Feed-Through Altech "U" Series Universal Rail Mounting Standard Screw Clamp Feed through terminals are the most versatile terminals for wire-to-wire connection in control, automation, instrumentation and power distribution applications. A special design feature on the flexible foot enables easy mounting and dismounting from the DIN Rail with the help of a screwdriver. The terminals with AEx eII Ex eII can be used in a potentially explosive atmosphere which may occur in chemical and petrochemical industry. These terminals can be used in Class 1, Zone 0, 1 & 2 hazardous locations. These terminal blocks comply to En 500019. CTS2.5U-N Terminal Width 5 mm 6 mm Height x Length 45 x 43 mm 45 x 43 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross connect. 2screwclamps&1tappedholeforcrossconnect. Approvals E220514 Wire Range 0.5-2.5 sq.mm 22-14 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 600V 800V 600V 600 V 800 V 600 V Current Rating 25 A 24 A 20 A 35/40 A* 32 A 35/40A* Torque 7 lb-in 0.4 Nm 7 lb-in 7 lb-in 0.5 Nm AEx eII Ex eII Cat. No. (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Cat. No. Std. Pk. CTS2.5U-N 50 CTS4U-N 50 End Plate EP2.5/4UN 50 EP2.5/4UN 50 Isolation Partition PP2.5/4UN 50 PP2.5/4UN 50 Separator Plate SP2.5/4UN 100 SP2.5/4UN 100 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA721/2 CA721/3 CA721/4 CA721/10 CA721/100 100 50 50 10 10 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA741/2 CA741/3 CA741/4 CA741/10 CA741/100 100 50 50 10 10 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 50 50 10 10 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole CA703/01 CA704/01 CA705/01 CA731/10 -- CA731/100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA 707/S/Q/01 100 CA707/S/Q/01 100 CA717/2 CA717/3 CA717/4 CA717/10 100 100 100 25 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 MT5 MT6F 100 10 MT6 MT6F 100 10 Shorting Sleeve & Screw External Jumper 8 Std. Pk. 7 lb-in AEx eII Ex eII Terminal Block Current Bars * 35A with one No. 10 AWG and 40A with two No. 12 AWG wires. E220514 22-12 AWG Other Approvals COLOR BLOCKS CTS4U-N Marking Tags 2 pole 3 pole 4 pole 10 pole Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Feed-Through CTS6U CTS10U CTS16U CTS25U 8 mm 10 mm 12 mm 12 mm 47 x 43 mm 47 x 43 mm 47 x 43 mm 56 x 49 mm 12 mm 12 mm 16 mm 18 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 screw clamps & 1 tapped hole for cross connect. 2 screw clamps & 1 tapped hole for cross connect. 2 screw clamps & 1 tapped hole for cross connect. 2 screw clamps & 1 tapped hole for cross connect. E220514 E220514 E220514 E220514 22-8 AWG 1.5-6 sq.mm 22-8 AWG 22-6 AWG 1.5-10 sq.mm 16-6 AWG 22-6 AWG 2.5-16 sq.mm 20-4 AWG 12-2 AWG 6-25 sq.mm 14-2 AWG 600 V 750 V 600 V 600 V 750 V 600 V 600 V 800 V 600 V 600 V 800 V 600 V 50 A 41 A 50 A 65 A 57 A 65 A 70 A 76 A 85 A 115 A 101 A 115 A 9 lb-in 0.8 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 25 lb-in 2.0 Nm 14 lb-in 14 lb-in 1.2 Nm AEx eII Ex eII AEx eII Ex eII Cat. No. Std. Pk. 25 lb-in AEx eII Ex eII Cat. No. Std. Pk. Cat. No. CTS6U 50 CTS10U 50 EP6/10U 50 EP6/10U 50 EP25U PP6/10U 50 PP6/10U 50 PP25UN 50 SP6/10U 100 SP6/10U 100 SP6/10U 100 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA723/2 CA723/3 CA723/4 CA723/10 100 50 50 10 CA724/2 CA724/3 CA724/4 CA724/10 100 50 50 10 CA751/2 CA751/3 CA751/4 CA751/10 50 50 50 10 CA725/2 CA725/3 CA725/4 CA725/10 50 25 25 10 CA743/2 CA743/3 CA743/4 CA743/10 100 50 50 10 CA744/2 CA744/3 CA744/4 CA744/10 100 50 50 10 CA761/2 CA761/3 CA761/4 CA761/10 50 50 50 10 CA745/2 CA745/3 CA745/4 CA745/10 50 25 25 10 CA703/2 CA704/2 CA705/2 CA733/10 100 100 100 100 CA703/3 CA704/3 CA705/3 CA734/10 100 100 100 100 CA703/8 CA704/8 CA705/8 CA739/10 100 100 100 100 CA703/4 CA704/4 CA705/4 CA735/10 100 100 100 100 CA707/S/Q/1 100 CA707/S/Q/1 100 CA707/S/Q/5 100 CA707/S/Q/2 100 CA710/2 CA710/3 CA710/4 CA710/10 100 100 100 25 CA718/2 CA718/3 CA718/4 CA718/10 100 50 50 25 MT8 MT6F 100 10 MT10 MT6F 100 10 MT12 MT6F 100 10 MT12 MT6F 100 10 CTS16U Std. Pk. 50 Cat. No. CTS25U Std. Pk. 50 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 9 Feed-Through CTS35U CTS35UN CTS50U CTS95U Terminal Width 15 mm 16 mm 20.5 mm 25 mm Height x Length 58 x 52.5 mm 58 x 52.5 mm 75.5 x 71 mm 90 x 83 mm Stripping Length 18 mm 18 mm 22 mm 24 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross 2 screw clamps & 1 tapped hole for cross 2 screw clamp connections 2 screw clamp connections Approvals E220514 Wire Range 8-2 AWG 10-35 sq.mm 8-2 AWG E220514 2-12 AWG 4-35 sq.mm 2-12 AWG E220514 E220514 6-2/0 AWG 16-50 sq.mm 6-2/0 AWG 2-4/0 AWG 25-95 sq.mm 2-4/0 AWG Voltage Rating 600 V 750 V 600 V 600 V 750 V 600 V 600V 1000 V 600 V 600V 1000 V 600 V Current Rating 145 A 125 A 145 A 130 A 125 A 130 A 150 A 150 A 150 A 230 A 232 A 230 A 25 lb-in 2.5 Nm 25 lb-in 25 lb-in 2.5 Nm 25 lb-in 60 lb-in 6.8 Nm 60 lb-in 160 lb-in 18.2 Nm 160 lb-in Cat. No. Std. Pk. Torque AEx eII Ex eII Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CTS35U 50 CTS35UN 50 Isolation Partition PP35U 50 PP35UN 50 CA702 CA802 50 50 CA702 CA802 50 50 Cat. No. Std. Pk. CTS50U 10 CTS95U 10 CA202 CA102 50 50 CA202 CA102 50 50 MT20 MT6F 100 10 MT25 MT6F 100 10 DIN Rail for ordering information refer to page 70 End Stop for ordering info. refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA726/2 CA726/3 CA726/4 CA726/10 50 25 25 10 CA771/2 CA771/3 CA771/4 CA771/10 50 25 25 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA746/2 CA746/3 CA746/4 CA746/10 50 25 25 10 CA781/2 CA781/3 CA781/4 CA781/10 50 25 25 10 Current Bars CA703/5 CA704/5 CA705/5 CA736/10 100 100 100 100 CA703/10 CA704/10 CA705/10 CA770/10 100 100 100 100 Shorting Sleeve & Screw CA707/S/Q/2 100 CA707/S/Q/2 100 MT15 MT6F MT16 MT6F 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole 2 pole 3 pole 4 pole 10 pole External Jumper Marking Tags 10 100 10 100 10 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Feed-Through Multi-Connection CMC2-2 CMC1-2 Connect multiple wires to a single terminal block and eliminate reliability problems encountered when connecting two wires into a single clamp. Two versions are available. Type CMC1-2 features a single screw-cage clamp for 22-10 AWG wires on one side and two clamps on the other side for 22-10 AWG wires. Type CMC2-2 has two identical clamps for 22-10 AWG wires on both sides. Terminal Width 6 mm 6 mm Height x Length 47 x 46.5 mm 51.5 x 65 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 3screwclamps&1tappedholeforcrossconnection 4screwclamps&2tappedholesforcrossconnection Approvals E220514 E220514 22-10AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 600 V 650 V 600 V 600 V 650 V 600 V Current Rating 35 A 32 A 35 A 35 A 32 A 35 A 7 lb-in. 0.5 Nm 7 lb-in. 7 lb-in. 0.5 Nm 7 lb-in. Wire Range Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CMC1-2 100 CMC2-2 50 End Plate EPCMC1-2 50 EPCMC2-2 50 CA702 CA802 50 50 CA702 CA802 50 50 Separator Plate DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 COLOR BLOCKS (other than grey standard) Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 50 50 10 5 CA742/2 CA742/3 CA742/4 CA742/10 CA742/100 100 50 50 10 5 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA707/S/Q/01 100 CA707/S/Q/01 100 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 MT6 100 MT6 100 When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 11 Feed-Through Double Level * Double wiring density available without extension of mounting rails. * Interconnection/shorting can be done at both levels. * Marking/identification by marking tags possible at both levels. CDL4U(I.S) internally shorted double level terminals are useful for distribution applications by using shorting links at lower levels. CDL4U(I.S) CDL4U Altech double level terminals are the answer to high wiring density problems posed by certain unavoidable wiring arrangements. Double level terminals have the following advantages: Terminal Width 6 mm 6 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 4 screw clamps & 2 tapped holes for cross connection 4 screw clamps & 1 tapped hole for cross connection Approvals E220514 Wire Range E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 300V 400 V 600 V 300 V 400 V 600 V Current Rating 35 A 32 A 35 A 35 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDL4U 100 CDL4U(I.S) 100 End Plate EPCDL4U 50 EPCDL4U 50 Separator Plate SPCDL4U 100 SPCDL4U 100 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 CA727/2 CA727/3 CA727/4 CA727/10 100 50 50 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT2 100 MT2 100 Current Bars Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 12 Ordering Suffix R BU BL O G Y W BG DB 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Feed-Through Offset Double Level ODL4U Altech Offset Double Level Terminals, which provide a separate connection at two levels. In ODL, the top level is offset from the bottom level by half the thickness of the terminal. This offset provides better accessibility to the screws on the lower level. *It is recommended to use end plates at both ends of assembled ODL terminal sets for flat alignment to enable effective use of end stops. Terminal Width 6 mm Height x Length 63 x 68 mm Stripping Length 9 mm Insulation Material Polyamide 6.6 Type of Connection 4screwclamps&2tappedholesforcrossconnection Approvals E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 600 V 630 V 600 V Current Rating 35 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in Wire Range Torque Other Approvals Cat. No. Terminal Block End Plate Front Back Std. Pk. ODL4U 50 EPODL4U EP1ODL4U 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 10 10 10 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 50 25 MT6 100 COLOR BLOCKS (other than grey standard) Current Bars When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 13 Feed-Through Triple Level CTL2.5U CTL2.5U-H For applications with extreme space constraints. Only 6mm (.236") wide, with three separate feed-through levels. Jumpers can be used to reduce field wiring. They can also be used in control systems where sensors and actuator applications are involved. The top level of CTL2.5UH terminal block provide connecting points for signal while middle and bottom level provide connecting points are used for positive and negative potential. Terminal Width 6 mm 6 mm Height x Length 67 x 61 mm 67 x 84 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 4 Screw clamps & 3 tapped holes for cross connect. 6 Screw clamps & 3 tapped holes for cross connect. LED Voltage Approvals In applications where switching indication is required, choice of CTL2.5UHL and CTL2.5UL terminal blocks with built-in electronic components are available. E220514 22-12 AWG 0.5-2.5 sq.mm 22-12 AWG Wire Range E220514 22-12 AWG 0.5-2.5 sq.mm 22-12 AWG Voltage Rating 300 V 500 V 300 V 300 V 500 V 300 V Current Rating 25 A 24 A 25 A 25 A 24 A 25 A 4.5 lb-in 0.4 Nm 4.5 lb-in 4.5 lb-in 0.4 Nm 4.5 lb-in Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CTL2.5U-H 50 CTL2.5U 50 End Plate EPCTL2.5U-H 50 EPCTL2.5U 50 CA202 CA702 CA802 50 50 50 CA202 CA702 CA802 50 50 50 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA707/S/Q/01 100 CA707/S/Q/01 100 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 MT2 100 MT2 100 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole 100 pole Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Shorting Sleeve & Screw Color Red Blue Black Orange Green Yellow White Beige Dark Brown 14 Ordering Suffix R BU BL O G Y W BG DB External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Double & Triple with Ground Terminal Blocks CTLG2.5 CDLG2.5 The CDLG2.5 is a double level and the CTLG2.5 is a triple level terminal block with an additional connection point for earthing (Grounding) cables. This separate connection point is appropriately identified by the green-yellow imprint on its top. Terminal Width 6 mm 6 mm Height x Length 50 x 71 mm 62 x 87.5 mm Stripping Length 9 mm 9 mm The triple level terminal block is an ideal choice for motor, sensor, actuator and initiator connections. Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 5 Screw clamps & 2 tapped holes for cross connect. 7 Screw clamps & 1 tapped holes for cross connect. LED Voltage Approvals E220514 E220514 24-12 AWG 24-12 AWG Voltage Rating 300 V 300 V Current Rating 24 A 24 A 7 lb-in 7 lb-in Wire Range Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDLG2.5 50 CTLG2.5 50 End Plate EPCDLG2.5 50 EPCTLG2.5 50 CA202 CA702 CA802 50 50 50 CA202 CA702 CA802 50 50 50 CA627/2 CA627/3 CA627/4 CA627/10 100 50 50 10 CA627/2 CA627/3 CA627/4 CA627/10 100 50 50 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA611/S/Q 100 CA611/S/Q 100 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 MT2 100 MT2 100 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 COLOR BLOCKS (other than grey standard) Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Shorting Sleeve & Screw External Jumper Marking Tags 2 pole 3 pole 4 pole 10 pole Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Feed-Through Triple Level CTL2.5U-H(L)* CTL2.5U(L)* 6 mm 6 mm 67 x 61 mm 67 x 84 mm 9 mm 9 mm Polyamide 6.6 Polyamide 6.6 4 Screw clamps & 2 tapped holes for cross connect. 6 Screw clamps & 2 tapped holes for cross connect. 12V, 24V, 48V, 110V DC 12V, 24V, 48V, 110V DC E220514 22-12 AWG 0.5-2.5 sq.mm 22-12 AWG 300 V 500 V 300 V 25 A 24 A 4.5 lb-in 0.4 Nm Cat. No. E220514 0.5-2.5 sq.mm 22-12 AWG 300 V 500 V 300 V 25 A 25 A 24 A 25 A 4.5 lb-in 4.5 lb-in 0.4 Nm 4.5 lb-in Std. Pk. 22-12 AWG Cat. No. Std. Pk. CTL2.5U-H(L)* 50 CTL2.5U(L)* 50 EPCTL2.5U-H 50 EPCTL2.5U 50 CA202 CA702 CA802 50 50 50 CA202 CA702 CA802 50 50 50 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA722/2 CA722/3 CA722/4 CA722/10 CA722/100 100 50 50 10 5 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA707/S/Q/01 100 CA707/S/Q/01 100 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 CA715/2 CA715/3 CA715/4 CA715/10 100 100 100 50 MT2 100 MT2 100 Ideal for sensor applications. See Altech's Inductive Proximity Sensor catalog for ordering information. * Add required voltage to part number as suffix; i.e. CTL2.5U(L)/24 for 24V DC Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 15 Ground Blocks Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. CGT4U CGT4N Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail.The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail. Ground blocks can also be used as end stops, preventing other terminal blocks and components from moving laterally on the DIN Rail. Terminal Width 6 mm 6 mm Height x Length 48 x 43 mm 45.4 x 54.2 mm They are supplied with a standard green/yellow housing for easy identification and accept standard marking tags. Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 CGT4U, CGT10U and CGT35U can be mounted on both DIN 32mm and DIN 35mm rails. Type of Connection 2 screw clamps 2 screw clamps CGT4N, CGT6N and CGT16N can be mounted on 35mm DIN rail and have the same top outer profile as the feed through blocks (CTS4U-N, CTS2.5U-N, CTS6U, CTS10U and CTS16U). Wire Range * High density * Screw-cage clamp * Special clamping foot * Polyamide 6.6 * Color: green/yellow Approvals Torque E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 7 lb-in 0.5 Nm 7 lb-in Other Approvals Terminal Block E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 7 lb-in 0.8 Nm 7 lb-in AEx eII Ex eII Cat. No. Std. Pk. Cat. No. Std. Pk. CGT4U 50 CGT4N 50 EPCGT4U 100 MT6 100 MT6 100 DIN Rail for ordering information refer to page 70 End Plate Marking Tags (MT Type) Assembly for single phase 3 wire circuits. 16 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Ground Blocks CGT6N CGT10U CGT10N CGT16N CGT35U 8 mm 10 mm 10 mm 12 mm 16 mm 47 x 54.5 mm 50 x 45 mm 50 x 45 mm 47 x 43 mm 61.5 x 58 mm 12 mm 12 mm 12 mm 16 mm 18 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 screw clamps 2 screw clamps 2 screw clamps 2 screw clamps 2 screw clamps E220514 UL E220514 E220514 E220514 22-8 AWG 1.5-6 sq.mm 22-8 AWG 22-6 AWG 1.5-10 sq.mm 16-8 AWG 22-6 AWG 1.5-10 sq.mm 16-8 AWG 20-4 AWG 2.5-16 sq.mm 20-4 AWG 8-2 AWG 10-35 sq.mm 8.2 AWG 14 lb-in 0.8 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm AEx eII Ex eII 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 25 lb-in 2.5 Nm 25 lb-in AEx eII Ex eII Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CGT6N 50 CGT10U 50 CGT10N 50 CGT16N 50 CGT35N 20 MT8 100 MT10 100 MT10 100 MT10 100 MT15 100 UL recognition in progress. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 17 Fuse Blocks, 5 x 20 and 5 x 25 mm CSFL4U However, an application of such terminals must take into considTerminal Width eration residual current flow. Fuse not included. DDFL4U - Double Level Fuse Terminal with fuse link on the top level has a separate feed through terminal at the lower level. This eliminates use of an additional feed through terminal. In DDFL4U(E), specially designed built in circuit gives light indication in the event of a fuse blow out at the top level. The terminal provides separate feed through connection possibility at the lower level. 8 mm Height x Length 43 x 58 mm 43 x 58 mm Stripping Length 9.5 mm 9.5 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 2 screw clamps 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC, 300V AC LED Voltage Type of Fuse Used COLOR BLOCKS When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB * Add required voltage to part number as a suffix. i.e. CSFL4U(L)/24 for 24V AC/DC. O5x20, O5x25 mm E220514 Wire Range Voltage Rating Isolation Partition (other than grey standard) O5x20, O5x25 mm Approvals Important: The disconnecting device is not suitable for interrupting load. The Terminal Block supply must be switched off before End Plate operating the slide link/lever. Fuses are sold separately Altech, see pages 23-24. Fuse not included. 8 mm DDFL4U(LR): This is a modified Current Rating version of DDFL4U(E) terminal where in two equipotential con- Torque nection points are available on Other Approvals both ends of the terminal. 18 CSFL4U(L)* Altech fuse terminals are also available with light indication CSFL4U(L). A specially designed built-in circuit gives light indication in the event of fuse blow out. Thus, fault in a circuit can be easily located. E220514 22-10 AWG 22-10 AWG 22-10 AWG 22-10 AWG 600 V 600 V 600 V 600 V 6.3 A 10 A 6.3 A 10 A 7 lb-in 7 lb-in 7 lb-in 7 lb-in Cat. No. Std. Pk. Cat. No. Std. CSFL4U 100 CSFL4U(L)* 50 EPCSFL4U 50 EPCSFL4U 50 PPCSFL4U 50 PPCSFL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 20 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 20 MT8 MT2 100 100 MT8 MT2 100 100 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper Insulated Internal Jumper Current Bar 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole 2 pole 3 pole 4 pole 10 pole Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Fuse Blocks, 5 x 20 and 5 x 25 mm CSFL6U DDFL4U Fuse not included. DDFL4U(E)* Fuse not included. DDFL4ULR Fuse not included. Fuse not included. 8 mm 8 mm 8 mm 8 mm 60 x 43 mm 66 x 88 mm 66 x 88 mm 66 x 88 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 screw clamps 4 screw clamps 4 screw clamps 4 screw clamps 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC O5x20, O5x25 mm O5x20, O5x25 mm O5x20, O5x25 mm E220514 E220514 O5x20, O5x25 mm E220514 E220514 22-8 AWG 1.5-6 sq.mm 22-8 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 300 V 500 V 300 V 600 V 500 V 600 V 600 V 500 V 600 V 600 V 500 V 600 V 10 A 6.3 A 10 A 6.3 A 35 A 6.3 A 32 A 6.3 A 35 A 6.3 A 35 A 6.3 A 32 A 6.3 A 35 A 6.3 A 6.3 A 6.3 A 14 lb-in 0.8 Nm 14 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. 22-10 AWG 0.5-4 sq.mm Cat. No. 22-10 AWG Std. Pk. CSFL6U 50 DDFL4U 20 DDFL4U(E)* 20 DDFL4ULR 20 EPCSFL6U 50 EPDDFL4U 20 EPDDFL4U 20 EPDDFL4U 20 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 CA202 50 50 50 CA710/2 CA710/3 CA710/4 CA710/10 100 100 100 25 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA730/2 CA730/3 CA730/4 CA730/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA740/2 CA740/3 CA740/4 CA740/10 100 50 50 10 CA703/6 CA704/6 CA705/6 CA737/10 100 100 100 100 CA703/6 CA704/6 CA705/6 CA737/10 100 100 100 100 CA703/7 CA704/7 CA705/7 CA738/10 100 100 100 100 CA707/S/Q/3 100 CA707/S/Q/3 100 CA707/S/Q/8 100 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 MT8 MT2 100 100 MT8 MT2 100 100 MT8 MT2 100 100 MT8 MT6 100 100 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 19 Fuse Blocks, 5 x 20 and 5 x 25 mm DDFL4U(LR): This is a modified version of DDFL4U(E) terminal where in two equipotential connection points are available on both ends of the terminal. DDFL4U(E)LR* CAFL4U(L) is equipped with a LED for blown fuse indication. CAFL4U(N) is equipped with a neon bulb for same application. Important: The disconnecting device is not suitable for interrupting load. The supply must be switched off before operating the slide link/lever. Fuses are sold separately Altech, see pages 23-24. * Add required voltage to part number as suffix, i.e. DDFL4U(E)/24 for 24V AC/DC Fuse not included. Terminal Width 8 mm Height x Length 66 x 88 mm Stripping Length 9.5 mm Insulation Material Polyamide 6.6 Type of Connection 4 screw clamps LED Voltage 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC Type of Fuse Used O5x20, O5x25 mm Approvals E220514 22-10 AWG 0.5-4 sq.mm Wire Range Voltage Rating Current Rating Top Level Bottom Level Torque 22-10 AWG 600 V 500 V 600 V 6.3 A 6.3 A 6.3 A 7 lb-in 0.5 Nm 7 lb-in Other Approvals Cat. No. Std. Pk. Terminal Block DDFL4U(E)LR* 20 End Plate EPDDFL4U 20 End Stop for ordering information refer to page 72 CA702 CA802 CA202 50 50 50 Internal Jumper 2 pole 3 pole 4 pole 10 pole CA730/2 CA730/3 CA730/4 CA730/10 100 50 50 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA740/2 CA740/3 CA740/4 CA740/10 100 50 50 10 Current Bar 2 pole 3 pole 4 pole 10 pole CA703/7 CA704/7 CA705/7 CA738/10 100 100 100 100 Shorting Sleeve & Screw CA707/S/Q/8 100 External Jumper CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 MT8 MT2 100 100 DIN Rail for ordering information refer to page 70 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) 20 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Fuse Blocks, 1/4 x 1 and 1/4 x 11/4 in. CAFL4U(L)* CAFL4U Fuse not included. CAFL4U(N) Fuse not included. Fuse not included. Terminal Width 9 mm 9 mm 9 mm Height x Length 50 x 72 mm 50 x 72 mm 50 x 72 mm Stripping Length 9.5 mm 9.5 mm 9.5 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps 24VAC/DC, 48VAC/DC, 110VAC/DC, 220VAC, 300VAC 110-220VAC/DC, 300VAC O1/4x1 in., O1/4x11/4 in. O1/4x1 in., O1/4x11/4 in. LED Voltage O1/4x1 in., O1/4x11/4 in. Type of Fuse Used Approvals E220514 E220514 Wire Range 22-10 AWG Voltage Rating Current Rating Top Level Bottom Level Torque 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 500 V 600 V 600 V 500 V 600 V 600 V 500 V 600 V 16 A 6.3 A 16 A 16 A 6.3 A 16 A 16 A 6.3 A 16 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CAFL4U 25 CAFL4U(L)* 25 CAFL4U(N) 25 End Plate EPCAFL4U 50 EPCAFL4U 50 EPCAFL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA716/2 CA716/3 CA716/4 CA716/10 50 50 50 25 CA716/2 CA716/3 CA716/4 CA716/10 100 50 50 20 CA716/2 CA716/3 CA716/4 CA716/10 100 50 50 20 MT9 100 MT9 100 MT9 100 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bar 2 pole 3 pole 4 pole 10 pole Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 21 Fuse Blocks, 10 x 38 mm 1 POLE 2 POLE 3 POLE 17.5 mm 35 mm 52.5 mm Height x Length 77 x 63.5 mm 77 x 63.5 mm 77 x 63.5 mm Stripping Length 11 mm 11 mm 11 mm Insulation Material Aculon (R) Aculon (R) Aculon (R) Type of Connection 2 screw clamps 2 screw clamps 2 screw clamps O10 x 38 mm O10 x 38 mm O10 x 38 mm The main characteristics of fuse disconnectors are: * Compliance with IEC 60947-1, IEC 60947-3 * UL508 recognized * Plastic parts are made of material resistant to high temperatures * All contact surfaces are silver plated * Mounting on standard DIN 35 mm rail (DIN EN60715). * Available up to 4 pole * For all sizes a version with electronic indicator is available. There are two technical types of indicator: Terminal Width (B) Fusion Voltage L (LED) with built in LED diode which blinks after the fuse-link operates. The internal circuit resistance is 2M, thus the total dissipation is minimal. The indicator is capable of operating in conditions of open circuit with minimum capacitance between connection cables. Operating voltage range spans from 50V to 690V AC and DC. I (NEON) with neon lamp, which is constantly lit after the fuse-link operates. The internal circuit resistance is 570k, thus it is necessary that the circuit be closed in order for the indicator to function. The operational voltage range is 100 V to 750 V AC. * Fuses are sold separately Altech, see pages 23-24. Type of Fuse Used Approvals E212627 Wire Range E212627 E212627 24-4 AWG 1.5-25sq.mm 24-4 AWG 24-4 AWG 1.5-25sq.mm 24-4 AWG 24-4 AWG 1.5-25sq.mm 24-4 AWG Voltage Rating 690 V 400 V** 690 V 690 V 400 V** 690 V 690 V 400 V** 690 V Current Rating 32A 32A** 32A 32A 32A** 32A 32A 32A** 32A Torque 31 lb-in 2-2.5 Nm 31 lb-in Cat. No. Std. Pk. 31 lb-in 2-2.5 Nm 31 lb-in Cat. No. Std. Pk. 31 lb-in 2-2.5 Nm 31 lb-in Cat. No. Std. Pk. Terminal Block Indicator: None LED Neon CB1038-1 CB1038-1/L CB1038-1/I 1 1 1 CB1038-2 CB1038-1/L CB1038-2/I 1 1 1 CB1038-3 CB1038-3/L CB1038-3/I 1 1 1 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 79 mm (3.11 in.) 64.5 mm (2.54 in.) 47.5 mm (1.87 in.) 4 mm (0.16 in.) B 81 mm (3.19 in.) 37 mm (1.46 in.) 22 Dimension for B: 1 Pole 1 Pole + Neutral 2 Pole 3 Pole 3 Pole + Neutral 17.5mm 35mm 35mm 52.5mm 70mm Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Fuses gL/gG - Line Protection Cylinder Fuses are typically used in industrial applications to protect electrical devices such as motors, drives, etc. Standard: IEC 20269-4-1 and IEC60269-1 Rated Voltage: 500V Rated Current/ Rated Voltate They are available in four sizes with a current range from 1 to 125 Amps. Cylinder Fuses have metal caps at both ends, and a porcelain fuse body. OPERATING CLASSES gL/gG - Line Protection Slow, typically used for distribution circuits or resistive loads. Typical Markings: gL/gG aM - Motor Protection Fast acting short circuit protection, but slow acting overload protection. Typical Marking: aM 10x38 *400V aM - Motor Protection Rated Current/ Rated Voltate Standard: IEC 20269-4-1 and IEC60269-1 Rated Voltage: 500V aR - Semiconductor Protection Partial range, short circuit protection for devices such as diodes, SCRs. etc. Typical Markings: Ultra RapidTM, SitorTM, SilcuTM, ProtisterTM, RecticurTM, Ultra QuickTM, aR gR - Semiconductor Protection Full range, short circuit protection for devices such as diodes, SCRs. etc. Typical Markings: Ultra RapidTM, SitorTM, SilcuTM, ProtisterTM, RecticurTM, Ultra QuickTM, gR 0.5A 1A 2A 4A 6A 8A 10A 12A 16A 20A 25A 32A* 10x38 *400V 0.5A 1A 2A 4A 6A 8A 10A 12A 16A 20A 25A 32A* Cat. No. 2620017 2620000 2620001 2620003 2620005 2620006 2620007 2620008 2620009 2620011 2620013 2620015 Std. Pk. Cat. No. Std. Pk. 10 10 10 10 10 10 10 10 10 10 10 10 2621017 2621000 2621001 2621003 2621005 2621006 2621007 2621008 2621009 2621011 2621013 2621015 10 10 10 10 10 10 10 10 10 10 10 10 aR - Semiconductor Protection Standard: IEC 60269-4-1 Breaking Capacity: ~200 kA Rated Voltage: ~600V** In (A) Note: Other fuse sizes and fuse holders are available. Please refer to the Altech European Fuse catalog for more information. 10x38 6 8 10 12 16 20 25 32 Cat. No. 2625005 2625006 2625007 2625008 2625009 2625011 2625013 2625015 Operating I2-value (A's) 30 50 70 120 150 260 290 600 Power Dissipation Std. Pk. (W) ** 6-25A (700V DC/ breaking capacity -- --- 50kA) 1.5 2 2.5 3 3.5 4.8 6 7.5 10 10 10 10 10 10 10 10 32A (400V DC/ breaking capacity -- --- 50kA) gR - Semiconductor Protection Standard: IEC 60269-4-1 Breaking Capacity: ~200 kA Rated Voltage: ~690V O10.3 mm (0.4 in.) 10.5 mm (0.4 in.) In (A) 6 mm (0.24 in.) 38 mm (1.5 in.) 10.5 mm (0.4 in.) 6 mm (0.24 in.) Certified for 700V 10x38 1 2 4 6 8 10 12 16 20 25 30 Cat. No. 2645126 2645127 2645128 2645129 2645130 2645131 2645132 2645133 2645134 2645135 2645136 Operating I2-value (A's) 1.6 8 8 25 39 66 87 166 280 580 1.010 Power Dissipation Std. Pk. (W) 1 1.8 1.1 1.6 1.8 2.1 3.1 4.4 5.8 6.8 8.2 10 10 10 10 10 10 10 10 10 10 10 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 23 Miniature Fuses 5 X 20 Miniature Fuses are typically used to protect electronic devices, laboratory and measurement instruments, stereos, TV's, VCR's etc.They are available in four sizes with a current range of 20mA to 20 Amps. Miniature Fuses are manufactured according to VDE 0820 part 1, VDE 0820 part 2, IEC publication 127, CEE publication 4 and actual DIN standards. 5 X 25 6.3 X 32 (1/4" X 1-1/4") upon request upon request The 5x20, 5x25 fuses can be used in the CSFL4U series terminal blocks. The 6.3x32 fuse can be used in the CAFL4U series terminal blocks. Operating Class: Slow, Typical Marking: "T" Medium, Typical Marking: "M" Fast, Typical Marking: "F" Voltage 250V AC/DC DIN 41662 DIN 41571-2 IEC-127-2/III Current 1 Not standard rating. 2 Rated Voltage 150V. 3 Rated Voltage 60V. 4 UL recognized version available upon request. 20mA 32mA 40mA 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA Slow Fast 0.02M5x20M 0.032M5x20M Voltage 250V AC/DC DIN 41571-2 Voltage 250V AC/DC Cat. No. Medium Cat. No. Slow Fast 0.032M5x25M 0.04M5x25M 0.05M5x25M 0.063M5x25M 0.08M5x25M 0.1M5x25M 0.125M5x25M 0.16M5x25M 0.2M5x25M 0.25M5x25M 0.315M5x25M 0.032M6.3x32T 0.04M6.3x32T 0.05M6.3x32T4 0.063M6.3x32T4 0.08M6.3x32T4 0.1M6.3x32T4 0.125M6.3x32T4 0.16M6.3x32T4 0.2M6.3x32T4 0.25M6.3x32T4 0.315M6.3x32T4 0.05M6.3x32F 0.063M6.3x32F 0.08M6.3x32F 0.1M6.3x32F 0.125M6.3x32F 0.16M6.3x32F 0.2M6.3x32F 0.25M6.3x32F 0.315M6.3x32F 0.4M5x25M 0.5M5x25M 0.63M5x25M 0.8M5x25M 0.4M6.3x32T4 0.5M6.3x32T4 0.63M6.3x32T4 0.7M6.3x32T4 0.8M6.3x32T4 1.0M6.3x32T4 1.25M6.3x32T4 0.4M6.3x32F 0.5M6.3x32F 0.63M6.3x32F 0.7M6.3x32F 0.8M6.3x32F 1.0M6.3x32F4 1.25M6.3x32F4 1.6M6.3x32T4 2.0M6.3x32T4 2.5M6.3x32T4 1.6M6.3x32F4 2.0M6.3x32F4 2.5M6.3x32F2,4 3.15M6.3x32T4 4.0M6.3x32T4 5.0M6.3x32T4 6.3M6.3x32T4 7.0M6.3x32T4 8.0M6.3x32T4 10.0M6.3x32T4 12.5M6.3x32T4 16.0M6.3x32T4 20.0M6.3x32T4 3.15M6.3x32F2,4 4.0M6.3x32F2,4 5.0M6.3x32F3,4 6.3M6.3x32F3,4 7.0M6.3x32F3 8.0M6.3x32F3 10.0M6.3x32F3 12.5M6.3x32F3 16.0M6.3x32F3 20.0M6.3x32F3 0.05M5x20F4 0.08M5x20T4 0.1M5x20T4 0.125M5x20T4 0.16M5x20T4 0.2M5x20T4 0.25M5x20T4 0.315M5x20T4 0.05M5x20M 0.063M5x20M 0.08M5x20M 0.1M5x20M 0.125M5x20M 0.16M5x20M 0.2M5x20M 0.25M5x20M 0.315M5x20M 400mA 500mA 630mA 700mA 800mA 1.0A 1.25A 1.4A 1.6A 2.0A 2.5A 0.4M5x20T4 0.5M5x20T4 0.63M5x20T4 0.7M5x20T4 0.8M5x20T4 1.0M5x20T4 1.25M5x20T4 1.4M5x20T4 1.6M5x20T4 2.0M5x20T4 2.5M5x20T4 0.4M5x20M 0.5M5x20M 0.63M5x20M 0.7M5x20M 0.8M5x20M 1.0M5x20M 1.25M5x20M 1.4M5x20M 1.6M5x20M 2.0M5x20M 2.5M5x20M 0.4M5x20F4 0.5M5x20F4 0.63M5x20F4 0.7M5x20F4 0.8M5x20F4 1.0M5x20F4 1.25M5x20F4 1.6M5x20F4 2.0M5x20F4 2.5M5x20F4 2.0M5x25M 2.5M5x25M 3.15A 4.0A 5.0A 6.3A 7.0A 8.0A 10.0A 12.5A 16.0A 20.0A 3.15M5x20T4 4.0M5x20T4 5.0M5x20T4 6.3M5x20T4 3.15M5x20M 4.0M5x20M 5.0M5x20M 6.3M5x20M 3.15M5x20F4 4.0M5x20F4 5.0M5x20F4 6.3M5x20F4 3.15M5x25M 4.0M5x25M 5.0M5x25M 6.3M5x25M 8.0M5x20T1 10.0M5x20T1 12.5M5x20T1 16.0M5x20T1 20.0M5x20T1 8.0M5x20M 10.0M5x20M 12.5M5x20M1 16.0M5x20M1 20.0M5x20M1 8.0M5x20F1 10.0M5x20F1 12.5M5x20F1 16.0M5x20F1 20.0M5x20F1 8.0M5x25M1 10.0M5x25M1 16.0M5x25M1 0.05M5x20T4 Std. Pk. 10 24 Cat. No. Medium DIN 41661 IEC-127-2/II 0.1M5x20F4 0.125M5x20F4 0.16M5x20F4 0.2M5x20F4 0.25M5x20F4 0.315M5x20F4 1.0M5x25M 1.25M5x25M 1.6M5x25M Std. Pk. 10 Std. Pk. 10 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Altech's increasingly popular industrial enclosures keep you well covered with their high quality and attractive design. All at Very Competitive Prices! And many available for immediate delivery. Customization available! Rustproof * Polycarbonate/Polystyrene enclosures will last indefinitely without corrosion Visibility * Components and devices are fully visible through transparent covers, while completely protected and insulated Impact Resistant * Non-metallic enclosures withstand bumps and blows, they will not dent Maintenance Free * Surface finish does not deteriorate and requires no special painting or refinishing Chemical resistant * Resist weak and strong acids and alkali Lightweight * Non-metallic enclosures weigh significantly less than metal, simplifying handling Flexibility * Enclosures can be easily customized Illustrated are just a few of the applications for our enclosures. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 25 Disconnect CDTTU Disconnect and test terminals are an ideal choice for measuring control and regulatory circuits. The terminals provide a clear functional advantage for devices having utility instruments and associated transformers. CDTTU-SH Five versions of disconnect and test terminals are available: * CDTTU - disconnection is achieved by means of a slide link operated with a screw driver. * CDTTU-SH - disconnect and test terminals are ideal for use in current transformer applications when it is mandatory to keep the secondary side shorted at any point while taking current measurements. * CKT4U - disconnection is achieved by lifting the knife contact lever. * CSDL4U - hinged disconnection and testing terminal, incorporates a connecting link in place of the fuse link. * CSDL6U - hinged disconnect block for 8 AWG size wires. * DDDL4U - double level disconnect terminal with hinged disconnect in upper level. Specially designed socket head screws act as test/monitoring points in both CDTTU, CDTTU-SH and CKT4U. Important: The disconnecting device is not suitable for interrupting load. The supply must be switched off before operating the slide link/lever. Terminal Width 8 mm 16 mm Height x Length 57 x 63 mm 57 x 63 mm Stripping Length 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 4 screw clamps Approvals E220514 Wire Range 16-8 AWG 1.5-6 sq.mm 16-8 AWG 16-8 AWG 1.5-6 sq.mm 16-8 AWG Voltage Rating 600 V 800 V 600 V 300 V 300 V 300 V Current Rating 41 A 41 A 41 A 10 A 10 A 10 A 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDTTU 50 CDTTU-SH 50 End Plate EPCDTTU 50 EPCDTTU 50 CA702 CA802 50 50 CA702 CA802 50 50 CA710/2 CA710/3 CA710/4 CA710/10 100 100 100 25 CA710/2 CA710/3 CA710/4 CA710/10 100 100 100 25 MT8 100 MT8 100 Isolation Partition DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bar 2 pole 3 pole 4 pole 10 pole Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) 26 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Disconnect CKT4U CSDL4U CSDL6U DDDL4U 6 mm 8 mm 8 mm 8 mm 46 x 46.3 mm 43 x 58 mm 60 x 43 mm 66 x 88 mm 9 mm 9.5 mm 9.5 mm 9.5 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 2 screw clamps 2 screw clamps 2 screw clamps 4 screw clamps E220514 22-10 AWG 0.5-4 sq.mm E220514 E220514 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-8 AWG 1.5-6 sq.mm 22-8 AWG 22-10 AWG 22-10 AWG 600 V 800 V 600 V 600 V 500 V 600 V 300 V 500 V 300 V 300 V 300 V 16 A 16 A 16 A 14 A 6.3 A 14 A 10 A 6.3 A 10 A 14 / 35 A 14 / 35 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.8 Nm 7 lb-in 14 lb-in 0.8 Nm 14 lb-in 7 lb-in 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CKT4U 50 CSDL4U 100 CSDL6U 50 DDDL4U EPCKT4U 50 EPCSFL4U 50 EPCSFL6U 50 EPDDFL4U 20 PPCSFL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA729/2 CA729/3 CA729/4 CA729/10 100 50 50 10 CA749/2 CA749/3 CA749/4 CA749/10 100 50 50 10 CA703/6 CA704/6 CA705/6 CA737/10 100 100 100 100 CA707/S/Q/3 100 CA702 CA802 50 50 20 CA713/2 CA713/3 CA713/4 CA713/10 100 100 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 CA710/2 CA710/3 CA710/4 CA710/10 100 50 50 25 CA711/2 CA711/3 CA711/4 CA711/10 100 100 50 25 MT6 100 MT8 MT2 100 100 MT8 100 MT8 MT2 100 100 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 27 Distribution Block Altech CDB Compact Distribution Blocks are an ideal choice for a simplified distribution system. A lug/bolt secures the incoming cable and the screw clamp design of the block provides the outgoing connections. These provide easy connect points and ensure perfect continuity for distribution. A protective shield effectively shrouds the incoming connection. Application Information: Sum of outgoing currents on either side of center should not exceed half the maximum permissible incoming current. Sum of total outgoing currents should not exceed maximum permissible incoming current. Connection for higher outgoing currents should be done through the terminal nearest to the incoming connection. CDB4/x(1) CDB4/x Terminal Width 6 mm 6 mm Height & Width 45 x 43 mm 45 x 43 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 1 Lug/ M5 bolt connection for ring lug Screw clamp connection 1 Lug M5 /bolt connection for ring lug Screw clamp connection Type of Connection Input Output Approvals E220514 Input Output E220514 10-8 AWG 22-12 AWG 6-16 sq.mm 0.5-4 sq.mm 10-8 AWG 22-10 AWG 10-8 AWG 22-12 AWG 6-16 sq.mm 0.5-4 sq.mm 10-8 AWG 22-10 AWG Voltage Rating 600 V 800 V 600 V 600 V 800 V 600 V Input Current Rating Max. Individual Output 50 A 25 A 32 A 50 A 35 A 50 A 25 A 32 A 50 A 35 A 26 lb-in 7 lb-in 2.0 Nm 0.5 Nm 26 lb-in 7 lb-in 26 lb-in 7 lb-in 2.0 Nm 0.5 Nm 26 lb-in 7 lb-in Wire Range Input Output Torque Other Approvals Terminal Block Cat. No. H x W x L (mm) Outputs Std.Pk. Cat. No. CDB4/1 CDB4/2 CDB4/3 CDB4/4 CDB4/5 45 x 43 x 43.8 45 x 43 x 55.8 45 x 43 x 67.8 45 x 43 x 80 45 x 43 x 96 CDB4/2(1) 45 x 43 x 52 CDB4/3(1) 45 x 43 x 58 CDB4/4(1) 45 x 43 x 64 CDB4/5(1) 45 x 43 x 70 CDB4/6(1) 45 x 43 x 76 CDB4/10(1)45 x 43 x 100 CDB4/11(1) 45 x 43 x 106 4 8 12 16 20 10 10 10 5 5 H x W x L (mm) Outputs Std.Pk Cat. No. Std. Pk. End Stop for ordering information refer to page 72 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tags MT6 100 MT6 100 Cat. No. 4 6 8 10 12 20 22 Std. Pk. DIN Rail for ordering information refer to page 70 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. (MT Type) Warning Label Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 28 Ordering Suffix R BU BL O G Y W BG DB Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 10 10 5 5 5 5 5 Distribution Block CDB6/x CDB10/x CDB25/x 8 mm 10 mm 12 mm 43 x 47 mm 43 x 47 mm 56 x 49 mm 12 mm 12 mm 18 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 1 Lug/ M6 bolt connection for ring lug Screw clamp connection 1 Lug/ M8 bolt connection for ring lug Screw clamp connection 1 Lug/ M8 bolt connection for ring lug Screw clamp connection E220514 E220514 E220514 10-2 AWG 22-8 AWG 6-25 sq.mm 1.5-6 sq.mm 10-2 AWG 22-8 AWG 8-1/0 AWG 22-6 AWG 10-35 sq.mm 1.5-10 sq.mm 8-1/0 AWG 22-6 AWG 6-2/0 AWG 12-2 AWG 10-50 sq.mm 6-25 sq.mm 6-2/0 AWG 12-2 AWG 600 V 800 V 600 V 600 V 800 V 600 V 600 V 800 V 600 V 100 A 50 A 41 A 100 A 50 A 125 A 65 A 57 A 130 A 65 A 150 A 75 A 101 A 150 A 75 A 25 lb-in 9 lb-in 3.0 Nm 0.8 Nm 35 lb-in 14 lb-in 53 lb-in 14 lb-in 6.0 Nm 1.2 Nm 53 lb-in 14 lb-in 53 lb-in 14 lb-in 6.0 Nm 2 Nm 53 lb-in 14 lb-in Cat. No. H x W x L (mm) Outputs Std.Pk CDB6/2 43 x 47 x 64 CDB6/3 43 x 47 x 80 CDB6/4 43 x 47 x 96 8 12 16 10 10 5 Cat. No. H x W x L (mm) Outputs Std.Pk CDB10/2 43 x 47 x 72 CDB10/3 43 x 47 x 92 CDB10/4 43 x 47 x 112 8 12 16 10 10 5 Cat. No. H x W x L (mm) Outputs Std.Pk CDB25/2 CDB25/3 CDB25/4 56 x 49 x 88 8 56 x 49 x 112 12 56 x 49 x 136 16 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 MT8 100 MT10 100 MT12 100 SWL6 100 10 10 5 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 29 Distribution Block CMDB4/X CMDB blocks are the modified version of CDB terminal blocks without central incoming terminal connections. CMDB6/X CMDB10/X Terminal Width 6 mm 8 mm 10 mm Height & Width 45 x 43 mm 43 x 47 mm 43 x 47 mm Stripping Length 9 mm 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Screw clamp connection Screw clamp connection Screw clamp connection Type of Connection Input Output Approvals E220514 Input Output E220514 E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-8 AWG 1.5-6 sq.mm 22-8 AWG 22-6 AWG 1.5-10 sq.mm 20-6 AWG Voltage Rating 600 V 800 V 600 V 600 V 800 V 600 V 600 V 800 V 600 V Current Rating Input Max. Individual Output 30 A 32 A 35 A 50 A 41 A 50 A 65 A 57 A 65 A 7 lb-in 0.5 Nm 7 lb-in 9 lb-in 0.8 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in HxWxL (mm) Outputs Std. Pk. Wire Range Torque Input Output Other Approvals Cat. No. Cat. No. H x W x L Outputs Std. (mm) Pk. Cat. No. HxWxL (mm) Outputs Std. Pk. Terminal Block CMDB4/2 CMDB4/3 CMDB4/4 CMDB4/10 45 x 43 x 13.5 45 x 43 x 19.5 45 x 43 x 25.5 45 x 43 x 61.5 4 6 8 20 10 10 5 5 CMDB6/2 CMDB6/3 CMDB6/4 CMDB6/10 43 x 48 x 17.5 43 x 48 x 25.5 43 x 48 x 33.5 43 x 48 x 81.5 4 6 8 20 10 10 10 5 CMDB10/2 CMDB10/3 CMDB10/4 CMDB10/10 43 x 48 x 21.5 43 x 48 x 31.5 43 x 48 x 41.5 43 x 48 x 101.5 Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. End Stop for ordering information refer to page 72 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tags (MT Type) MT6 100 MT8 100 MT10 100 SWL6 100 4 6 8 20 DIN Rail for ordering information refer to page 70 Warning Label COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R 30 Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 10 10 10 5 We have a full line of standard and custom Interface Modules and Power Supplies. CONNECTOR TO TERMINAL BLOCK MODULES GENERAL PURPOSE/ INTERFACE RELAYS Compact and reliable connections between high density connectors and high quality screw-cage clamp terminal blocks; DIN Rail mountable A selection of DIN Rail mountable general purpose relays available for up to 12 A @ 250 Volts. DIODE MODULES & COMPONENT CARRIERS PLUGGABLE SLIMLINE RELAYS Add additional components to build circuits and diode modules mounted on 35 or 32mm DIN Rails. Need Text MONITORING PROTECTION MODULES I/O MODULE CARRIERS Special purpose components connected to screw-cage clamp terminal blocks; DIN Rail mountable. Accepts industry standard I/O modules. LED indicator and fuse protection included on carrier. RELAY MODULES SOLID STATE I/O MODULES Traditional relay modules from 1-16 channels. Available in several voltages (AC & DC), isolated or bussed systems. DIN Rail mounted. Input/Output Modules (both AC and DC) provided on a DIN mountable module. Bussed and isolated versions available. SAFETY RELAY MODULES POWER SUPPLIES Force-guided contact modules available in 1-16 channels, 12 and 24VDC coils and isolated or bussed systems. All mountable on 32 or 35mm DIN Rails. Basic and High Performance Series. DIN Rail mountable units are available with 12 or 24VDC output, 15 to 60 Watts and regulated outputs. CUSTOM MODULES MOUNTING TRACKS Altech provides quick turn-key custom designs and competitive solutions. DIN Rail or panel mount mounting tracks secure standard or custom printed circuit boards in control panels or cabinets. Contact Altech Today to learn more! Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 31 One Phase Power Distribution Block * Quick mounting and wiring * IP20 Finger Safe * DIN Rail or Panel Mount * Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) * Accessories increase the number of outputs with only one input (applies only to 38041 and 38032) * No caps to open / remove * Material Housing: Polyamide Metal Body: Brass Part Number: DB16 38049 DB35 38041 DB16* 38049 DB35* 38041 UL File E220514 Approvals UL File E98082 UL File E220514 UL File E98082 Current Rating 80A 80A 80A 80A 115A 125A 115A 125A Voltage Rating 600V AC 690V AC 600V AC 690V AC 600V AC 690V AC 600V AC 690V AC SCCR 10kA No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Wire Range Torque Screw Type Optional Marking Tag **(for DB16 and DB35) 1 8-4 AWG 13.5lb.-in. 100kA 1 6-16mm2 1.5Nm 1 8-4 AWG 13.5lb.-in. Pozi Drive 2 6 6 (2x)8-4 AWG (2x)6-16mm2 13.5lb.-in. 1.5Nm (4x)14-10 AWG (4x)2.5-6mm2 7.2lb.-in. 0.8Nm Pozi Drive 2 10kA 1 6-16mm2 1.5Nm Pozi Drive 2 6 6 (2x)8-4 AWG (2x)6-16mm2 13.5lb.-in. 1.5Nm (4x)14-10 AWG (4x)2.5-6mm2 7.2lb.-in. 0.8Nm Pozi Drive 2 MT2** 1 8-2 AWG 31lb.-in. 100kA 1 10-35mm2 3.5Nm 1 8-2 AWG 13.5lb.-in. 1 10-35mm2 3.5Nm Pozi Drive 2 6 6 14-6 AWG 2.5-16mm2 17.5lb.-in. 2Nm Pozi Drive 2 6 6 14-6 AWG 2.5-16mm2 17.5lb.-in. 2Nm Pozi Drive 2 Pozi Drive 2 MT2** Dimensions: 38041 * Available in colors. COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R 32 Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Fork Type Busbar 38045 38041 Accessories: Fork Type Busbar Part No: 38045 to jump 2 Blocks 38046 to jump 8 Blocks can be cut Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com One Phase Power Distribution Block 38076 Part Number: Approvals 38076 UL File E98082 38032 38074 38032 38074 UL File E98082 UL File E98082 Current Rating 115A 125A 160A 160A 175A 175A Voltage Rating 600V AC 690V AC 600V AC 690V AC 600V AC 690V AC SCCR No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Screw Type 100kA 1 8-2 AWG 53lb.-in. 100kA 1 10-35mm2 6Nm 1 8-2/0AWG 35.5lb.-in. 10 2.5-16mm2 3Nm 6 14-6 AWG 17.5lb.-in. Hex 4 10 14-4 AWG 26.5lb.-in. 100kA 1 10-70mm2 4Nm 1 6-2/0AWG 53lb.-in. 6 2.5-16mm2 2Nm 10 14-4 AWG 26.5lb.-in. Hex 5 Hex 3 1 16-70mm2 6Nm Hex 5 Hex 3 10 2.5-16mm2 3Nm Hex 3 Dimensions: 58 mm (2.28 in) 58 mm (2.28 in) 5.2 mm (0.20 in) 71 mm (2.80 in) 19.9 mm (0.78 in) 5.2 mm (0.20 in) 71 mm (2.80 in) 19.9 mm (0.78 in) 38.5 mm (1.52 in) 38.5 mm (1.52 in) 5.2 mm (0.20 in) 5.2 mm (0.20 in) 13.8 mm (0.54 in) 17.4 mm (0.69 in) 43 mm (1.69 in) 13.8 mm (0.54 in) 17.4 mm (0.69 in) 43 mm (1.69 in) 45 mm (1.77 in) 45 mm (1.77 in) 38032 38032 Copper Jumper Bar 3803221 Accessories: Copper Jumper Bar (6x15 mm) Part No: 3803221 for 2 Blocks 3803231 for 3 Blocks 3803241 for 4 Blocks can be cut Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 33 One Phase Power Distribution Block * * * * Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices (height 95mm, depth 44.5mm) * Accessories increase the number of outputs with only one input. * No caps to open or remove * Material Housing: Polyamide Metal Body: Brass 38019 38020 Part Number: Approvals 38020 38019 UL File E98082 UL File E98082 Current Rating 230A 250A 310A 400A Voltage Rating 600V AC 690V AC 600V AC 690V AC SCCR No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Wire Range Torque Wire Range Torque Screw Type 100kA 1 2-4/0AWG 170lb.-in. 100kA 1 35-120mm2 19Nm Hex 6 11 11 (2x) 14-2AWG (2x) 2.5-35mm2 31lb.-in. 3.5Nm (5x) 14-6AWG (5x) 2.5-16mm2 17.5lb.-in. 2Nm (4x) 14-8AWG (4x) 2.5-10mm2 17.5lb.-in. 2Nm standard screwdriver 1 3/0-350mcm 230lb.-in. 1 95-185mm2 25Nm Hex 8 11 11 (2x) 14-2AWG (2x) 2.5-35mm2 31lb.-in. 3.5Nm (5x) 14-6AWG (5x) 2.5-16mm2 17.5lb.-in. 2Nm (4x) 14-8AWG (4x) 2.5-10mm2 17.5lb.-in. 2Nm standard screwdriver Dimensions: 34 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Three Phase Power Distribution Block 38073 38075 * * * * Quick mounting and wiring IP20 Finger Safe DIN Rail or Panel Mount Blocks fit with other DIN Rail mountable modular devices * Same compact size for both ratings * No caps to open or remove * Material Housing: Polyamide Metal Body: Brass 3 Pole Part Number: Approvals Current Rating Voltage Rating 38075 UL File E98082 38073 115A 115A 600V AC 690V AC SCCR No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Screw Type 3 Pole UL File E98082 175A 175A 600V AC 690V AC 100kA 3x1 8-2AWG 31lb.-in. 100kA 3x1 10-35mm2 3.5Nm 3x1 8-2/0AWG 35.5lb.-in. 3x6 2.5-16mm2 2Nm 3x6 14-4AWG 17.5 lb.-in. Hex 4 3x6 14-4AWG 17.5lb.-in. Hex 3 3x1 10-70mm2 4Nm Hex 5 3x6 2.5-16mm2 2Nm Hex 3 Dimensions: Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 35 Splicer Blocks * Quick mounting and wiring * IP20 Finger Safe * DIN Rail or Panel Mount * No caps to open or remove * Material Housing: Polyamide Metal Body: Aluminum Part Number: Approvals 38064 38057 38059 38064 38057 38059 UL File E98082 Current Rating 175A 175A Voltage Rating 600V AC 690V AC No. of Inputs Wire Range Torque Screw Type No. of Outputs Wire Range Torque Screw Type 1 14-1AWG 106.2lb.-in. UL File E98082 1 2.5mm2-50mm2 12Nm Hex 5 1 1 14-1AWG 2.5mm2-50mm2 106.2lb.-in. 12Nm Hex 5 400A 400A 600V AC 690V AC UL File E98082 800A 800A 600V AC 690V AC 1 1 2 2 6AWG-400MCM 16mm2-185mm2 3AWG-600MCM 25-300mm2 221lb.-in. 25Nm 310lb.-in. 35Nm Hex 10 Hex 10 1 1 2 2 6AWG-400MCM 16mm2-185mm2 3AWG-600MCM 25-300mm2 221lb.-in. 25Nm 310lb.-in. 35Nm Hex 10 Hex 10 Dimensions: 145 mm [5.71 in] 124.4 mm [4.90 in] 145.5 mm [5.73 in] 72.3 mm (2.85 in) 34.7 mm (1.37 in) 43.2 mm (1.70 in) 59.6 mm (2.35 in) 53.5 mm [2.11 in] 80.5 mm [3.17 in] 129 mm [5.08 in] 39 mm [1.54 in] 7 mm [0.28 in] 7.5 mm [0.30 in] 25.4 mm (1.0 in) 50 mm (1.97 in) 7 mm [0.28 in] 12 mm [0.47 in] 36 72 mm [2.83 in] 80.5 mm [3.17 in] Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Thermocouple Blocks CTT2.5UK/J/T/E Altech thermocouple terminal blocks are designed for use in temperature measuring circuits. The current carrying part of the terminal blocks have the same material (according to DIN437134 and DIN43714) which is used for compensating cables in the temperature measurement circuit (up to 200C). The terminal block is marked for the respective type of thermocouple which enables easy identification for wiring. Terminal Width 10 mm Height x Length 45 x 43 mm Stripping Length 9 mm Polyamide 6.6 Insulation Material Current Carrying Material * * CTT2.5UK `K' type Chromel (NiCr) Alumel (NiAl) * CTT2.5UJ `J' type Iron (Fe) Constantan (CuNi) Type of Connection * 4 screw clamps 24-12 AWG Wire Range Voltage Rating 300 V Current Rating 10 A 7 lb-in Torque Cat. No. Std. Pk. * CTT2.5UT `T' type Copper (Cu) Constantan (CuNi) Terminal Block * CTT2.5UE `E' type Chromel (NiCr) Constantan (CuNi) CTT2.5UK CTT2.5UJ CTT2.5UT CTT2.5UE 50 50 50 50 End Plate EP2.5/4UN 50 Isolation Plate PP2.5/4UN 50 End Clamp CA802 CA702 100 100 Marking Tags (MT Type) CA509/K5 DIN Rail for ordering information refer to page 63 Thermocouple Terminal Block Compensating Cable Supply Cable Thermocouple (Sensor) Measuring Instrument Thermocouple Terminal Block Reference Junction Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 37 Indicator/ Diode Circuit CDL4U(E)D1/D2 Altech offers different types of terminals incorporating electronic components for signal converting, circuit protection and status indication. Based on customer requirements, specially assembled terminals are offered. CDL4U(E)D3 With arc suppression circuit for contactors and solenoid valves - DC Diode circuit for reverse polarity protection Terminal Width 6 mm 6 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm Terminal Voltage 300 V~ 300 V~ Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Approvals E220514 22-10 AWG 0.5-4 sq.mm Wire Range E220514 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 600 V 400 V 600 V 600 V 400 V 600 V Current Rating 25 A 32 A 35 A 25 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDL4U(E)D1 CDL4U(E)D2 100 100 CDL4U(E)D3 100 End Plate EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA703/1 CA704/2 CA705/3 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/2 CA705/3 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Shorting Sleeve & Screw CA607/S/Q 100 CA607/S/Q 100 Example: CTS2.5U-N/R Marking Tags MT2 100 MT2 100 Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB 1 2 C 3 Diode Specifications Diode 4 1 1N 4007 1A 3 2 4 C D3 D1 2 Diode Reverse Voltage 1000 V Diode Current 1 C 3 4 D2 38 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Indicator/ Diode Circuit CDL4U(E)DD1/DD2 CDL4U(E)DD3/DD4 Diode circuit for lamp testing CDL4U(E)D4 Diode circuit for lamp testing CDL4U(E)DD5 Diode circuit for lamp testing with LED series resistance Diode circuit for lamp testing with LED series resistance 6 mm 6 mm 6 mm 6 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 300 V~ 300 V~ 12V~/24 V~ 12V~/24 V~ 9 mm 9 mm 9 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CDL4U(E)DD1 CDL4U(E)DD2 100 100 CDL4U(E)DD3 CDL4U(E)DD4 100 100 CDL4U(E)D4 100 CDL4U(E)DD5 100 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 MT2 100 MT2 100 MT2 100 MT2 100 1 DD1 1 3 C C 3 DD2 +4 C +3 1 2 C C 2 1 2 -4 +3 C DD3 C 1 +4 C D4 2 C 3 1 2 +4 3 2 C C +4 DD5 +4 DD4 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 39 Indicator/ Diode Circuit CDL4U(E)N1 CDL4U(E)LD5* CDL4U(E)LD3* AC voltage indicator with neon lamp AC voltage indicator with LED AC/ DC voltage indicator with LED Terminal Width 6 mm 6 mm 6 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm Terminal Voltage 110 V~ to 220 V~ 24 V~, 48 V~, 120V~, 220V~ 12 V~, 24 V~ Stripping Length 9 mm 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Approvals E220514 Wire Range 22-10 AWG 0.5-4 sq.mm 22-10 AWG E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V Current Rating 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDL4U(E)N1 50 CDL4U(E)LD5* 50 CDL4U(E)LD3* 50 End Plate EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 Shorting Sleeve & Screw CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 Marking Tags MT2 100 MT2 100 MT2 100 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole 2 1 3 +1 1 4 N1 3 C LD5 4 +3 +4 LD3 * Add required voltage to part number as a suffix i.e. CDL4U(E)LD5/110 is for 110V. 40 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Indicator/ Diode Circuit CDL4U(E)LD4* CDL4U(E)LD1/LD2 AC/ DC voltage indicator with LED DC voltage indicator with LED CDL4U(E)L1/L2* CDL4U(O) DC voltage indicator with LED Electronic Component Carrier 6 mm 6 mm 6 mm 6 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 24V~, 48 V~ 24 V- 6 V-, 24 V-, 60 V- 9 mm 9 mm 9 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 E220514 E220514 E220514 E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 22-10 AWG 0.5-4 sq.mm 22-10 AWG 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V 600 V 400 V 600 V 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 25 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in 7 lb-in 0.5 Nm 7 lb-in Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CDL4U(E)LD4* 50 CDL4U(E)LD1 CDL4U(E)LD2 50 50 CDL4U(E)L1* CDL4U(E)L2* 50 50 CDL4U(O) 100 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 CA607/S/Q 100 MT2 100 MT2 100 MT2 100 MT2 100 -1 +3 C +1 +4 C -3 -1 +3 +1 -4 -3 LD1 C -4 -1 +4 LD2 L1 +3 +4 L2 * Add required voltage to part number as a suffix i.e. CDL4U(E)LD5/110 is for 110V. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 41 Surge Suppressor In applications where circuit protection against transient overvoltage is required, Altech Surge Suppressor Terminal Blocks with built-in electronic components are recommended. These terminals are designed to protect a single line against a longitudinal (line / earth) surge, thereby protecting distribution and inputs. Note: CDL4U(E)SDU - For D.C. Application CDL4U(E)LA CDL4U(E)3LA Lightning Arrestor 3 Pole Lightning Arrestor Terminal Width 12 mm 18 mm Height x Length 54 x 55.5 mm 54 x 55.5 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 CDL4U(E)SDB - For A.C. Application Type of Connection 4 screw clamps 4 screw clamps A - Anode Wire Range 22-10 AWG 22-10 AWG K - Cathode Voltage Rating 75, 90, 240, 600, 1000 V DC 90, 250, 350, 450 V DC 20 KA (8/20s) 10 KA (8/20s) - - 100 ns 100 ns 10A 5A Capacitance <1.5 pf <1.0 pf Application For coarse line protection of measuring, distributing or data communication interfaces. For simultaneous protection of lines against transversal (line/line) and longitudinal (line/earth) surge. Nominal Discharge Current Peak Current * Add required voltage to part number as a suffix i.e. CDL4U(E)LA/75 is for 75V. Response Time Nominal Current Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CDL4U(E)LA75V CDL4U(E)LA90V CDL4U(E)LA230V CDL4U(E)LA600V CDL4U(E)LA1000V 20 20 20 20 20 CDL4U(E)3LA90V CDL4U(E)3LA230V CDL4U(E)3LA350V CDL4U(E)3LA600V 20 20 20 20 End Plate EPCDL4U 50 EPCDL4U 50 End Stop for ordering information refer to page 72 CA702 CA802 50 50 CA702 CA802 50 50 Marking Tags (MT Type) MT2 100 MT2 100 DIN Rail for ordering information refer to page 70 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 42 Ordering Suffix R BU BL O G Y W BG DB Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Surge Suppressor CDL4U(E)MOV1 MOV CDL4U(E)SD CDL4U(E)RC Suppressor Diode RC Circuit 12 mm 12 mm 18 mm 54 x 55.5 mm 54 x 55.5 mm 54 x 55.5 mm 9 mm 9 mm 9 mm Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 4 screw clamps 4 screw clamps 4 screw clamps 22-10 AWG 22-10 AWG 22-10 AWG 130 V AC* 12-48V DC / 12-160V AC** 250 V AC / 330 V DC - 1.5 KA 20A 2kA-6.5kA (8/20s) - - <25ns 1 ns DC / 5 ns AC - 10A 10A 10A - 0.1 f or 0.22 f2 For fine protection of data interfaces, sensors, contacts, etc. For protection of DC solenoid valves and contactors 100-20,000 pf For protection from voltage surge, spikes Cat. No. Std. Pk. Cat. No. Std. Pk. Cat. No. Std. Pk. CDL4U(E)MOV30V CDL4U(E)MOV60V CDL4U(E)MOV75V CDL4U(E)MOV130V CDL4U(E)MOV275V CDL4U(E)MOV460V CDL4U(E)MOV510V CDL4U(E)MOV625V CDL4U(E)MOV680V 20 20 20 20 20 20 20 20 20 CDL4U(E)SDUA15V CDL4U(E)SDUA24V CDL4U(E)SDUA48V CDL4U(E)SDUK15V CDL4U(E)SDUK24V CDL4U(E)SDUK48V CDL4U(E)SDB15V CDL4U(E)SDB24V CDL4U(E)SDB48V CDL4U(E)SDB160V 20 20 20 20 20 20 20 20 20 20 CDL4U(E)RC0.1 CDL4U(E)RC0.22 20 20 EPCDL4U 50 EPCDL4U 50 EPCDL4U 50 CA702 CA802 50 50 CA702 CA802 50 50 CA702 CA802 50 50 MT2 100 MT2 100 MT2 100 SDUA SDB SDUK 1 A fuse block is recommended to protect MOV terminals by disconnecting the faulted varistor. See pages 18-21 for fuse blocks. * Other voltages available upon request. Call Altech for voltage selection. ** Phase to Phase / Phase to ground. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 43 Mini Feed-Through 15mm CMT4 For wire-to-wire connecting in control, automation, instrumentation and power distribution applications. CGMT4 Altech "miniature" terminal blocks offer tremendous space advantage as demanded by certain wiring configurations. Terminal Width 6 mm 6 mm Height x Length 29 x 27 mm 28.5 x 27 mm Stripping Length 9 mm 9 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross connection 2 screw clamps Approvals E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG Voltage Rating 300 V 400 V 300 V Current Rating 35 A 32 A 35 A 6 lb-in 0.5 Nm 7 lb-in Wire Range Torque E220514 22-10 AWG 0.5-4 sq.mm 22-10 AWG 32A 7 lb-in 0.5 Nm Other Approvals 7 lb-in AEx eII Ex eII Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CMT4 100 CGMT4 50 End Plate EPCMT4 50 Isolation Partition PPCMT4 50 CA602 100 MT2 100 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 MT2 100 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) 44 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Mini Feed-Through Fuse Block, 5 x 20 and 5 x 25 mm Altech fuse terminals are also available with light indication CSFL 4U (L). A specially de-signed built-in circuit gives light indication in the event of fuse blow out. Fuses are sold separately Altech, see pages 23-24. CSFL4U(L)* CSFL4U Certain electrical and control systems require protection by fuses. The terminal has a hinged carrier that has a specially designed space for a cartridge type glass fuse of size O5 x 20 or O5 x 25 mm. The fuse can be engaged or disengaged by the movement of the carrier. Terminal Width Fuse not included. 8 mm 8 mm Height x Length 43 x 58 mm 43 x 58 mm Stripping Length 9.5 mm 9.5 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw clamps 2 screw clamps 24V AC/DC, 48V AC/DC, 110V AC/DC, 220V AC, 300V AC LED Voltage *Add required voltage to part number as a suffix, i.e. CSFL4U(L)/24 for 24V DC Fuse not included. O5x20, O5x25mm Type of Fuse Used O5x20, O5x25mm Approvals E220514 E220514 22-10 AWG 22-10 AWG 22-10 AWG 22-10 AWG Voltage Rating 600 V 600 V 600 V 600 V Current Rating 6.3 A 10 A 6.3 A 10 A Torque 7 lb-in 7 lb-in 7 lb-in 7 lb-in Wire Range Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CSFL4U 100 CSFL4U(L)* 100 End Plate EPCSFL4U 50 EPCSFL4U 50 Isolation Partition PPCSFL4U 50 PPCSFL4U 50 CA602 100 CA602 100 CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 CA711/2 CA711/3 CA711/4 CA711/10 100 50 50 20 MT8 MT2 100 100 MT8 MT2 100 100 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Internal Jumper 2 pole 3 pole 4 pole 10 pole Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole Current Bars 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw External Jumper 2 pole 3 pole 4 pole 10 pole Marking Tags (MT Type) (MT Type on Lever) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 45 Mini Feed-Through Panel Mount CMB4 For use when space constraints require extremely compact solutions and internal jumping is required. Individual components can be used to build your own assemblies. Just snap the required number of terminal block components together and place a Mounting Section on each end. The CMB4 accepts internal jumpers and standard marking tags. EPCMB4 Terminal Width 6 mm Height x Length 28 x 27 mm Stripping Length 9 mm Insulation Material Polyamide 6.6 Type of Connection 2 screw clamps & 1 tapped hole for cross connect. Preassembled blocks are also available for quick and easy installations. See Dimensions below. * Extremely compact and cost effective * High density * Screw-cage clamp * Internal jumping provision * Polyamide 6.6 * Standard color: gray Approvals E220514 22-10 AWG Wire Range 0.5-4 sq.mm 22-10 AWG Voltage Rating 300 V 400 V 300 V Current Rating 35 A 32 A 35 A 7 lb-in 0.5 Nm 7 lb-in Torque Dimensions mm (in.) CMB4 Other Approvals Cat. No. Std. Pk. Terminal Block CMB4 100 Mounting Section EPCMB4 50 Separator Plate SPCMB4 100 Mounting Screw* Any length M3 screw may be used. Internal Jumper 2 pole 3 pole 4 pole 10 pole CA727/2 CA727/3 CA727/4 CA727/10 100 100 100 10 Insulated Internal Jumper 2 pole 3 pole 4 pole 10 pole CA747/2 CA747/3 CA747/4 CA747/10 100 100 100 10 CA703/1 CA704/1 CA705/1 CA732/10 CA732/10-A CA732/100 100 100 100 100 100 10 CA607/S/Q 100 CA714/2 CA714/3 CA714/4 CA714/10 100 100 100 20 MT2 100 Current Bars COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown Ordering Suffix R BU BL O G Y W BG DB 2 pole 3 pole 4 pole 10 pole 10 pole (breakable) 100 pole Shorting Sleeve & Screw 2 pole 3 pole 4 pole 10 pole External Jumper Marking Tags b a (MT Type) No. of Cat No. Poles CMB4/2 2 CMB4/3 3 CMB4/4 4 CMB4/5 5 CMB4/6 6 CMB4/7 7 CMB4/8 8 CMB4/9 9 CMB4/10 10 CMB4/11 11 CMB4/12 12 CMB4/13 13 CMB4/14 14 CMB4/15 15 CMB4/16 16 CMB4/17 17 CMB4/18 18 CMB4/19 19 CMB4/20 20 CMB4/21 21 CMB4/22 22 CMB4/23 23 CMB4/24 24 Hole Width (a) Spacing (b) 26 (1.02) 19 (0.75) 32 (1.26) 25 (0.98) 38 (1.50) 31 (1.22) 44 (1.73) 37 (1.46) 50 (1.97) 43 (1.69) 56 (2.20) 49 (1.93) 62 (2.44) 55 (2.17) 68 (2.68) 61 (2.40) 74 (2.91) 67 (2.64) 80 (3.15) 73 (2.87) 86 (3.39) 79 (3.11) 92 (3.62) 85 (3.35) 98 (3.86) 91 (3.58) 104 (4.09) 97 (3.82) 110 (4.33) 103 (4.06) 116 (4.57) 109 (4.29) 122 (4.80) 115 (4.53) 128 (5.04) 121 (4.76) 134 (5.28) 127 (5.00) 140 (5.51) 133 (5.24) 146 (5.75) 139 (5.47) 152 (5.98) 145 (5.71) 158 (6.22) 151 (5.94) Mounting Section EPCMB4 * Any length M3 screw may be used. 46 Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Busbar System CENC4 A quick reliable solution for ground, neutral or low voltage distribution applications. The Busbar System consists of a busbar, busbar supports, and screw clamp terminals for terminating wires NEB 10 (10 x 3 mm) and NEB 6 (6 x 6 mm), tin plated copper busbars are available in one meter lengths. Both have a 140A current carrying capacity. NES plastic support with fixing screws for holding 10 x 3 & 6 x 6 busbar makes placing of busbar an easy task. Busbars up to 200 mm length should be supported at ends by two busbar supports. For busbars exceeding 200 mm length, it is recommended to provide intermediate busbar support. Easy to operate CENC clamp secures wire to the busbar. CENC16 CENC35 Terminal Width 7.5 mm 9.8 mm 14.5 mm Height x Length 30 x 23.3 mm 36 x 23.3 mm 45 x 27.3 mm Stripping Length 12 mm 16 mm 16 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 1 screw clamp connection 1 screw clamp connection 1 screw clamp connection Approvals E220514 Wire Range Current Rating* Torque E220514 E220514 22-10 AWG 0.5-6 sq.mm 22-12 AWG 10-4 AWG 6-16 sq.mm 10-6 AWG 8-2 AWG 10-35 sq.mm 8-2 AWG 35 A 41 A 14 lb-in 0.8 Nm 14 lb-in 80 A 76 A 14 lb-in 2.0 Nm 125 A 125 A 17.5 lb-in 25 lb-in 2.5 Nm 25 lb-in Other Approvals Cat. No. Std. Pk. Cat. No. Cat. No. CENC4 Busbar (10 x 3 mm) NEB10 1m NEB10 1m NEB10 1m Busbar (6 x 6 mm) NEB6 1m NEB6 1m NEB6 1m Plastic Support with Fixing Screw NES 50 NES 50 NES 50 End Clamp/Bus bar support for rail mounting CA202 50 CA202 50 CA202 50 Marking Tags (MT Type) MT5 100 MT6 100 MT6 100 50 CENC35 Std. Pk. Terminal Block** 50 CENC16 Std. Pk. 50 * 140A current carrying capacity of busbar should be taken into account while connecting loads. ** Consult for other available colors. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 47 Stud Type Block CSTSN4U Altech DIN rail mounting Stud Type Terminal Blocks are preferred for the connections that are subjected to very severe vibrations. CSTSN5U The wire is crimped to a ring / fork type lug and is screwed on to the flat current bar in terminal. The range includes terminal blocks for wires of size 22-4 AWG. Jumpering can be achieved with the aid of external jumpers. The jumpers are insulated to make them shock proof. The terminal blocks have marker holding recess to accommodate MT type marking tags. It is recommended to use protective covers in transparent plastic because assemblies of these terminals blocks are not fully covered. Terminal Width 17 mm 17 mm Height x Length 39.5 x 50 mm 39.5 x 50 mm Stripping Length 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw connection for M4 ring/fork lugs 2 screw connection for M5 ring/fork lugs Approvals E220514 E220514 22-6 AWG 1.5-10 sq.mm 22-6 AWG 22-4 AWG 1.5-16 sq.mm 22-4 AWG Voltage Rating 600 V 800 V 600 V 600 V 800 V 600 V Current Rating 65 A 57 A 65 A 80 A 76 A 80 A 14 lb-in 1.2 Nm 14 lb-in 17.5 lb-in 2.0 Nm 17.5 lb-in Wire Range Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CSTSN4U 100 CSTSN5U 100 End Plate EPCSTSN5U 50 EPCSTSN5U 50 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 COLOR BLOCKS (other than grey standard) When ordering please add color suffix to Cat. No. Example: CTS2.5U-N/R Color Red Blue Black Orange Green Yellow White Beige Dark Brown 48 Ordering Suffix R BU BL O G Y W BG DB Protective Cover for covering 2 Terminal 3 Terminal CSTSPC1 CSTSPC1-1 100 100 CSTSPC1 CSTSPC1-1 100 100 Protective Cover in Length 100 mm 200 mm 300 mm CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 10 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 10 Insulated Removable Jumpers 2 way 3 way 4 way CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 Insulated Permanent Jumpers 2 way 3 way 4 way CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 MT2 100 MT2 100 Marking Tags (MT Type) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Stud Type Block CSTSB4U CSTSB5U Terminal Width 17 mm 17 mm Height x Length 39.5 x 50 mm 39.5 x 50 mm Stripping Length 12 mm 12 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Type of Connection 2 screw connection for M4 ring/fork lugs 2 screw connection for M5 ring/fork lugs Approvals E220514 E220514 22-6 AWG 1.5-10 sq.mm 22-6 AWG 22-4 AWG 1.5-16 sq.mm 22-4 AWG Voltage Rating 600 V 800 V 600 V 600 V 800 V 600 V Current Rating 65 A 57 A 65 A 80 A 76 A 80 A 14 lb-in 1.2 Nm 14 lb-in 17.5 lb-in 2.0 Nm 17.5 lb-in Wire Range Torque Other Approvals Cat. No. Std. Pk. Cat. No. Std. Pk. Terminal Block CSTSB4U 100 CSTSB5U 100 End Plate EPCSTN5U 50 EPCSTN5U 50 CA702 CA802 50 50 CA702 CA802 50 50 DIN Rail for ordering information refer to page 70 End Stop for ordering information refer to page 72 Protective Cover for covering 2 Terminal 3 Terminal CSTSPC1 CSTSPC1-1 100 100 CSTSPC1 CSTSPC1-1 100 100 Protective Cover in Length 100 mm 200 mm 300 mm CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 10 CSTSPC1-2 CSTSPC1-3 CSTSPC1-4 10 10 10 Insulated Removable Jumpers 2 way 3 way 4 way CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 CA514/1-2 CA514/1-3 CA514/1-4 100 50 50 Insulated Permanent Jumpers 2 way 3 way 4 way CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 CA514/3-2 CA514/3-3 CA514/3-4 100 50 50 MT2 100 MT2 100 Marking Tags (MT Type) Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 49 Hinge Type Stud Block STH4 STH Series Terminal Blocks are preferred for application where the connections are subjected to severe vibration. The wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. The hinged carrier should be lifted to insert the lugs and then fastened to complete the Terminal Width connection. By virtue of the hinged design, the Terminal Blocks apart from shrouding the live parts, providing IP 20 (Finger Safe) protection, saves considerable time in wiring. STH4DTSH 11 mm 11 mm 22 mm Height x Length 50.5 x 46 mm 50.5 x 86 mm 50.5 x 86 mm Stripping Length 10 mm 10 mm 10 mm Insulation Material Polyamide 6.6 Polyamide 6.6 Polyamide 6.6 Type of Connection 2 stud flat connection 2 stud flat connection 2 stud flat connection Stud Size / Operated by M4 / Screwdriver M4 / Screwdriver M4 / Screwdriver Two Lugs can be connectApprovals ed to the Terminal, without sacrificing the safety of the Terminal Block. Wire Range E220514 22-8 AWG 1.5-6 sq.mm 22-8 AWG E220514 22-8 AWG 1.5-6 sq.mm 22-8 AWG E220514 22-8 AWG 1.5-6 sq.mm 22-8 AWG STH4DT Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers. Voltage Rating 600 V 800 V 600 V 600 V 800 V 600 V 600 V 800 V 300 V Current Rating 50 A 41 A 50 A 50 A 41 A 35 A 10 A 10 A 25 A 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in 14 lb-in 1.2 Nm 14 lb-in Socket Headed Screws act as test monitoring point on either side of the Terminal Block. Disconnection is achieved by means of a slide link operated with a Screw Driver. STH4DTSH Terminal Block has 2 STH4DT Terminal Block shorted to achieve switchable cross connection (on one side). Note: The disconnecting device is not suitable for interrupting load. The supply must be switched off before operating the slide link / moving the hinged carrier. Torque Other Approvals Cat. No. Std. Pk. Terminal Block STH4 100 STH4DT 100 STH4DTSH 100 End Plate EPSTH4 50 EPSTH4DT 50 EPSTH4DT 50 Cat. No. Std. Pk. Cat. No. Std. Pk. CA702 CA802 100 50 CA702 CA802 100 50 CA702 CA802 100 50 DIN Rail for ordering information refer to page 70 End Stop for ordering info. refer to page 72 Removable Shorting Link 2 way 3 way 4 way CA512/13-2 CA512/13-3 CA512/13-4 100 50 50 CA512/13-2 CA512/13-3 CA512/13-4 100 50 50 CA512/13-2 CA512/13-3 CA512/13-4 100 50 50 Insulated Removable Shorting Link 2 way 3 way 4 way CA514/13-2 CA514/13-3 CA514/13-4 100 50 50 CA514/13-2 CA514/13-3 CA514/13-4 100 50 50 CA514/13-2 CA514/13-3 CA514/13-4 100 50 50 Permanant Shorting Link 2 way 3 way 4 way CA512/14-2 CA512/14-3 CA512/14-4 100 50 50 CA512/14-2 CA512/14-3 CA512/14-4 100 50 50 CA512/14-2 CA512/14-3 CA512/14-4 100 50 50 Insulated Permanent Jumpers 2 way 3 way 4 way CA514/14-2 CA514/14-3 CA514/14-4 100 50 50 CA514/14-2 CA514/14-3 CA514/14-4 100 50 50 CA514/14-2 CA514/14-3 CA514/14-4 100 50 50 CA509/K10 100 CA509/K10 100 CA509/K10 100 Marking Tags (K Type) 50 STH4DT Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com Power Block PTB35 PTB seriesTerminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holds the Terminal Block rigidly on to the Mounting Rail. Two Lugs of 35 sq.mm can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. Hinged Protective Cover makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag. PTB35SH Terminal Width 25 mm 25 mm Height x Length 62 x 113 mm 65 x 169 mm Stripping Length 18 mm / M6 18 mm / M6 Insulation Material Polyamide 6.6 Polyamide 6.6 TheTerminal Blocks can be stacked together by pressing the adjacent Terminal Blocks firmly*. In PTB35SH series Terminal Blocks, adjacent terminals can be shorted by removing a thin wall partition and using 2/3/4 way shorting link. Type of Connection 2 bolts for connection 2 bolts for connection Optional Marker Holder MHPTB35 can be used for installing marking tags on the Terminal Blocks without protective covers. Approvals UL UL 8-2 AWG 16-35 sq.mm 8-2 AWG Voltage Rating 600 V 1000 V 600 V 600 V 1000 V 600 V Current Rating 130 A 125 A 130 A 130 A 125 A 130 A 27 lb-in 3.0 Nm 27 lb-in 27 lb-in 3.0 Nm 27 lb-in Wire Range Torque 8-2 AWG 16-35 sq.mm 8-2 AWG Other Approvals * M3 Screw of desired length with nut can be used optionally to secure the stack. Cat. No. Std. Pk. PTB35 100 PTB35SH 100 End Stop for ordering information refer to page 72 CA702 CA102 CA202 100 50 50 CA702 CA102 CA202 100 50 50 Protective Cover PSPTB35 40 Marker Holder MHPTB35 40 CA703/9 CA704/9 CA705/9 10 10 10 CA703/9 CA704/9 CA705/9 CA509/K9 100 CA509/K9 Terminal Block Cat. No. Std. Pk. DIN Rail for ordering information refer to page 70 Internal Jumper Marking Tags (K Type) 2 way 3 way 4 way 10 10 10 100 Marker Holder UL recognition in progress. Altech Corp.(R) * 35 Royal Road * Flemington, NJ 08822-6000 * Phone (908)806-9400 * FAX (908)806-9490 * www.altechcorp.com 51