.15 200
470 22 30 EETHC2D471HJ 1.45 0.15 200
25 25 EETHC2D471JC 1.45 0.15 200
560 22 30 EETHC2D561HJ 1.67 0.15 200
680 22 40 EETHC2D681HJ 1.75 0.15 200
25 30 EETHC2D681JJ 1.75 0.15 200
820
22 45 EETHC2D821HJ 2.04 0.15 200
25 35 EETHC2D821JJ 2.04 0.15 200
30 25 EETHC2D821KJ 2.04 0.15 200
1000
22 50 EETHC2D102HJ 2.30 0.15 200
25 40 EETHC2D102JC 2.30 0.15 200
25 45 EETHC2D102JJ 2.30 0.15 200
30 30 EETHC2D102KJ 2.30 0.15 200
35 25 EETHC2D102LJ 2.30 0.15 200
1200
25 45 EETHC2D122JC 2.65 0.15 200
25 50 EETHC2D122JJ 2.65 0.15 200
30 35 EETHC2D122KJ 2.65 0.15 100
35 30 EETHC2D122LJ 2.65 0.15 200
1500 30 40 EETHC2D152KJ 2.80 0.15 100
35 30 EETHC2D152LJ 2.80 0.15 200
1800 30 45 EETHC2D182KJ 3.08 0.15 100
35 40 EETHC2D182LJ 3.08 0.15 100
2200 30 50 EETHC2D222KJ 3.48 0.15 100
35 45 EETHC2D222LJ 3.48 0.15 100
220
270 22 25 EETHC2Q271HJ 1.10 0.15 200
330 22 25 EETHC2Q331HJ 1.26 0.15 200
390 22 30 EETHC2Q391HJ 1.34 0.15 200
470
22 35 EETHC2Q471HJ 1.48 0.15 200
25 25 EETHC2Q471JC 1.48 0.15 200
25 30 EETHC2Q471JJ 1.48 0.15 200
560
22 35 EETHC2Q561HC 1.67 0.15 200
22 40 EETHC2Q561HJ 1.67 0.15 200
25 30 EETHC2Q561JJ 1.67 0.15 200
680
22 45 EETHC2Q681HC 1.78 0.15 200
25 35 EETHC2Q681JJ 1.78 0.15 200
30 25 EETHC2Q681KJ 1.78 0.15 200
35 25 EETHC2Q681LJ 1.78 0.15 200
820
22 50 EETHC2Q821HC 2.04 0.15 200
25 40 EETHC2Q821JJ 2.04 0.15 200
30 30 EETHC2Q821KJ 2.04 0.15 200
35 25 EETHC2Q821LJ 2.04 0.15 200
1000
25 45 EETHC2Q102JC 2.33 0.15 200
25 50 EETHC2Q102JJ 2.33 0.15 200
30 35 EETHC2Q102KJ 2.33 0.15 100
35 30 EETHC2Q102LJ 2.33 0.15 200
1200
25 50 EETHC2Q122JC 2.65 0.15 200
30 40 EETHC2Q122KJ 2.65 0.15 100
35 35 EETHC2Q122LJ 2.65 0.15 100
1500
30 45 EETHC2Q152KC 2.80 0.15 100
30 50 EETHC2Q152KJ 2.80 0.15 100
35 40 EETHC2Q152LJ 2.80 0.15 100
1800 30 50 EETHC2Q182KC 3.11 0.15 100
35 45 EETHC2Q182LJ 3.11 0.15 100
2200 35 50 EETHC2Q222LC 3.50 0.15 100
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE154 –
■Standard Prod ucts
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
250
270 22 25 EETHC2E271HJ 1.10 0.15 200
330 22 30 EETHC2E331HJ 1.20 0.15 200
25 25 EETHC2E331JJ 1.20 0.15 200
390
22 30 EETHC2E391HC 1.30 0.15 200
22 35 EETHC2E391HJ 1.30 0.15 200
25 25 EETHC2E391JJ 1.30 0.15 200
470
22 35 EETHC2E471HC 1.40 0.15 200
22 40 EETHC2E471HJ 1.40 0.15 200
25 30 EETHC2E471JJ 1.40 0.15 200
30 25 EETHC2E471KJ 1.40 0.15 200
560
22 40 EETHC2E561HC 1.50 0.15 200
22 45 EETHC2E561HJ 1.50 0.15 200
25 35 EETHC2E561JJ 1.50 0.15 200
30 25 EETHC2E561KJ 1.50 0.15 200
680
22 45 EETHC2E681HC 1.70 0.15 200
22 50 EETHC2E681HJ 1.70 0.15 200
25 40 EETHC2E681JJ 1.70 0.15 200
30 30 EETHC2E681KJ 1.70 0.15 200
35 25 EETHC2E681LJ 1.70 0.15 200
820
25 45 EETHC2E821JJ 2.00 0.15 200
30 35 EETHC2E821KJ 2.00 0.15 100
35 30 EETHC2E821LJ 2.00 0.15 200
1000
25 50 EETHC2E102JC 2.20 0.15 200
30 40 EETHC2E102KJ 2.20 0.15 100
35 30 EETHC2E102LJ 2.20 0.15 200
1200 30 45 EETHC2E122KJ 2.30 0.15 100
35 35 EETHC2E122LJ 2.30 0.15 100
1500 35 45 EETHC2E152LJ 2.50 0.15 100
1800 35 45 EETHC2E182LC 2.50 0.15 100
35 50 EETHC2E182LJ 2.70 0.15 100
315
150 22 25 EETHC2F151HJ 0.82 0.15 200
180 22 30 EETHC2F181HJ 0.90 0.15 200
220 22 30 EETHC2F221HJ 1.00 0.15 200
270 22 40 EETHC2F271HC 1.10 0.15 200
25 30 EETHC2F271JJ 1.10 0.15 200
330
22 45 EETHC2F331HJ 1.20 0.15 200
25 35 EETHC2F331JJ 1.20 0.15 200
30 25 EETHC2F331KJ 1.20 0.15 200
390
22 50 EETHC2F391HC 1.30 0.15 200
25 40 EETHC2F391JJ 1.30 0.15 200
30 30 EETHC2F391KJ 1.30 0.15 200
35 25 EETHC2F391LJ 1.30 0.15 200
470 25 45 EETHC2F471JJ 1.40 0.15 200
30 35 EETHC2F471KJ 1.40 0.15 100
560
25 50 EETHC2F561JJ 1.50 0.15 200
30 40 EETHC2F561KJ 1.50 0.15 100
35 30 EETHC2F561LJ 1.50 0.15 200
680 30 45 EETHC2F681KJ 1.70 0.15 100
35 35 EETHC2F681LJ 1.70 0.15 100
820 30 50 EETHC2F821KJ 2.00 0.15 100
35 40 EETHC2F821LJ 2.00 0.15 100
1000 35 45 EETHC2F102LJ 2.30 0.15 100
✽
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE155 –
■Standard Prod ucts
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
350
120 22 25 EETHC2V121HJ 0.75 0.15 200
150 22 30 EETHC2V151HJ 0.82 0.15 200
180 22 30 EETHC2V181HJ 0.90 0.15 200
25 25 EETHC2V181JJ 0.90 0.15 200
220 22 35 EETHC2V221HJ 1.00 0.15 200
25 30 EETHC2V221JJ 1.00 0.15 200
270
22 40 EETHC2V271HC 1.10 0.15 200
25 35 EETHC2V271JJ 1.10 0.15 200
30 25 EETHC2V271KJ 1.10 0.15 200
330
22 45 EETHC2V331HC 1.20 0.15 200
25 40 EETHC2V331JJ 1.20 0.15 200
30 30 EETHC2V331KJ 1.20 0.15 200
390
25 45 EETHC2V391JJ 1.30 0.15 200
30 30 EETHC2V391KC 1.30 0.15 200
30 35 EETHC2V391KJ 1.30 0.15 100
470
25 50 EETHC2V471JJ 1.40 0.15 200
30 35 EETHC2V471KC 1.40 0.15 100
35 30 EETHC2V471LJ 1.40 0.15 200
560
30 40 EETHC2V561KC 1.50 0.15 100
30 45 EETHC2V561KJ 1.50 0.15 100
35 35 EETHC2V561LJ 1.50 0.15 100
680
30 45 EETHC2V681KC 1.70 0.15 100
30 50 EETHC2V681KJ 1.70 0.15 100
35 40 EETHC2V681LJ 1.70 0.15 100
820 35 45 EETHC2V821LJ 1.90 0.15 100
1000 35 50 EETHC2V102LC 1.90 0.15 100
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE156 –
■Standard Prod ucts
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
400
100 22 25 EETHC2G101HJ 0.70 0.15 200
120 22 30 EETHC2G121HJ 0.75 0.15 200
150 22 30 EETHC2G151HJ 0.88 0.15 200
25 25 EETHC2G151JC 0.88 0.15 200
180 22 35 EETHC2G181HJ 0.95 0.15 200
25 30 EETHC2G181JJ 0.95 0.15 200
220
22 40 EETHC2G221HC 1.10 0.15 200
22 45 EETHC2G221HJ 1.10 0.15 200
25 35 EETHC2G221JJ 1.10 0.15 200
30 25 EETHC2G221KJ 1.10 0.15 200
270
22 45 EETHC2G271HC 1.22 0.15 200
22 50 EETHC2G271HJ 1.22 0.15 200
25 40 EETHC2G271JJ 1.22 0.15 200
30 30 EETHC2G271KJ 1.22 0.15 200
35 25 EETHC2G271LJ 1.22 0.15 200
330
25 45 EETHC2G331JJ 1.44 0.15 200
30 30 EETHC2G331KC 1.44 0.15 200
30 35 EETHC2G331KJ 1.44 0.15 100
35 30 EETHC2G331LJ 1.44 0.15 200
390
25 50 EETHC2G391JJ 1.55 0.15 200
30 35 EETHC2G391KC 1.55 0.15 100
30 40 EETHC2G391KJ 1.55 0.15 100
35 30 EETHC2G391LJ 1.55 0.15 200
470 30 45 EETHC2G471KJ 1.68 0.15 100
35 35 EETHC2G471LJ 1.68 0.15 100
560
30 45 EETHC2G561KC 1.90 0.15 100
30 50 EETHC2G561KJ 1.90 0.15 100
35 40 EETHC2G561LJ 1.90 0.15 100
680 35 45 EETHC2G681LJ 2.12 0.15 100
820 35 50 EETHC2G821LJ 2.30 0.15 100
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE157 –
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
420
100 22 25 EETHC2S101HJ 0.70 0.15 200
120 22 30 EETHC2S121HJ 0.74 0.15 200
25 25 EETHC2S121JJ 0.74 0.15 200
150 22 35 EETHC2S151HJ 0.84 0.15 200
25 30 EETHC2S151JJ 0.84 0.15 200
180
22 40 EETHC2S181HJ 0.91 0.15 200
25 30 EETHC2S181JJ 0.91 0.15 200
30 25 EETHC2S181KJ 0.91 0.15 200
220
22 45 EETHC2S221HJ 1.05 0.15 200
25 35 EETHC2S221JJ 1.05 0.15 200
30 25 EETHC2S221KJ 1.05 0.15 200
270
22 50 EETHC2S271HJ 1.20 0.15 200
25 40 EETHC2S271JJ 1.20 0.15 200
30 30 EETHC2S271KJ 1.20 0.15 200
35 25 EETHC2S271LJ 1.20 0.15 200
330
25 45 EETHC2S331JC 1.42 0.15 200
25 50 EETHC2S331JJ 1.42 0.15 200
30 35 EETHC2S331KJ 1.42 0.15 100
35 35 EETHC2S331LJ 1.42 0.15 100
390
30 40 EETHC2S391KJ 1.55 0.15 100
35 30 EETHC2S391LC 1.55 0.15 200
35 35 EETHC2S391LJ 1.55 0.15 100
470 30 45 EETHC2S471KJ 1.71 0.15 100
35 35 EETHC2S471LJ 1.71 0.15 100
560
30 50 EETHC2S561KJ 1.90 0.15 100
35 40 EETHC2S561LC 1.90 0.15 100
35 45 EETHC2S561LJ 1.90 0.15 100
680 35 45 EETHC2S681LC 2.10 0.15 100
35 50 EETHC2S681LJ 2.10 0.15 100
■Standard Prod ucts
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC
– EE158 –
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
450
100 22 30 EETHC2W101HJ 0.64 0.20 200
25 25 EETHC2W101JJ 0.64 0.20 200
120 22 35 EETHC2W121HJ 0.72 0.20 200
25 30 EETHC2W121JJ 0.72 0.20 200
150
22 35 EETHC2W151HC 0.79 0.20 200
22 40 EETHC2W151HJ 0.79 0.20 200
25 30 EETHC2W151JJ 0.79 0.20 200
30 25 EETHC2W151KJ 0.79 0.20 200
180
22 45 EETHC2W181HJ 0.87 0.20 200
25 35 EETHC2W181JC 0.87 0.20 200
25 40 EETHC2W181JJ 0.87 0.20 200
30 25 EETHC2W181KC 0.87 0.20 200
30 30 EETHC2W181KJ 0.87 0.20 200
220
22 50 EETHC2W221HJ 1.00 0.20 200
25 40 EETHC2W221JC 1.00 0.20 200
25 45 EETHC2W221JJ 1.00 0.20 200
30 30 EETHC2W221KJ 1.00 0.20 200
35 25 EETHC2W221LJ 1.00 0.20 200
270
25 45 EETHC2W271JC 1.19 0.20 200
25 50 EETHC2W271JJ 1.19 0.20 200
30 35 EETHC2W271KC 1.19 0.20 100
30 40 EETHC2W271KJ 1.19 0.20 100
35 30 EETHC2W271LJ 1.19 0.20 200
330
25 50 EETHC2W331JC 1.38 0.20 200
30 40 EETHC2W331KC 1.38 0.20 100
30 45 EETHC2W331KJ 1.38 0.20 100
35 30 EETHC2W331LC 1.38 0.20 200
35 35 EETHC2W331LJ 1.38 0.20 100
390
30 45 EETHC2W391KC 1.55 0.20 100
30 50 EETHC2W391KJ 1.55 0.20 100
35 35 EETHC2W391LC 1.55 0.20 100
35 40 EETHC2W391LJ 1.55 0.20 100
470
30 50 EETHC2W471KC 1.74 0.20 100
35 40 EETHC2W471LC 1.74 0.20 100
35 45 EETHC2W471LJ 1.74 0.20 100
560 35 50 EETHC2W561LJ 1.90 0.20 100
■Standard Prod ucts
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
✽When capacitors of φ35҂45L and φ35҂50L are mount ed on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives in clud ing halogenated compositions.)
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HC (L:20 mm)
– EE159 –
■Standard Prod ucts (L:20 mm)
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
max.
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
200
220 22 20 EETHC2D221HJ 0.85 0.15 200
270 25 20 EETHC2D271JJ 0.95 0.15 200
330 30 20 EETHC2D331KJ 1.10 0.15 200
390 30 20 EETHC2D391KJ 1.20 0.15 200
470 35 20 EETHC2D471LJ 1.41 0.15 200
560 35 20 EETHC2D561LJ 1.48 0.15 200
250
150 22 20 EETHC2E151HJ 0.69 0.15 200
180 25 20 EETHC2E181JJ 0.77 0.15 200
220 30 20 EETHC2E221KJ 0.95 0.15 200
270 30 20 EETHC2E271KJ 1.00 0.15 200
330 35 20 EETHC2E331LJ 1.16 0.15 200
390 35 20 EETHC2E391LJ 1.30 0.15 200
400
56 22 20 EETHC2G560HJ 0.40 0.15 200
68 25 20 EETHC2G680JJ 0.49 0.15 200
82 30 20 EETHC2G820KJ 0.55 0.15 200
100 30 20 EETHC2G101KJ 0.60 0.15 200
120 35 20 EETHC2G121LJ 0.75 0.15 200
150 35 20 EETHC2G151LJ 0.80 0.15 200
450
39 22 20 EETHC2W390HJ 0.36 0.20 200
47 25 20 EETHC2W470JJ 0.41 0.20 200
56 25 20 EETHC2W560JJ 0.43 0.20 200
68 30 20 EETHC2W680KJ 0.50 0.20 200
82 30 20 EETHC2W820KJ 0.53 0.20 200
100 35 20 EETHC2W101LJ 0.61 0.20 200
Endurance : 105 °C 2000 h, Terminal Pitch : 10 mm
Sep. 201000
