THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS STRATUM 3E 5V HCMOS OCXO ABSOLUTE M AXIMUM RATING S PARAMETER Storage Temperature UNITS MINIMUM -55 NOMINAL - MAXIMUM 100 UNITS C (Vcc) -0.5 - 7 Vdc MINIMUM 3.2 -0.6 -10 -2 -100 -20 NOMINAL 5.00E-11 - MAXIMUM 38.88 0.6 10 2 100 70 UNITS MHz ppm ppb ppb/day ppb RMS C 4.75 -1.0 -100 - 5.00 - 5.25 1.0 3.5 1.5 100 5 Vdc ppb W W ppb ppb/G MINIMUM 12 4.2 45 - NOMINAL 15 50 - - - MAXIMUM 18 0.4 55 5 -100 2 2 -70 -100 -120 -140 UNITS pF Vdc Vdc % nS dBc ps rms ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz SSB Phase Noise at 10KHz offset - - -140 dBc/Hz SSB Phase Noise at 100KHz offset - - -140 dBc/Hz Supply Voltage OPERATING SPECIFIC ATIONS PARAMETER Center Frequency Frequency Calibration Frequency Stability Aging: Daily Aging: First Year Aging: Short Term (1Sec.) Operating Temperature Range (Vcc) HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% Spurious Output Jitter (BW=10Hz to 20MHz) Period Jitter SSB Phase Noise at 1Hz offset SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset Notes: 1) 2) 3) 4) 5) 6) 7) 0624 OFC5EF3ABG 32.000 MHz OFC5EF3ABG NOTE 1 2 DESCRIPTION The Connor-Winfield OFC5EF3ABG is a 5V Oven Controlled Crystal Oscillator (OCXO) with HCMOS output. The OFC5EF3ABG is designed for 3E applications requiring low jitter and tight frequency stability. 3 4 5 6 7 TABLE 3.0 (Voh) (Vol) PACKAGE CHARACTERISTICS Package NOTE TABLE 2.0 (Fo) Supply Voltage Voltage Stability (+/-1%) Power Consumption: Turn On Power Consumption: Steady-State Warm Up 2G Tip-over I( W TABLE 1.0 NOTE FEATURES FIXED FREQUENCY FREQUENCY STABILITY: 10ppb TEMPERATURE RANGE: -20 to 70C 5.0V OPERATION HCMOS OUTPUT HERMETICALLY SEALED PACKAGE RoHD COMPLIANT / LEAD FREE TABLE 4.0 Metal package: resistive welded, grounded case, solder tinned pins. Initial calibration @ 25C, at time of shipment. Frequency vs. temperature stabilit y, referenced to 25C Allen Variance: 1 second, 100 avera ge. Frequency vs. change in supply voltage, referenced to 5.00 Vdc. Vcc = 5.0Vdc. Measured @ 25C. Measured @-20C, within 10 minutes, referenced one hour after turn-on. ORDERING INFORMATION OFC5EF3ABG OCXO SERIES - 32.000MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Cx097 PAGE 1 OF 2 REV: 00 DATE: 05/17/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55C to 125C, 20 cycles,10 minute dwell, 1m inute transition. Gross Leak Test: Per MIL-STD-202, Method 112, Condition D. No bubbles in flourinert (FC-43) at 125C 5C for 20 seconds. SOLDERING Pin Solderability: Per MIL-STD-883, Method 2003. 8 hour steam age prior to 245C 5C Solder pot dip, 95% Coverage. Resistance to Solder Heat: Per MIL-STD-202, Method 210, Condition C. Wave: Topside board -mount product, 260C 5C for 20 Seconds. MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G's peak, 10Hz to 500Hz, 15mi nute cycles 12 times each perpendicular axis. Shock: Per MIL-STD-202, Method 213, Condition D. 500G's, 1ms, half sine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65C, 10 cycles 10C to 65C. Wave Solder Profile TOP VIEW Temperature 260C 260C I( W 0624 220C 180C 150C OFC5EF3ABG 32 MHz 120C 0 120 S Max. Package Outline Time 10 S 60 S Max. 360 Sec. Max. Pin Connections Pin 1 2 3 4 5 Connection Output Ground, Case N/C N/C Vcc Test Circuit Dimensional Tolerance: .005 (.127mm) Specifications subject to change without notice. DATA SHEET #: Cx097 PAGE 2 OF 2 REV: 00 DATE: 05/17/06 aCopyright 2001 Connor-Winfield all rights reserved.