MB2S thru MB6S Miniature Glass Passivated Single-Phase TO-269AA (MBS) Surface Mount Bridge Rectifier 0.029 (0.74) 0.017 (0.43) Reverse Voltage 200 to 600V Forward Current 0.5A Mounting Pad Layout 0.272 (6.90) 0.252 (6.40) 0.161 (4.10) 0.144 (3.65) 0.023 MIN. (0.58 MIN.) Dimensions in inches and (millimeters) 0.272 MAX. (6.91 MAX.) 0.105 (2.67) 0.095 (2.41) 0.030 MIN. (0.76 MIN.) 0.195 (4.95) 0.179 (4.55) 0.205 (5.21) 0.195 (4.95) 0-8 o 0.049 (1.24) 0.039 (0.99) 0.114 (2.90) 0.106 (2.70) 0.094 (2.40) 0.090 (2.30) 0.105(2.67) 0.095(2.41) 0.062 (1.57) 0.058 (1.47) 0.0075 (0.19) 0.0065 (0.16) 0.038 (0.96) 0.019 (0.48) Mechanical Data 0.008 (0.20) 0.004 (0.10) 0.114 (2.90) 0.110 (2.80) 0.016 (0.41) 0.006 (0.15) Features 0.018 (0.46) 0.014 (0.36) * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * This series is UL recognized under Component Index, file number E54214 * Glass passivated chip junctions * High surge overload rating: 35A peak * Saves space on printed circuit boards * High temperature soldering guaranteed: 260C/10 seconds. 0.058 (1.47) 0.054 (1.37) Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.078 oz., 0.22 g Packaging codes/options: 30/3K per 13" Reel (12mm tape) Maximum Ratings and Thermal Characteristics (T A Parameter Symbol Device marking code = 25C unless otherwise noted) MB2S MB4S MB6S 2 4 6 Unit Maximum repetitive peak reverse voltage VRRM 200 400 600 V Maximum RMS voltage VRMS 140 280 420 V Maximum DC blocking voltage VDC 200 400 600 V Maximum average forward output rectified current (see Fig. 1) on glass-epoxy P.C.B. on aluminum substrate IF(AV) 0.5(1) 0.8(2) A Peak forward surge current 8.3msec single half sine-wave superimposed on rated load (JEDEC Method) IFSM 35 A I2t 5.0 A2sec Rating for fusing (t < 8.3ms) Typical thermal resistance per leg Operating junction and storage temperature range Electrical Characteristics (T A (1) RJA RJA RJL 85 70(2) 20(1) C/W TJ, TSTG -55 to +150 C = 25C unless otherwise noted) Max. instantaneous forward voltage drop per leg at 4.0A VF 1.0 V TA = 25C TA = 125C IR 5.0 100 A CJ 13 pF Maximum DC reverse current at rated DC blocking voltage per leg Typical junction capacitance per leg(3) Notes: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads (2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad (3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts 6/15/00 MB2S thru MB6S Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier Ratings and Characteristic Curves (T = 25C unless otherwise noted) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Leg Fig. 1 - Derating Curve for Output Rectified Current 35 0.8 Aluminum Substrate 0.7 Peak Forward Surge Current (A) Average Forward Rectified Current (A) A 0.6 0.5 Glass Epoxy P.C.B. 0.4 0.3 0.2 0.1 Resistive or Inductive Load TA = 40C Single Half Sine-Wave (JEDEC Method) 30 25 20 15 10 1 Cycle 5.0 0 0 0 20 40 60 80 100 120 140 160 Number of Cycles Fig. 3 - Typical Forward Voltage Characteristics Per Leg Fig. 4 - Typical Reverse Leakage Characteristics Per Leg 100 10 TJ = 150C 1 TJ = 25C 0.1 Pulse Width = 300s 1% Duty Cycle 0.01 Instantaneous Reverse Leakage Current (A) Instantaneous Forward Current (A) 100 10 1 Ambient Temperature (C) 10 TJ = 125C 1 0.1 TJ = 25C 0.01 0.2 0.4 0.6 0.8 1.0 1.4 1.2 Instantaneous Forward Voltage (V) Fig. 5 - Typical Junction Capactitance Per Leg 30 Junction Capacitance (pF) f = 60 Hz f = 50 Hz TJ = 25C f = 1 MHz Vsig = 50mVp-p 25 20 15 10 5.0 0 0.1 1 10 Reverse Voltage (V) 100 200 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%)