19-5584; Rev 10/10 DS9034PCX PowerCap with Crystal www.maxim-ic.com GENERAL DESCRIPTION FEATURES The DS9034PCX PowerCap is designed to be a lithium power source for nonvolatile timekeeping RAMs in Dallas Semiconductor's directly surfacemountable PowerCap Module (PCM) package. After a PowerCap module board has been soldered in place and cleaned, the DS9034PCX PowerCap is placed on top of the PCM board to form a complete PowerCap module package. The PowerCap is keyed to prevent incorrect attachment. Provides 10 Years of Battery Backup Power for Nonvolatile Timekeeping RAMs in the PowerCap Module Package (PCM) Snaps Directly Onto Surface-Mounted PowerCap Module Boards Detachment Feature Allows Easy Removal Compatible with these 34-Pin PowerCap Module Boards: The DS9034PCX can be easily removed by inserting a regular screwdriver into a detachment feature and prying gently outward and upward to release the PowerCap from the PowerCap module board. DS1386P DS1486P DS1643P DS1644P DS1646P DS1647P DS1743P/WP DS1251YP/WP DS1248YP/WP DS1244YP/WP ABSOLUTE MAXIMUM RATINGS Storage Temperature Range: -40C to +85C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to the absolute maximum rating conditions for extended periods may affect device. DS1553P/YP/WP DS1554P/YP/WP DS1556P/YP/WP DS1557P/YP/WP DS1744P/YP/WP DS1746P/YP/WP DS1747P/YP/WP PACKAGE INFORMATION BATTERY CHARACTERISTICS Nominal Voltage: 3V Nominal Capacity: 130mAhr Chemistry: Li(CF)x CRYSTAL CHARACTERISTICS Nominal Frequency: 32.768kHz Load Capacitance: 6pF PIN DESCRIPTION NAME X1, X2 VBAT GND 1 of 4 FUNCTION 32.768kHz Crystal Connections +3V Battery Output Ground DS9034PCX PowerCap with Crystal ORDERING INFORMATION PART DS9034PCX+ DS9034I-PCX+ TEMP RANGE 0C to +70C -40C to +85C VOLTAGE (V) 3.0 3.0 PIN-PACKAGE PCM PCM +Denotes a lead(Pb)-free/RoHS-compliant package. *A "+" on the top of the package indicates a lead(Pb)-free device. PowerCap ATTACHMENT AND REMOVAL 3. Push down and forward with the screwdriver while inserting the PowerCap. This action will "open" the attachment feature. PowerCap REMOVAL 2 of 4 TOP MARK* DS9034PCX DS9034PCXI DS9034PCX PowerCap with Crystal PACKAGE INFORMATION For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a "+", "#", or "-" in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PKG DIM A B C D E MIN 0.845 0.955 0.213 0.065 0.065 INCHES MON 0.850 0.960 0.223 0.070 0.070 MAX 0.855 0.965 0.233 0.075 0.075 ATTENTION: BATTERY COMPONENT The DS9034PCX contains a lithium battery. Do not short, ground, or apply external voltages to the electrical portions of this device. Do not expose to temperatures over +85C. Do not subject this device to any type of cleaning process. Store only in nonconductive containers. Failure to observe these precautions may result in battery discharge or decreased battery life. 3 of 4 DS9034PCX PowerCap with Crystal REVISION HISTORY REVISION DATE 10/10 DESCRIPTION Updated the Features section to remove DS1543P/YP/WP from list of compatible PowerCap module boards, updated the Ordering Information table to remove leaded versions PAGES CHANGED 1, 2 4 of 4 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. M a x i m I n t e g r a t e d P r o d u c t s , 1 2 0 S a n G a b r i e l D r iv e , S u n n y v a le , C A 9 4 0 8 6 4 0 8- 7 3 7 - 7 6 0 0 (c) 2010 Maxim Integrated Products Maxim and the Dallas logo are a registered trademark of Maxim Integrated Products, Inc.