9R28016000100 - Belden Wire & Cable Company

9R28016 Flat - Rainbow 9R280XX Series

For more information please

call

1-800-Belden1

See Put-ups and Colors

Description:

Belden's .050" pitch, color-coded PVC flat cable allows for quick identification and circuit tracing, along with easy breakouts for circuit

routing, and is designed for mass-termination with standard IDC connectors.

PHYSICAL CHARACTERISTICS:

CONDUCTOR:

Number of Conductors 16

Total Number of Conductors 16

AWG 28

Stranding 7x36

Conductor Material TC - Tinned Copper

INSULATION:

Insulation Material PVC - Polyvinyl Chloride

Nom. Insulation Wall Thickness .010 in.

Insulation Resistance >10, 000 Mega Ohms

Insulation Color Code Chart :

Number Color

1 Brown

2 Red

3 Orange

4 Yellow

5 Green

6 Blue

Number Color

7 Purple

8 Gray

9 White

10 Black

Over 10 conductors Repeat as required

INSULATION:

Substrate Thickness and Material .010" Clear PVC

SPACING:

Conductor Spacing Center to Center .050 +/- .005 in.

Conductor Spacing Outside Center to Outside Center .75 +/- .011 in.

OVERALL:

Overall Nominal Width .80 in.

Overall Nominal Thickness .042 +/-.003 in.

Page 1 of

9R28016 Flat - Rainbow 9R280XX Series

OUTER SHIELD:

Outer Shield Material Unshielded

MECHANICAL CHARACTERISTICS:

Operating Temperature Range -20°C To +105°C

APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE:

APPLICABLE STANDARDS:

UL AWM Style 2884

UL Rating 105°C, 300 V RMS, VW-1

EU CE Mark (Y/N) Yes

EU RoHS Compliant (Y/N) Yes

EU RoHS Compliance Date (mm/dd/yyyy): 10/01/2005

FLAME TEST:

UL Flame Test VW-1

PLENUM/NON-PLENUM:

Plenum (Y/N) N

ELECTRICAL CHARACTERISTICS:

Nom. Characteristic Impedance :

Description Nom. Characteristic Impedance (Ohms)

(GS) 150

(GSG) 105

Nom. Inductance :

Description Nominal Inductance (µH/ft)

@ 1 MHz (GS) .29

@ 1 MHz (GSG) .20

Nom. Capacitance Conductor to Conductor :

Description Nom. Capacitance Conductor to Conductor (pF/ft)

@ 1 kHz (GSG) 18

@ 1 MHz (GS) 10

@ 1 MHz (GSG) 15

Nominal Velocity of Propagation :

Description Nominal Velocity of Propagation (%)

Nominal Delay 1.40 NS/FT. (GSG) ns/ft

Nom. Conductor DC Resistance @ 20 Deg. C 68.2 OHMS/1000 FT. MAX. Ohms/1000 ft

Nom. Attenuation :

Page 2 of

9R28016 Flat - Rainbow 9R280XX Series

Description Frequency (MHz) Nom. Attenuation (dB/100 ft.)

10 2.8

20 4.8

30 6.5

40 8.3

50 9.8

60 12

70 13

80 14

90 15.8

100 17

Typical Unbalanced Crosstalk :

Description Pulse Rise Time (NS) Near End (%) Far End (%) Typical Unbalanced

Crosstalk (dB)

10 ft. sample length 3 4.8 7

10 ft. sample length 5 3.5 4.7

10 ft. sample length 7 3 3

Max. Operating Voltage - UL 300 V RMS

Max. Recommended Current 1 Amp per conductor @ 20°C

Dielectric Withstand Voltage 2, 000 V RMS

NOTES:

Notes GS=Ground-Signal Mode; GSG=Ground-Signal-Ground Mode

PUT-UPS AND COLORS:

Item Description Put-Up (ft.) Ship Weight (lbs.) Jacket Color Notes

9R28016 000100 16 #28 PVC

RAINBOW 100 2.7 NONE

E = MAY CONTAIN MORE THAN 1 PIECE. MINIMUM LENGTH OF ANY ONE PIECE IS 25'

Revision Number: 1 Revision Date: 10-11-2005

Page 3 of

9R28016 Flat - Rainbow 9R280XX Series

Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication,

information and specifications described herein are subject to error or omission and to change without notice, and the listing of such

information and specifications does not ensure product availability.

Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express,

statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or

exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract,

negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described

herein.

All sales of Belden products are subject to Belden's standard terms and conditions of sale.

Belden CDT Electronics Division believes this product to be in compliance with the following environmental regulations: California

Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS

(Directive 2002/95/EC, 27-Jan-2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our

Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR

(Directive 2003/11/EC, 6-Feb-2003). The information provided in this Product Disclosure, and the identification of materials listed as

reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its

publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any

other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality

specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of

legislation and regulations based on their individual usage of the product.

Belden CDT Electronics Division declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended

by directive 93/68/EEC.

Page 4 of