Mounting Pad Layout
MB2S thru MB6S
Miniature Glass Passivated Single-Phase
Surface Mount Bridge Rectifier
Reverse V oltage 200 to 600V
Forward Current 0.5A
Maximum Ratings and Thermal Characteristics(TA= 25°C unless otherwise noted)
Parameter Symbol MB2S MB4S MB6S Unit
Device marking code 2 4 6
Maximum repetitive peak reverse voltage VRRM 200 400 600 V
Maximum RMS voltage VRMS 140 280 420 V
Maximum DC blocking voltage VDC 200 400 600 V
Maximum average forward output rectified current
(see Fig. 1) on glass-epoxy P.C.B. IF(AV) 0.5(1) A
on aluminum substrate 0.8(2)
Peak forward surge current 8.3msec single half sine-wave
superimposed on rated load (JEDEC Method) IFSM 35 A
Rating for fusing (t < 8.3ms) I2t 5.0 A2sec
RΘJA 85(1)
Typical thermal resistance per leg RΘJA 70(2) °C/W
RΘJL 20(1)
Operating junction and storage temperature range TJ, TSTG – 55 to +150 °C
Electrical Characteristics(TA= 25°C unless otherwise noted)
Max. instantaneous forward voltage drop per leg at 4.0A VF1.0 V
Maximum DC reverse current at TA= 25°C 5.0 µA
rated DC blocking voltage per leg TA= 125°C IR100
Typical junction capacitance per leg(3) CJ13 pF
Notes: (1) On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads
(2) On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad
(3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable
per MIL-STD-750, Method 2026
Mounting Position: Any Weight: 0.078oz., 0.22g
Packaging codes/options: 30/3K per 13” Reel (12mm tape)
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• This series is UL recognized under Component Index,
file number E54214
• Glass passivated chip junctions
• High surge overload rating: 35A peak
• Saves space on printed circuit boards
• High temperature soldering guaranteed: 260°C/10 seconds.