19
Attenuators
01 - 06 + 0.30 *
07 - 10 + 0.50
ATT-0311-XX-SMA-02 11 - 20 + 0.75
21 - 30 + 1.00
SMA Connector - Attenuators
01 - 06 + 0.30
ATT-0300--XX-SMA-02 07 - 10 + 0.50 1
11 - 20 + 0.75
Model No. Attenuation VSWR Fig.Fig.
Fig.Fig.
Fig.
Flange Mounted - Integrated Design
DC - 18 GHz Performance
Tab, Slot, or Rod Contact for Microstrip use
Interchangeable Transition Contact Pins
Reduces Package Size and Weight
This series of SMA flange mounted Connector-Attenuators are ideally
suited for use on microstrip packages where size and weight are a
consideration. By combining the Attenuator and the launching Connec-
tor, space and weight as well as cost savings is accomplished. The
resistive film circuit is designed to improve reliability and lower mismatch
losses by eliminating the need for separate coaxial components. The
units exhibit low VSWR and are ruggedly constructed of stainless steel
and are temperature stabilized for use in hostile environments.
01 - 06 + 0.30 *
07 - 10 + 0.50
ATT-0310--XX-SMA-02 11 - 20 + 0.75
21 - 30 + 1.00
01 - 06 + 0.30 *
07 - 10 + 0.50
ATT-0312-XX-SMA-02 11 - 20 + 0.75
21 - 30 + 1.00
01 - 06 + 0.30 *
07 - 10 + 0.50
ATT-0314-XX-SMA-02 11 - 20 + 0.75
21 - 30 + 1.00
Note: When ordering, replace "XX" in Model No. with desired Attenuation Value.
Interchangeable center pin must be ordered separately, see Part No's below.
* From 12.4 to 18 GHz, Attenuation accuracy is + 0.40 dB
Figure 1 - non- removeable tab contact
Notes:
1. Select desired length of interchangeable center pins in accordance with package
requirements and substitue the three digit decimal length for "YYY" in the Part No.
2. All Attenuator Models are rated at 2 Watts Average and 200 Watts Peak.
3. Finish : Housings are Passivated Stainless Steel, Center Pins are gold plated.
Part No. PPM-0040-06-YYY-01Part No. PPM-0030-05-YYY-01
Part No. PPM-0020-CC-YYY-01
Interchangeable Pin Configurations
Figure 5
Figure 4
Figure 3
Figure 2
1.50@12.4 - 18 GHz
1.20 @ DC - 4 GHz
3 3
3 3
3
1.50 @12.4 - 18 GHz
1.25 @ 4-12.4 GHz
1.15 @ DC - 4 GHz
4 4
4 4
4
5 5
5 5
5
1.50 @12.4 - 18 GHz
1.25 @ 4-12.4 GHz
1.15 @ DC - 4 GHz
1.50 @ 12.4 - 18 GHz
1.25 @ 4-12.4 GHz
1.15 @ DC - 4 GHz
1.50 @12.4 - 18 GHz
1.25 @ 4-12.4 GHz
1.15 @ DC - 4 GHz
1.35 @ 4 - 12.4 GHz
Bd AMID BMID
21-1 )6.51(516.)5.9(573.
03-31 )4.91(567.)3.31(525.
2 2
2 2
2
"CC" "C"MID+200.
10-210.0
20-810.0
30-820.0
40-630.0
