72512 TKIM/41098HA (KT)/42294YH (KOTO) 8-7296 No.3906-1/6
http://onsemi.com
Semiconductor Components Industries, LLC, 2013
September, 2013
1SV246
PIN Diode
Dual series PIN Diode for VHF, UHF and AGC
50V, 50mA, rs=typ 5Ω, MCP
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Features
• Series connection of 2 elements in a very small-sized package facilitates high-density mounting and permits
1SV246-applied equipment to be made smaller
•
Small interterminal capacitance (C=0.23pF typ)
•
Small forward series resistance (rs=5Ω typ)
Specifi cations
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Reverse Voltage VR50 V
Forward Current IF50 mA
Allowable Power Dissipation P 100 mW
Junction Temperature Tj 125 °C
Storage Temperature Tstg --55 to +125 °C
Package Dimensions
unit : mm (typ)
7023A-007
Ordering number : EN3906A
Product & Package Information
• Package : MCP
• JEITA, JEDEC : SC-70, SOT-323
•
Minimum Packing Quantity
: 3,000 pcs./reel
Packing Type: TL Marking
Electrical Connection
CV
LOT No.
LOT No.
3
12
TL
1 : Anode
2 : Cathode
3 : Cathode / Anode
MCP
3
12
2.0
0.425
0.425
0.3
0.65
2.1
0.9
1.25
0.3
0.2
0 to 0.08
0.15
1SV246-TL-E
1SV246
No.3906-2/6
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions Ratings Unit
min typ max
Reverse Voltage VRIR=10μA50V
Reverse Current IRVR=50V 0.1 μA
Forward Voltage VFIF=50mA 0.95 V
Interterminal Capacitance C VR=50V, f=1MHz 0.23 pF
Series Resistance
rsIF=10mA, f=100MHz 5.0 Ω
Note : The specifi cations shown above are for each individual diode.
Ordering Information
Device Package Shipping memo
1SV246-TL-E MCP 3,000pcs./reel Pb Free
1SV246
No.3906-3/6
IR -- VR
IF -- VF
rs -- IF
rs -- f
C -- VR
Reverse Current, IR -- nA Forward Current, IF -- mASeries Resistance, rs -- Ω
Series Resistance, rs -- Ω
Rev erse Voltage, VR -- V
Forward Voltage, VF -- V
Interterminal Capacitance, C -- pF
Rev erse Voltage, VR -- V
Frequency, f -- MHz
Forward Current, IF -- mA
3
5
7
2
0.01
3
3
5
5
2
7
7
10
2
3
5
7
100
2
1k
0.1
3
5
7
2
1.0
3
5
7
2
10
3
5
2
3
5
7
0.01
0.1
2
3
5
7
1.0
2
3
5
7
10
2
3
5
7
100
7
2
100
3010
0
0 0.2 0.4 0.6 0.8 1.0 1.2
0.01 35720.1 35721.0 10
3572
20 40 50
Ta=125°C
25
°
C
--55°C
ID00039
ID00037
0.1
2
1.0
2
3
5
7
0.1 1.0
2357 10
23 57 100
23 57
ID00038
1.01.0 23 57
10 23 57
100 1G
23 57
2
3
5
7
10
2
3
5
7
100
2
3
5
7
1k
10k
2
3
5
7
ID00040
ID00041
Ta=25°C
f=100MHz
Ta=100°C
50
°
C
25
°
C
75°C
Ta=25°C
f=1MHz
Ta=25°C
100μA
10mA
1mA
IF=10μA
1SV246
No.3906-4/6
Embossed Taping Specifi cation
1SV246-TL-E
1SV246
No.3906-5/6
Outline Drawing Land Pattern Example
1SV246-TL-E
Mass (g) Unit
0.006
* For reference
mm Unit: mm
0.65 0.65
2.1
0.7
1.0
1SV246
PS No.3906-6/6
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf.
SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
