PolySwitch(R) PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 www.circuitprotection.com PRODUCT: VTP175SF Overcurrent Protection Device Raychem Circuit Protection Products DOCUMENT: SCD 26780 PCN: RF0787 REV LETTER: B REV DATE: JUNE 27, 2007 PAGE NO.: 1 OF 1 Specification Status: Released Electrical Rating Voltage: 16V MAX Current: 100A MAX Chip Size: 3.6 x 10mm Lead: Nickel 1/4H 0.125mm nominal thickness Solder: Lead-free Tape: Polyester 11mm nominal width Marking: (Color: Green) Manufacturer's Mark V1X *Dimension values on the drawing are for reference only. Part Identification Lot Identification TABLE I. DIMENSIONS: mm: A B MIN MAX MIN MAX 17.3 19.3 3.5 3.9 (0.68) (0.76) (0.14) (0.15) *Rounded off approximation C MIN --- D MAX 0.8 (0.03) MIN 2.2 (0.09) E MAX 3.8 (0.15) MIN 3.5 (0.14) F MAX 5.1 (0.20) MIN 2.9 (0.11) MAX 3.1 (0.12) TABLE II. PERFORMANCE RATINGS: As measured in Mueller Kelvin Clips model BU-75K I HOLD AMPS 25C HOLD 1.75 CURRENT TRIP LIMITS TIME TO TRIP REFERENCE RESISTANCE AMPS AMPS AMPS AMPS SECONDS AT OHMS AT 0C AT 25C AT 60C AT C 25C, 8.75 A AT 25C HOLD TRIP HOLD TRIP HOLD TRIP HOLD TRIP TYP MAX MIN MAX 2.2 4.7 1.75 3.6 0.8 1.9 ---5 0.029 0.051 Reference Documents: Precedence: Effectivity: CAUTION: OHMS AT 25C MIN MAX 0.029 0.102 TRIPPEDSTATE POWER DISSIPATION WATTS AT 25C, 16V TYP MAX -1.4 UL, CSA, TUV This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation or bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information: ROHS Compliant ONE-HOUR POST-TRIP RESISTANCE ELV Compliant (c) 2006, 2007 Tyco Electronics Corporation. All rights reserved Pb-Free