Part Number: XZM2ACRCY82S
5.0mm x 6.0mm BI-COLOR SURFACE
MOUNT LED LAMP
Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.1/6
Features
zChips can be controlled separately.
zSuitable for all SMT assembly and solder process.
zAvailable on tape and reel.
zPackage: 500pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Absolute Maximum Ratings
(TA=25°C)
M2ACR
(AlGaInP)
M2ACY
(AlGaInP) Unit
Reverse Voltage VR 5 5 V
Forward Current IF 50 50 mA
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS 150 140 mA
Power Dissipation PD 140 125 mW
Operating Temperature TA -40 ~ +85
°C
Storage Temperature Tstg -40 ~ +85
M2ACR
(AlGaInP) Unit
Forward Voltage (Typ.)
(IF=20mA) VF 2.2 V
Forward Voltage (Max.)
(IF=20mA) VF 2.8 V
Reverse Current (Max.)
(VR=5V) IR 10 uA
Wavelength of Peak
Emission (Typ.)
(IF=20mA)
λP 640 nm
Wavelength of Dominant
Emission (Typ.)
(IF=20mA)
λD 630 nm
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
Δλ 25 nm
Capacitance (Typ.)
(VF=0V, f=1MHz) C 27 pF
Operating Characteristics
(TA=25°C)
M2ACY
(AlGaInP)
2.0
2.5
10
590
589
20
45
Part
Number
Emitting
Color
Emitting
Material Lens-color
Luminous
Intensity
(IF=50mA)
mcd
Wavelength
nm
λP
Viewing
Angle
2θ1/2
min. typ.
XZM2ACRCY82S
Red AlGaInP
Water Clear
3600 4990 640
Yellow AlGaInP 900 1395 590
100°
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice.
Part Number: XZM2ACRCY82S
5.0mm x 6.0mm BI-COLOR SURFACE
MOUNT LED LAMP
Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.2/6
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner
diameter of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise
pickup and avoid damage during production.
Part Number: XZM2ACRCY82S
5.0mm x 6.0mm BI-COLOR SURFACE
MOUNT LED LAMP
Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.3/6
M2ACR
Part Number: XZM2ACRCY82S
5.0mm x 6.0mm BI-COLOR SURFACE
MOUNT LED LAMP
Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.4/6
M2ACY
Part Number: XZM2ACRCY82S
5.0mm x 6.0mm BI-COLOR SURFACE
MOUNT LED LAMP
Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.5/6
Tape Specification (Units : mm)
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
The device has a single mounting surface. The device
must be mounted according to the specifications.
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity / Luminous Flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Part Number: XZM2ACRCY82S
5.0mm x 6.0mm BI-COLOR SURFACE
MOUNT LED LAMP
Published Date : SEP 13,2010 Drawing No : XDSB5028 V1 Checked : B.L.LIU P.6/6
PACKING & LABEL SPECIFICATIONS XZM2ACRCY82S