BC857SD87Z - Fairchild Semiconductor Corporation

B2 E2

E1 B1 C2

pin #1

PNP Multi-Chip General Purpose Amplifier

This device is designed for general purpose amplifier applications at collector

currents to 200 mA. Sourced from Process 68.

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

Symbol Parameter Value Units

VCEO Collec t or-Emitter Volt age 45 V

VCES Collec t or-Base Volt age 50 V

VCBO Collec t or-Base Volt age 50 V

VEBO Emi tter-Base Voltage 5.0 V

ICCollect or Current - Continuous 200 mA

TJ, Tstg Operating and Storage Junction Temperat ure Range -55 to +150 °C

1998 Fairchild Semiconductor Corporation

Absolute Maximum Ratings* TA = 25°C unless otherwise noted

Thermal Characteristics TA = 25°C unless otherwise noted

Symbol Characteristic Max Units

BC857S

PDTotal Device Dissipation

Derate above 25°C300

2.4 mW

mW/°C

RθJA Thermal Resis t ance, Junc t i on to A mbient 415 °C/W

BC857S

SC70-6

Mark: 3C

NOTE: The pinouts are symmetrical; pin 1 and pin

4 are interchangeable. Units inside the carrier can

be of either orientation and will not affect the

functionality of the device.

NOTES:

1) These ratings are based on a maximum junction temperature of 150 degrees C.

2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.

3) All voltages (V) and currents (A) are negative polarity for PNP transistors.

BC857S

Electrical Characteristics TA = 25°C unless otherwise noted

OFF CHARACTERISTICS

Symbol Parameter Test Conditions Min Typ Max Units

V(BR)CEO Collec tor-Emitter B reakdown Vol tage IC = 10 mA, IB = 0 45 V

V(BR)CES Collec tor-Base Bre akdown Voltage IC = 10 µA, IE = 0 50 V

V(BR)CBO Collec tor-Base Bre akdown Voltage IC = 10 µA, IE = 0 50 V

V(BR)EBO Emitter-Base Breakdown Voltage IE = 10 µA, IC = 0 5.0 V

ICBO Collecto r-Cutoff Current VCB = 30 V

VCB = 30 V, TA = 150°C15

4.0 nA

µA

ON CHARACTERISTICS

hFE DC Current Gain IC = 2.0 mA, VCE = 5.0 V 125 630

VCE(sat)Collector-Emit ter Saturati on V olt age IC = 10 mA , IB = 0.5 mA

IC = 100 mA, IB = 5.0 mA 0.3

0.65 V

VBE(on)Base-Emitter On Volt age IC = 2.0 mA, VCE = 5.0 V

IC = 10 mA, V CE = 5. 0 V 0.6 0.75

0.82 V

SMALL SIGNAL CHARACTERISTICS

fTCurrent Gain - Bandwidth Product IC = 10 mA , VCE = 5.0,

f = 100 mHz 200 MHz

Cobo Output Capacitance VCB = 10 V, f = 1.0 MHz 3.5 pF

NF Noise Figure IC = 0.2 m A, VCE = 5.0,

RS = 2.0 kΩ, f = 1.0 kHz,

BW = 200 Hz

2.5 dB

Typical Characteristics

NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors.

Typical Pulsed Current Gain

vs Collector Current

0.01 0.1 1 10 100

100

200

300

400

500

I - COLLECTOR CURRENT (mA)

h - TYPICAL PULSED CURRENT GAIN

125 °C

25 °C

- 40 °C

V = 5V

C ollector -Em itter Satur ati o n

Vo ltage vs C o llector Cu rrent

0.1 1 10 100 300

0.05

0.1

0.15

0.2

0.25

0.3

I - COLLECTOR CURRENT (mA)

V - COLL E CT OR EMITT E R VOLTAGE ( V)

CESAT

25 °C

- 4 0 °C

125 °C

β= 10

PNP Multi-Chip General Purpose Amplifier

(continued)

BC857S

Typical Characteristics (continued)

Col lector Saturatio n Region

100 300 700 2000 4000

I - BASE CURRENT (uA)

V - COLLECTO R- EM ITT ER VO LT AGE (V)

50 mA 300 mA

100 u A

Ta = 25°C

Ic =

Ω

CER

Coll ector-Em itter Breakdown

Voltage with Resi stance

Between Emitter-Base

0.1 1 10 100 1000

RE SI STAN CE (k )

BV - BREAKDOWN VOL T AGE (V)

Input and Output Capac itance

vs R ev er se Volta ge

0.1 1 10 100

100

V - COLLECTOR VOLTAGE ( V)

CAP ACITANC E (pF)

Cib

Cob

f = 1.0 MHz

Coll ector-Cutoff Curre nt

vs A mb ient Temp er atu re

25 50 75 100 125

0.01

0.1

100

T - AM BIE NT TEMP ERATURE ( C)

I - C OLLECTOR CU RRENT (nA)

CBO

V = 50V

B ase-Emitter Satur ati o n

Vo ltage vs C o ll ector Cu rrent

0.1 1 10 100 300

0.2

0.4

0.6

0.8

1.2

I - COLLECTOR CURRE NT (mA)

V - BA SE EMITTE R VOLTAGE (V)

BESAT

β= 10

25 °C

- 40 °C

125 °C

Base Emitter ON Voltage vs

C o llector Current

0.1 1 10 100 200

0.2

0.4

0.6

0.8

I - COLLECTOR CURRENT (mA)

V - B ASE EMITTER ON VOLTAGE (V)

BEON

V = 5V

25 °C

- 40°C

125 °C

PNP Multi-Chip General Purpose Amplifier

(continued)

BC857S

PNP Multi-Chip General Purpose Amplifier

(continued)

Typical Characteristics (continued)

Switching Times vs

Collector Current

10 20 30 50 100 200 300

120

150

180

210

240

270

300

I - COLLECTOR CURRENT (mA)

TIME (nS)

IB1 = IB2 = Ic / 10

V = 10 V

tftr

Gain Ba ndwidth Produc t

vs Collecto r Current

1102050100150

I - COLLECTOR CURR ENT ( mA)

f - GAIN BAND WI DT H PRODU CT (MHz )

V = 5V

Power Dissipatio n vs

Amb ien t Temperature

0 255075100125150

100

200

300

400

500

TEM PE RATURE ( C)

P - POWER DISSIPATION (W)

SC70-6

SC70-6 Unit Orientation

SC70-6 Packaging

Configuration: Figure 1.0

Components Leader Tape

500mm min imum or

125 empty poc kets

Tr aile r Tape

300mm min imum or

75 empty poc kets

SC70-6 Tape Leader and Trailer

Configuration: Figure 2.0

Cover Tape

Carrier Tape

Note/Comments

Packaging Option

SC70-6 Packaging Information

Standard

(no flow c ode) D87Z

Packaging type

Reel Size

TNR

7" Dia

TNR

13"

Qty per Reel/Tube/Bag 3,000 10,000

Box Dimension (mm) 184x187x47 343x343x64

Max qty per Box 9,000 30,000

Weight per unit (gm ) 0.0055 0.0055

Weight per Reel (kg) 0.1140 0.3960

F63TNR

Label

Customiz ed Label

Antistatic Cover Tape

184mm x 187mm x 47mm

Pizza Box for Standard Option

F63TNR

Label

F63TNR Barcode Label

F63TNR Label sample

343mm x 342mm x 64mm

Intermediate box for D87Z Option

21 21 21 21

F63TNR

Label

Pi n 1

LOT: CBVK741B019

FSID: FDG6 3 02P

D/C1: D9842 Q TY1: SPEC REV:

SPEC:

QTY: 3000

D/C2: Q TY2: CPN: N/F: F (F63TNR)3

Packaging Description:

SC70-6 parts are shipped in tape. The carrier tape is

made from a dissipative (carbon filled) polycarbonate

resin. The cov er tape is a multilayer film (H eat Activated

Adhesive in nature) primarily composed of polyester film,

adhesive layer, sealant, and anti-static sprayed agent.

These reeled parts in standard option are shipped with

3,0 00 uni ts p er 7" or 17 7cm di amet er re el. The re els are

dark blue in color and is made of polystyrene plastic (anti-

static coated). Other option comes in 10,000 units per 13"

or 330 cm diam eter r eel. T his a nd some othe r opti ons ar e

described in the Packaging Information table.

These full reels are individually barcode labeled and

placed in s ide a pi z za box (illustrated in figure 1.0) made of

recyclable corrugated brown paper with a Fairchild logo

printing. One pizza box contains three reels maximum.

And these pizza boxes are placed inside a barcode

labeled shipping box which comes in different sizes

depending on the num ber of par ts shipped.

Stat ic Dissipativ e

Em b os s e d C arr i er T a pe

SC70-6 Tape and Reel Data

August 1999, Rev . C

SC70-6 Tape and Reel Data, continued

July 1999, Rev . C

A0 D1

Dimensions are in inches and millimeters

Tape Size Reel

Option Dim A Dim B Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL)

8mm 7" Dia 7.00

177.8 0.059

1.5 0.512 +0.020/-0.008

13 +0.5/-0.2 0.795

20.2 2.165

55 0.331 +0.059/-0.000

8.4 +1.5/0 0.567

14.4 0.311 – 0.429

7.9 – 10.9

8m m 13" D ia 13.00

330 0.059

1.5 0.512 +0.020/-0.008

13 +0.5/-0.2 0.795

20.2 4.00

100 0.331 +0.059/-0.000

8.4 +1.5/0 0.567

14.4 0.311 – 0.429

7.9 – 10.9

See detail AA

Dim A

max

13" Diameter Option

7" Diameter Option

Dim A

Max

See detail AA

W2 max Measured at Hub

W1 Measured at Hub

Dim N

Dim D

min

Dim C

B Min

DETAIL AA

Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481

rotational and lateral movement requirements (see sketches A, B, and C).

20 deg maximum component rotation

0.5mm

maximum

0.5mm

maximum

Sketch C (Top View)

Component lateral movement

Typical

component

cavity

center line

20 deg m aximum

Typical

component

center line

Sketch B (Top View)

Component Rotation

Sketch A (Side or F ront Sectional View)

Component Rotation

User Direction of Feed

SC70-6 Embossed Carrier Tape

Configuration: Figure 3.0

SC70-6 Reel Configuration: Figure 4.0

Dimensions are in millimeter

Pkg type

A0 B0 W D0 D1 E1 E2 F P1 P0 K0 T Wc Tc

SC70-6

(8mm)

2.24

+/-0.10 2.34

+/-0.10 8.0

+/-0.3 1.55

+/-0.05 1.125

+/-0.125 1.75

+/-0.10 6.25

min 3.50

+/-0.05 4.0

+/-0.1 4.0

+/-0.1 1.20

+/-0.10 0.255

+/-0.150 5.2

+/-0.3 0.06

+/-0.02

SC70-6 (FS PKG Code 76)

SC70-6 Package Dimensions

March 2000, Rev . B

1:1

Scale 1:1 on letter size paper

Dimensions shown below are in:

inches [millimeters]

Par t Weight per unit (gram): 0.0055

TRADEMARKS

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is

not intended to be an exhaustive list of all such trademarks.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.

As used herein:

1. Life support devices or systems are devices or

systems which, (a) are intended for surgical implant into

the body, or (b) support or sustain life, or (c) whose

failure to perform when properly used in accordance

with instructions for use provided in the labeling, can be

reasonably expected to result in significant injury to the

user.

2. A critical component is any component of a life

support device or system whose failure to perform can

be reasonably expected to cause the failure of the life

support device or system, or to affect its safety or

effectiveness.

PRODUCT ST A TUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information

Preliminary

No Identification Needed

Obsolete

This datasheet contains the design specifications for

product development. Specifications may change in

any manner without notice.

This datasheet contains preliminary data, and

supplementary data will be published at a later date.

Fairchild Semiconductor reserves the right to make

changes at any time without notice in order to improve

design.

This datasheet contains final specifications. Fairchild

Semiconductor reserves the right to make changes at

any time without notice in order to improve design.

This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.

The datasheet is printed for reference information only.

Formative or

In Design

First Production

Full Production

Not In Production

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD

DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT

OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT

RIGHTS, NOR THE RIGHTS OF OTHERS.

PowerTrench

QFET™

QS™

QT Optoelectronics™

Quiet Series™

SILENT SWITCHER

SMART START™

SuperSOT™-3

SuperSOT™-6

SuperSOT™-8

FASTr™

GlobalOptoisolator™

GTO™

HiSeC™

ISOPLANAR™

MICROWIRE™

OPTOLOGIC™

OPTOPLANAR™

PACMAN™

POP™

Rev . G



ACEx™

Bottomless™

CoolFET™

CROSSVOLT™

DOME™

E2CMOSTM

EnSignaTM

FACT™

F ACT Quiet Series™

FAST

SyncFET™

TinyLogic™

UHC™

VCX™

