RL103F - GOOD-ARK Electronics

Notes:

(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A

(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts

(3) Pulse test: pulse width 300uSec, Duty cycle 2%

Symbols RL101F RL102F RL103F RL104F RL105F RL106F RL107F Units

Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts

Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts

Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts

Average forward current

at TA=55 I(AV) 1.0 Amp

Peak forward surge current

8.3mS single half sine-wave IFSM 30.0 Amps

Maximum instantaneous forward voltage

at IFM=1.0A; TJ=25 (Note 3) VF1.30 Volts

Maximum DC reverse current TJ=25

at rated DC blocking voltage TJ=100 IR

5.0

100.0 A

Maximum reverse recovery time (Note 1) Trr 150 250 500 nS

Typical junction capacitance (Note 2) CJ15.0 F

Maximum thermal resistance R JL 50 /W

Operating and storage temperature range TJ, TSTG -65 to +175

Features

RL101F THRU RL107F

FAST SWITCHING PLASITC RECTIFIER

Reverse Voltage - 50 to 1000 Volts

Forward Current - 1.0 Ampere

Maximum Ratings and Electrical Characteristics @25 unless otherwise specified

Maximum Ratings

DIMENSIONS

DIM

inches mm

Note

Min. Max. Min. Max.

A 0.165 0.205 4.2 5.2

B 0.079 0.106 2.0 2.7

C 0.020 0.024 0.5 0.6

D 1.000 - 25.40 -

Plastic package has Underwriters Laboratory

Flammability Classification 94V-0

Fast switching for high efficiency

Construction utilizes void-free molded plastic technique

1.0 ampere operation at TA=55 with no thermal

runaway

High temperature soldering guaranteed:

250 /10 seconds, 0.375(9.5mm) lead length,

5 lbs. (2.3kg) tension

Case: A-405 molded plastic body

Terminals: Plated axial leads, solderable per

MIL-STD-750, method 2026

Polarity: Color band denotes cathode end

Mounting Position: Any

Weight: 0.008 ounce, 0.23 gram