Part Number: XZM2ACRCY82S 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP Features z Chips can be controlled separately. z Suitable for all SMT assembly and solder process. z Available on tape and reel. z Package: 500pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Notes: Operating Characteristics (TA=25C) 1. All dimensions are in millimeters (inches). M2ACY M2ACR Unit (AlGaInP) (AlGaInP) 2. Tolerance is 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25C) M2ACR M2ACY Unit (AlGaInP) (AlGaInP) Reverse Voltage VR 5 5 V Forward Current IF 50 50 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 150 140 mA Power Dissipation PD 140 125 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number XZM2ACRCY82S Emitting Color Emitting Material Red AlGaInP Yellow AlGaInP Published Date : SEP 13,2010 C Forward Voltage (Typ.) (IF=20mA) VF 2.2 2.0 V Forward Voltage (Max.) (IF=20mA) VF 2.8 2.5 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) P 640 590 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) D 630 589 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) 25 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 27 45 pF Luminous Intensity (IF=50mA) mcd Lens-color Water Clear Drawing No : XDSB5028 V1 Wavelength nm P min. typ. 3600 4990 640 900 1395 590 Checked : B.L.LIU Viewing Angle 2 1/2 100 P.1/6 Part Number: XZM2ACRCY82S 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.2/6 Part Number: XZM2ACRCY82S 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP M2ACR Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.3/6 Part Number: XZM2ACRCY82S 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP M2ACY Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.4/6 Part Number: XZM2ACRCY82S 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.5/6 Part Number: XZM2ACRCY82S 5.0mm x 6.0mm BI-COLOR SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : SEP 13,2010 Drawing No : XDSB5028 XZM2ACRCY82S V1 Checked : B.L.LIU P.6/6