B44
Box type Pin Header to Prevent Mis-insertion
HIF3F Series
■Features
1. Prevent to Reverse Insertion
The pin header to prevent reverse insertion is equipped
with contact protective walls to the HIF3E series.
2. Compatibility
This pin header is compatible with HIF3B series.
■Applications
Computers, terminal equipment, PPC, various kinds of
electronic equipment, office automation machines, etc.
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
500 cycles
Solder bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
(–55ç: 30 minutes ➝15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles
1000M ohms min.
No flashover or insulation breakdown.
15m ohms max.
No electrical discontinuity of 1μs or more
Insulation resistance: 1000M ohms min.
Contact resistance15m ohms max.
No deformation of components affecting performance.
No damage, cracks, or parts looseness.
1.
Insulation Resistance
2.
Withstanding voltage
3.
Contact Resistance
4. Vibration
5.
Humidity (Steady state)
7.
Durability (Mating/un-mating)
8. Resistance to
Soldering heat
6.
Temperature Cycle
Rating Current rating: 1A
Voltage rating: 200V AC
Operating Temperature Range:–55 to +85ç(Note 1)
Operating Moisture Range:40 to 80%
Storage Temperature Range:–10 to +60ç(Note 2)
Storage Humidity Range:40 to 70%(Note 2)
■Product Specifications
Item Specification Condition
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and
specifications for a specific part number shown.
■Material
Part Material Finish Remarks
Insulator
Contact PBT
Brass Black
Selective gold plating over nickel underplated
UL94V-0
---------------
■Ordering Information
HIF3F - *P A - 2.54 DS
1 2 53 4 6
Series Name: HIF3F
Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, 60
P: Pin header
A: Selective gold plating
Contact Pitch: 2.54mm
1
25
6
3
4
Terminal type DS: Right angle type
DSA: Straight type
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B45
HIF3F Series●Box type Pin Header to Prevent Mis-insertion
■Straight Pin Header
Part Number CL No.
Unit: mm
615-0061-3-71
615-0062-6-71
615-0063-9-71
615-0064-1-71
615-0065-4-71
615-0066-7-71
615-0067-0-71
615-0068-2-71
615-0069-5-71
HIF3F-10PA-2.54DSA(71)
HIF3F-16PA-2.54DSA(71)
HIF3F-20PA-2.54DSA(71)
HIF3F-26PA-2.54DSA(71)
HIF3F-30PA-2.54DSA(71)
HIF3F-34PA-2.54DSA(71)
HIF3F-40PA-2.54DSA(71)
HIF3F-50PA-2.54DSA(71)
HIF3F-60PA-2.54DSA(71)
Number of Contacts
10
16
20
26
30
34
40
50
60
A B C RoHS
20.5
28.1
33.2
40.8
45.9
51.0
58.6
71.3
84.0
17.5
25.1
30.2
37.8
42.9
48.0
55.6
68.3
81.0
10.16
17.78
22.86
30.48
35.56
40.64
48.26
60.96
73.66
YES
Note: The slot size for false-insertion for 50 contact and 60 contact connectors is 26.96.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B46
HIF3F Series●Box type Pin Header to Prevent Mis-insertion
■Right Angle Pin Header
Part Number CL No.
Unit: mm
615-0041-6-71
615-0042-9-71
615-0043-1-71
615-0044-4-71
615-0045-7-71
615-0046-0-71
615-0047-2-71
615-0048-5-71
615-0049-8-71
HIF3F-10PA-2.54DS(71)
HIF3F-16PA-2.54DS(71)
HIF3F-20PA-2.54DS(71)
HIF3F-26PA-2.54DS(71)
HIF3F-30PA-2.54DS(71)
HIF3F-34PA-2.54DS(71)
HIF3F-40PA-2.54DS(71)
HIF3F-50PA-2.54DS(71)
HIF3F-60PA-2.54DS(71)
Number of Contacts
10
16
20
26
30
34
40
50
60
A B C RoHS
20.5
28.1
33.2
40.8
45.9
51.0
58.6
71.3
84.0
17.5
25.1
30.2
37.8
42.9
48.0
55.6
68.3
81.0
10.16
17.78
22.86
30.48
35.56
40.64
48.26
60.96
73.66
YES
Note: The slot size for false-insertion for 50 contact and 60 contact connectors is 26.96.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
