SDR6W series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com DESIGNER'S DATA SHEET 6A 5 sec 1400 to 1800 V Standard Recovery Rectifier Part Number / Ordering Information 1/ SDR6 * __ __ __ Screening2/ __ * = Not Screened S = S Level TX = TX Level TXV = TXV Package __ *= Axial w/ .050" lead diameter A = Axial w/ .040" lead diameter SMS = Surface Mount Square Tab Features: * * * * * * * Voltage R = 1400 V T = 1600 V W = 1800 V * Maximum Ratings Symbol Value Units VRRM 1400 1600 1800 Volts TL @ 1/8" = 25 C max TTAB = 55 C max Io 6 Amps TL @ 1/8" = 25 C max TTAB = 55 C max IFSM 75 Amps TOP & TSTG -65 to +175 C RJL 12 8 C/W SDR6R SDR6T SDR6W Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave) Peak Surge Current 3/ (8.3 ms Pulse, Half Sine Wave) Standard Recovery: 5 usec Maximum High Surge Rating: 75 Amps @ 8.3 mS and 500A @ 100 S Low Reverse Leakage Current: 5 A Low Junction Capacitance: 40 pF Low Thermal Resistance: 8 - 12 C/W Single Chip Construction Available in Fast and Ultra Fast Speeds. Consult Factory. TX, TXV, and S Level Screening2/ Operating & Storage Temperature Maximum Total Thermal Resistance Axial @ 1/8 " SMS 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flow Available on Request. Axial Surface Mount Square Tab (SMS) 3/ Surge rated at 500A maximum, pulse width = 100 sec. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0094B DOC SDR6W series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Electrical Characteristics Instantaneous Forward Voltage Drop (IF = 6A, 300 - 500 sec Pulse) Reverse Leakage Current (100% of rated VR, 300 s pulse min.) Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25C) Junction Capacitance (VR = 10VDC, TA = 25C, f = 1MHz) *Available Part Numbers: SDR6W SDR6T SDR6R Symbol Min Typ Max Units TA = 25C TA = -55C TA = 25C TA = 100C VF1 -- -- 1.25 1.40 5.0 50 VDC IR1 IR2 1.10 1.20 1.0 10 TA = 25C tRR -- 1.5 5 sec TA = 25C CJ -- 22 40 pF SDR6WA SDR6TA SDR6RA Case Outline: (Axial) Case Outline: (SMS) VF2 A SDR6WSMS SDR6TSMS SDR6RSMS DIM MIN MAX A B C (std) C (A outline) D -- 0.135" 0.047" 0.037" 1.00" 0.168" 0.156" 0.053" 0.043" -- DIM MIN MAX A B C D 0.173" 0.180" 0.022" 0.002" 0.177" 0.210" 0.028" -- Note: Dimensions prior to soldering. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0094B DOC