〈Transistor〉
ＲＴ１Ｎ２５０ＸSERIES
TransistorWithResistor
ForSwitchingApplication
SiliconNPNEpitaxialType
DESCRIPTION OUTLINEDRAWING       UNIT：mm
RT1N250U RT1N250C
RT1N250Xis a onechiptransistor
withbuilt-inbiasresistor,PNPtypeisRT1P250X.
FEATURE
・Built-inbiasresistor(R1=200kΩ).
APPLICATION
Invertedcircuit,switchingcircuit,interfacecircuit,
drivercircuit.
Equivalentcircuit
         JEITA：−
JEDEC：−      JEITA：SC-59
JEDEC：SimilartoTO-236
TerminalConnector
①：Base
②：Emitter
③：Collector
TerminalConnector
①：Base
②：Emitter
③：Collector
RT1N250M RT1N250S
JEITA：SC-70
JEDEC：− JEITA：−
JEDEC：−
TerminalConnector
①：Base
②：Emitter
③：Collector
TerminalConnector
①：Emitter
②：Collector
③：Base
0.15
0〜0.1
0.55
0.7
0.3
0.40.80.4 1.6
0.5
0.51.0
1.6
①
②③
0.16
0〜0.1
0.8
1.1
0.4
0.51.50.5 2.5
0.95
0.95
1.90
2.9
①
②③
0.15
0〜0.1
0.7
0.9
0.3
1.25
0.425 2.1
0.650.65
1.3
2.0
①
②③
0.425
4.0
1.0
1.0
14.0 3.0
1.27 1.27
0.45
0.1
2.5
0.4
① ② ③
C
(OUT)
E
(GND)
B
(IN)
R1
ISAHAYA
 
ELECTRONICS
 
CORPORATION
〈Transistor〉
ＲＴ１Ｎ２５０ＸSERIES
TransistorWithResistor
ForSwitchingApplication
SiliconNPNEpitaxialType
MAXIMUMRATING(Ta=25℃)
RATING
SYMBOL PARAMETER RT1N250U RT1N250M RT1N250C RT1N250S UNIT
Ｖ
ＣＢＯ CollectortoBasevoltage 50 V
Ｖ
ＥＢＯ EmittertoBasevoltage 6V
Ｖ
ＣＥＯ CollectortoEmittervoltage 50 V
Ｉ
 Ｃ Collectorcurrent 100 mA
Ｉ
 ＣＭ PeakCollectorcurrent 200 mA
Ｐ
ＣCollectordissipation(Ta=25℃)150200 450 mW
Ｔｊ Junctiontemperature +150 +150 ℃
Ｔｓｔｇ Storagetemperature -55〜+150 -55〜+150 ℃
ELECTRICALCHARACTERISTICS(Ta=25℃)
LIMIT
SYMBOL PARAMETER TESTCONDITION MIN TYP MAX UNIT
Ｖ
（ＢＲ）ＣＥＯ
CtoEbreakdownvoltage I C=100μA，RBE=∞50 V
Ｉ
 ＣＢＯ Collectorcutoffcurrent VCB=50V，I E=0 0.1 μA
ｈ
ＦＥ DCforwardcurrentgain VCE=5V，I C=1mA 100 −
Ｖ
ＣＥ（ｓａｔ） CtoEsaturationvoltage I C=0.5mA，I B=0.05mA 0.3 V
Ｒ
１Inputresistance 200 kΩ
ｆ
ＴGainbandwidthproduct VCE=6V，I E=-10mA 200 MHz
ISAHAYA
 
ELECTRONICS
 
CORPORATION
Marketing division, Marketing planning department
6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
Keep safety first in your circuit designs!
·ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but
there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or
property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures
such as (1) placement of substitutive, auxiliary, (2) use of non-farmable material or (3) prevention against any malfunct
ion or
mishap.
Notes regarding these materials
·These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to
the
customer’s application; they don't convey any license under any intellectual property rights, or any other rights, belonging
ISAHAYA or third party.
·ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights
,
originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials.
·All information contained in these materials, including product data, diagrams and charts, represent information on products
at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation
without notice
due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics
Corporation or an authorized ISAHAYA products distr ibutor for the latest product information
before purchasing product listed
herein.
·
ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used
under circumstances in which human lif
e is potentially at stake. Please contact ISAHAYA electronics corporation or an
authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes
,
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
·
The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these
materials.
·If these products or technolo
gies are subject to the Japanese export control restrictions, they must be exported under a
license from the Japanese government and cannot be imported into a country other than the approved destination. Any
diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
·Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products
distributor for further details on these
materials or the products contained therein.
Jan.2003