RN2961FS~RN2966FS
2007-11-01
1
TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT process) (Bias Resistor built-in Transistor)
RN2961FS,RN2962FS,RN2963FS
RN2964FS,RN2965FS,RN2966FS
Switching, Inverter Circuit, Interface Circuit and
Driver Circuit Applications
• Two devices are incorporated into a fine pitch Small Mold (6 pin)
package.
• Incorporating a bias resistor into a transistor reduces parts count.
Reducing the parts count enable the manufacture of ever more
compact equipment and save assembly cost.
• Complementary to RN1961FS~RN1966FS
Equivalent Circuit and Bias Resistor Values
Absolute Maximum Ratings (Ta = 25°C) (Q1, Q2 common)
Characteristics Symbol Rating Unit
Collector-base voltage VCBO −20 V
Collector-emitter voltage
RN2961FS~2966FS
VCEO −20 V
RN2961FS~2964FS −10
Emitter-base voltage
RN2965FS, 2966FS
VEBO
−5
V
Collector current IC −50 mA
Collector power dissipation PC (Note 1) 50 mW
Junction temperature Tj 150 °C
Storage temperature range
RN2961FS~2966FS
Tstg −55~150 °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Total rating
Unit: mm
fS6
1.EMIITTER1
2.EMITTER2
3.BASE2
4.COLLECTOR2
5.BASE1
6.COLLECTOR1
0.15±0.0
5
0.1±0.05
6
0.8±0.05
1.0±0.05
0.7±0.0
5
1
2
0.1±0.05
0.3
5
0.3
5
3
1.0±0.05
0.1±0.05
5
4
0.4
8
+0.02
-0.0
4
(E1)
(E2)
(B2)
(C2)
(B1)
(C1)
JEDEC ―
JEITA ―
TOSHIBA 2-1F1C
Weight: 0.001 g (typ.)
6 54
1 2 3
Q1 Q2
Type No. R1 (kΩ) R2 (kΩ)
RN2961FS 4.7 4.7
RN2962FS 10 10
RN2963FS 22 22
RN2964FS 47 47
RN2965FS 2.2 47
RN2966FS 4.7 47
R1
R2
B
C
E
Equivalent Circuit
(top view)
RN2961FS~RN2966FS
2007-11-01
2
Electrical Characteristics (Ta = 25°C) (Q1, Q2 common)
Characteristics Symbol Test Condition Min Typ. Max Unit
ICBO V
CB = −20 V, IE = 0 ⎯ ⎯ −100
Collector cut-off current RN2961FS~2966FS
ICEO V
CE = −20 V, IB = 0 ⎯ ⎯ −500
nA
RN2961FS −0.89 ⎯ −1.33
RN2962FS −0.41 ⎯ −0.63
RN2963FS −0.18 ⎯ −0.29
RN2964FS
VEB = −10 V, IC = 0
−0.088 ⎯ −0.133
RN2965FS −0.085 ⎯ −0.127
Emitter cut-off current
RN2966FS
IEBO
VEB = −5 V, IC = 0
−0.08 ⎯ −0.121
mA
RN2961FS 30 ⎯ ⎯
RN2962FS 60 ⎯ ⎯
RN2963FS 100 ⎯ ⎯
RN2964FS 120 ⎯ ⎯
RN2965FS 120 ⎯ ⎯
DC current gain
RN2966FS
hFE VCE = −5 V,
IC = −10 mA
120 ⎯ ⎯
Collector-emitter
saturation voltage RN2961FS~2966FS VCE (sat) IC = −5 mA,
IB = −0.25 mA ⎯ ⎯ −0.15 V
RN2961FS −1.0 ⎯ −2.0
RN2962FS −1.0 ⎯ −2.2
RN2963FS −1.1 ⎯ −2.7
RN2964FS −1.2 ⎯ −3.6
RN2965FS −0.6 ⎯ −1.1
Input voltage (ON)
RN2966FS
VI (ON) VCE = −0.2 V,
IC = −5 mA
−0.6 ⎯ −1.2
V
RN2961FS~2964FS −0.8 ⎯ −1.5
Input voltage (OFF)
RN2965FS, 2966FS
VI (OFF) VCE = −5 V,
IC = −0.1 mA −0.4 ⎯ −0.8
V
Collector output
capacitance RN2961FS~2966FS Cob VCB = −10 V, IE = 0,
f = 1 MHz ⎯ 1.2 ⎯ pF
RN2961FS 3.76 4.7 5.64
RN2962FS 8 10 12
RN2963FS 17.6 22 26.4
RN2964FS 37.6 47 56.4
RN2965FS 1.76 2.2 2.64
Input resistor
RN2966FS
R1 ⎯
3.76 4.7 5.64
kΩ
RN2961FS~2964FS 0.8 1.0 1.2
RN2965FS 0.0376 0.0468 0.0562
Resistor ratio
RN2966FS
R1/R2 ⎯
0.08 0.1 0.12
RN2961FS~RN2966FS
2007-11-01
3
(Q1,Q2 common)
IC - VI(ON)
-0.1
-1
-10
-100
-0.1 -1 -10 -100
INPUT VOLTAGE VI(ON) ( V)
EMMITER COMMON
VCE= -0.2V
25
-25
RN2961FS IC - VI(ON)
-0.1
-1
-10
-100
-0.1 -1 -10 -100
INPUT VOLTAGE VI(ON) ( V)
EMMITER COMMON
VCE= -0.2V
25
-25
RN2962FS
IC - VI(ON)
-0.1
-1
-10
-100
-0.1 -1 -10 -100
INPUT VOLTAGE VI(ON) ( V)
EMMITER COMMON
VCE= -0.2V
25
-25
RN2693FS IC - VI(ON)
-0.1
-1
-10
-100
-0.1 -1 -10 -100
INPUT VOLTAGE VI(ON) ( V)
EMMITER COMMON
VCE= -0.2V
25
-25
RN2694FS
IC - VI(ON)
-0.1
-1
-10
-100
-0.1 -1 -10 -100
INPUT VOLTAGE VI(ON) ( V)
EMMITER COMMON
VCE= -0.2V
25
-25
RN2965FS IC - VI(ON)
-0.1
-1
-10
-100
-0.1 -1 -10 -100
INPUT VOLTAGE VI(ON) ( V)
EMMITER COMMON
VCE= -0.2V
25
-25
RN2966FS
COLLECTOR CURRENT IC
(
mA
)
COLLECTOR CURRENT IC
(
mA
)
COLLECTOR CURRENT IC
(
mA
)
COLLECTOR CURRENT IC
(
mA
)
COLLECTOR CURRENT IC
(
mA
)
COLLECTOR CURRENT IC
(
mA
)
Ta=100°C Ta=100°C
Ta=100°C
Ta=100°C
Ta=100°C
Ta=100°C
RN2961FS~RN2966FS
2007-11-01
4
(Q1,Q2 common)
IC - VI(OFF)
-10
-100
-1000
-10000
-0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2
INPUT VOLTAGE VI(OFF) ( V)
EMITTER COMMON
VCE= -5V
25 -25
RN2961FS IC - VI(OFF)
-10
-100
-1000
-10000
-0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2
INPUT VOLTAGE VI(OFF) ( V)
EMITTER COMMON
VCE= -5V
25
IC - VI(OFF)
-10
-100
-1000
-10000
-0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2
INPUT VOLTAGE VI(OFF) ( V)
EMITTER COMMON
VCE= -5V
25 -25
RN2963FS IC - VI(OFF)
-10
-100
-1000
-10000
-0.4 -0.6 -0.8 -1 -1.2 -1.4 -1.6 -1.8 -2
INPUT VOLTAGE VI(OFF) ( V)
EMITTER COMMON
VCE= -5V
25
-25
RN2964FS
IC - VI(OFF)
-10
-100
-1000
-10000
-0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4
INPUT VOLTAGE VI(OFF) ( V)
EMITTER COMMON
VCE= -5V
-25
0
IC - VI(OFF)
-10
-100
-1000
-10000
-0 -0.2 -0.4 -0.6 -0.8 -1 -1.2 -1.4
INPUT VOLTAGE VI(OFF) ( V)
EMITTER COMMON
VCE= -5V
25
-25
RN2966FS
0
Ta=100°C Ta=100°C
Ta=100°C
Ta=100°C
Ta=100°C Ta=100°C
COLLECTOR CURRENT IC
(μ
A
)
COLLECTOR CURRENT IC
(μ
A
)
COLLECTOR CURRENT IC
(μ
A
)
COLLECTOR CURRENT IC
(μ
A
)
COLLECTOR CURRENT IC
(μ
A
)
COLLECTOR CURRENT IC
(μ
A
)
25
-25
RN2962FS
RN2965FS
RN2961FS~RN2966FS
2007-11-01
5
(Q1,Q2 common)
hFE - IC
1
10
100
1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
DC CURRENT GAIN hFE
EMITTER COMMON
VCE= -5V
25
-25
RN2961FS hFE - IC
10
100
1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
DC CURRENT GAIN hFE
EMITTER COMMON
VCE= -5V
25
-25
RN2962FS
hFE - IC
10
100
1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
DC CURRENT GAIN hFE
EMITTER COMMON
VCE= -5V
25
-25
RN2963FSRN2963FS hFE - IC
10
100
1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
DC CURRENT GAIN hFE
EMITTER COMMON
VCE= -5V
25
-25
RN2964FS
hFE - IC
10
100
1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
DC CURRENT GAIN hFE
EMITTER COMMON
VCE= -5V
25
-25
hFE - IC
10
100
1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
DC CURRENT GAIN hFE
EMITTER COMMON
VCE= -5V
25
-25
Ta=100°C
Ta=100°C
Ta=100°C
Ta=100°C
Ta=100°C
Ta=100°C
RN2965FS RN2966FS
RN2961FS~RN2966FS
2007-11-01
6
(Q1,Q2 common)
VCE(sat) - IC
-10
-100
-1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
EMITTER COMMON
IC / IB=20
25
-25
RN2961FS VCE(sat) - IC
-10
-100
-1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
EMITTER COMMON
IC / IB=20
25
-25
RN2962FS
VCE(sat) - IC
-10
-100
-1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
EMITTER COMMON
IC / IB=20
25
-25
RN2963FS VCE(sat) - IC
-10
-100
-1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
EMITTER COMMON
IC / IB=20
25
-25
VCE(sat) - IC
-10
-100
-1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
COLLECTOR-EMITTER SATURATION
VOLTAGE VCE(sat) (mV)
EMITTER COMMON
IC / IB=20
25
-25
RN2965FS VCE(sat) - IC
-10
-100
-1000
-1 -10 -100
COLLECTOR CURRENT IC (mA)
COLLECTER-EMITTOR SATURATION
VOLTAGE VCE(sat) (mV)
EMITTER COMMON
IC / IB=20
25
-25
RN2966FS
Ta=100°C Ta=100°C
Ta=100°C
Ta=100°C
Ta=100°C Ta=100°C
RN2964FS
RN2961FS~RN2966FS
2007-11-01
7
Type Name Marking
RN2961FS
RN2962FS
RN2963FS
RN2964FS
RN2965FS
RN2966FS
Handling Precaution
When handling individual devices (which are not yet mounted on a circuit board), be sure that the environment is
protected against electrostatic electricity. Operators should wear anti-static clothing, and containers and other objects
that come into direct contact with devices should be made of anti-static materials.
Type name
K0
1 2 3
4 5 6
Type name
K1
1 2 3
4 5 6
Type name
K2
1 2 3
4 5
6
Type name
K3
1 2 3
45
6
Type name
K4
1 2 3
4 5
6
Type name
K5
1 2 3
4 5
6
RN2961FS~RN2966FS
2007-11-01
8
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
• Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINF RINGEMEN T.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
