MCT9001 Dual Phototransistor Optocouplers Features Description Two isolated channels per package The MCT9001 Optocoupler has two channels for density applications. For four channel applications, two-packages fit into a standard 16-pin DIP socket. Each channel is an NPN silicon planar phototransistor optically coupled to a gallium arsenide infrared emitting diode. Two packages fit into a 16 lead DIP socket Underwriters Laboratory (U.L.) recognized File E90700 Applications AC line/digital logic - isolate high voltage transients Digital logic/digital logic - eliminate spurious grounds Digital logic/AC triac control - isolate high voltage transients Twisted pair line receiver - eliminate ground loop feedthrough Telephone/telegraph line receiver - isolate high voltage transients High frequency power supply feedback control - maintain floating grounds and transients Relay contact monitor - isolate floating grounds and transients Power supply monitor - isolate transients Schematic Package Outlines ANODE 1 8 COLLECTOR 8 1 CATHODE 2 ANODE 3 7 EMITTER 6 COLLECTOR 8 CATHODE 4 5 EMITTER 8 1 1 Equivalent Circuit (c)2003 Fairchild Semiconductor Corporation MCT9001 Rev. 1.0.5 www.fairchildsemi.com MCT9001 -- Dual Phototransistor Optocouplers March 2009 Symbol Rating Value Unit TOTAL DEVICE TSTG Storage Temperature -55 to +150 C TOPR Operating Temperature -55 to +100 C TSOL Lead Solder Temperature (wave solder) PD 250 for 10 sec C 400 mW 4.83 mW/C Forward Current - Continuous 60 mA Forward Current - Peak (PW = 1s, 300pps) 3 A Total Device Power Dissipation @ TA = 25C Derate above 25C EMITTER (Each channel) IF IF(pk) VR Reverse Voltage 5.0 V PD LED Power Dissipation @ TA = 25C 100 mW Derate above 25C (Total Input) 1.1 mW/C Collector Current - Continuous 30 mA Detector Power Dissipation @ TA = 25C 150 mW 1.67 mW/C DETECTOR (Each channel) IC PD Derate above 25C (c)2003 Fairchild Semiconductor Corporation MCT9001 Rev. 1.0.5 www.fairchildsemi.com 2 MCT9001 -- Dual Phototransistor Optocouplers Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Individual Component Characteristics Symbol Parameter Test Conditions Min. Typ.* Max. Unit 1.0 1.3 V 10 A EMITTER VF Input Forward Voltage IF = 10mA IR Reverse Current VR = 5V CJ Junction Capacitance VF = 0 V, f = 1MHz 50 pF DETECTOR BVCEO Collector-Emitter Breakdown Voltage IC = 0.5mA, IF = 0 55 V BVECO Emitter-Collector Breakdown Voltage IE = 100A, IF = 0 7 V Collector-Emitter Dark Current VCE = 24V, IF = 0 ICEO 5 VCE = 24V, TA = 85C CCE Capacitance VCE = 0V, f = 1MHz 100 nA 50 A 8 pF Transfer Characteristics Symbol Parameter Test Conditions Min. Typ.* Max. Units SWITCHING TIMES (AC) Non-Saturated ton Turn-on Time toff Turn-off Time RL = 100, IC = 2mA, VCC = 10V 3 s 3 s tr Rise Time 2.4 s tf Fall Time 2.4 s 2.4 s 25.0 s Saturated ton Turn-on Time toff Turn-off Time IF = 16mA, RL = 1.9k, VCE = 5V DC CHARACTERISTICS CTR CTR(sat) VCE(sat) Current Transfer Ratio, Collector-Emitter IF = 5mA, VCE = 5V 50 IF = 8mA, VCE = 0.4V 30 Saturation Voltage IF = 8mA, IC = 2.4mA 600 % % 0.40 V Isolation Characteristics Symbol VISO Characteristic Input-Output Isolation Voltage Test Conditions Min. II-O 10A, t = 1min. 5000 1011 RISO Isolation Resistance VI-O = 500VDC CISO Isolation Capacitance f = 1MHz Typ.* Max. Units Vac(rms) 0.5 pF *All typicals at TA = 25C (c)2003 Fairchild Semiconductor Corporation MCT9001 Rev. 1.0.5 www.fairchildsemi.com 3 MCT9001 -- Dual Phototransistor Optocouplers Electrical Characteristics (TA = 25C unless otherwise specified) MCT9001 -- Dual Phototransistor Optocouplers Typical Performance Curves Fig. 2 Normalized CTR vs. Ambient Temperature Fig. 1 Normalized CTR vs. Forward Current 1.6 1.4 VCE = 5.0V TA = 25C 1.4 1.0 NORMALIZED CTR NORMALIZED CTR 1.2 Normalized to IF = 10mA 0.8 0.6 0.4 IF = 5mA 1.2 1.0 IF = 10mA 0.8 0.6 0.2 0.0 0 5 10 15 IF - FORWARD CURRENT (mA) Normalized to IF = 10mA TA = 25C 0.4 -75 20 -50 -25 0 25 50 75 100 TA - AMBIENT TEMPERATURE (C) 10 0 1000 IF = 10mA VCC = 10V TA = 25C VCE = 10V SWITCHING SPEED (s) ICEO - COLLECTOR-EMITTER DARK CURRENT (A) 10 125 Fig. 4 Switching Speed vs. Load Resistor Fig. 3 Dark Current vs. Ambient Temperature 1 IF = 20mA 10 -1 10 -2 10 -3 10 -4 100 Toff Tf 10 Ton 1 Tr 10 -5 10 -6 0 25 50 75 100 0.1 125 0.1 1 10 R - LOAD RESISTOR (k) TA - AMBIENT TEMPERATURE (C) 100 Fig. 6 Collector-Emitter Saturation Voltage vs. Collector Current Fig. 5 LED Forward Voltage vs. Forward Current 1.8 100 TA = 25C VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) VF - FORWARD VOLTATGE (V) 1.7 1.6 1.5 1.4 TA = 55C 1.3 TA = 25C 1.2 10 1 IF = 2.5mA 0.1 IF = 20mA 0.01 IF = 10mA 1.1 IF = 5mA TA = 100C 1.0 1 10 IF - LED FORWARD CURRENT (mA) (c)2003 Fairchild Semiconductor Corporation MCT9001 Rev. 1.0.5 0.001 0.01 100 0.1 1 10 IC - COLLECTOR CURRENT (mA) www.fairchildsemi.com 4 Through Hole Surface Mount 9.18~10.18 (0.405) 9.18~10.18 (0.405) Pin 1 Pin 1 6.00~7.00 6.00~7.00 3.00~4.00 1.15~1.35 3.00~4.00 4.50 (Typ.) 1.15~1.35 0.35 Typ. 1.00 (Typ.) 2.30~3.30 3.85 Typ. 0.26 Typ. 2.29~2.79 0.40~0.60 7.62 (Typ.) 0.40~0.60 15 (Max.) 2.29~2.79 0.75~1.25 (Both sides 8.15 (Typ.) 9.86~10.46 0.26 (Typ.) 0.4" Lead Spacing Recommend Pad Layout for Surface Mount Leadform 9.18~10.18 (0.405) Pin 1 (1.50) (2.54) 6.00~7.00 (1.30) (10.50) (7.90) 3.00~4.00 1.15~1.35 4.60 (Typ.) (1.04) 15 (Max.) 1.10 (Typ.) 2.30~3.30 2.29~2.79 0.40~0.60 10.16 (Typ.) 0.26 (Typ.) Note: All dimensions are in millimeters. Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2003 Fairchild Semiconductor Corporation MCT9001 Rev. 1.0.5 www.fairchildsemi.com 5 MCT9001 -- Dual Phototransistor Optocouplers Package Dimensions MCT9001 -- Dual Phototransistor Optocouplers Ordering Information Option Example Part Number Description No Option MTC9001 S MTC9001S SD MTC9001SD Surface Mount; Tape and Reel W MTC9001W 0.4" Lead Spacing Standard Through Hole Surface Mount Lead Bend Marking Information 1 V 3 MCT9001 2 XX YY T1 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 Two digit year code, e.g., `03' 5 Two digit work week ranging from `01' to `53' 6 Assembly package code (c)2003 Fairchild Semiconductor Corporation MCT9001 Rev. 1.0.5 www.fairchildsemi.com 6 12.0 0.1 4.90 0.20 4.0 0.1 O1.55 0.05 4.0 0.1 0.30 0.05 1.75 0.10 7.5 0.1 13.2 0.2 10.30 0.20 O1.6 0.1 10.30 0.20 0.1 MAX 16.0 0.3 User Direction of Feed Note: All dimensions are in inches (millimeters) Reflow Profile Temperature (C) 300 215 C, 10-30 s 250 225 C peak 200 150 Time above 183C, 60-150 sec 100 50 Ramp up = 3C/sec 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Time (Minute) * Peak reflow temperature: 225C (package surface temperature) * Time of temperature higher than 183C for 60-150 seconds * One time soldering reflow is recommended (c)2003 Fairchild Semiconductor Corporation MCT9001 Rev. 1.0.5 www.fairchildsemi.com 7 MCT9001 -- Dual Phototransistor Optocouplers Carrier Tape Specifications MCT9001 -- Dual Phototransistor Optocouplers TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EfficentMaxTM EZSWITCHTM * TM (R) Fairchild(R) (R) Fairchild Semiconductor FACT Quiet SeriesTM (R) FACT FAST(R) FastvCoreTM FlashWriter(R) * FPSTM F-PFSTM FRFET(R) SM Global Power Resource Green FPSTM Green FPSTMe-SeriesTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM MotionMaxTM Motion-SPMTM OPTOLOGIC(R) (R) OPTOPLANAR (R) PDP SPMTM Power-SPMTM PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOSTM SyncFETTM (R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM The Power Franchise(R) * EZSWITCHTM and FlashWriter(R) are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I38 (c)2003 Fairchild Semiconductor Corporation MCT9001 Rev. 1.0.5 www.fairchildsemi.com 8