COMSET SEMICONDUCT ORS 1/2
2N2322 thru 2N2326
All-diffused PNPN thyristors designed for grating operation in mA/µA signal or detection circui ts
MAXIMUM RATINGS (*)
TJ=125°C unless other wise note d, RGK=1000Ω
Symbol Ratings 2N2322 2N2323 2N2324 2N2325 2N2326
VRSM(REP) Peak revers e blocking vo ltag e (1) 25 50 100 150 200 V
VRSM(NON-REP) Non-repetitive peak blocking reverse
voltage (t<5.0 ms) 40 75 150 225 300 V
IT(RMS) Forward Current RMS (all conduction
angles) 1.6 Amp
ITSM
Peak Surge Current
(One-Half Cycle, 60Hz)
No Repetition Until Thermal
Equilibrium is Restored.
15 Amp
PGM Peak Gate Power – For ward 0.1 W
PG(AV) Average Gate Power – Forward 0.01 W
IGM Peak Gate Current – Forward 0.1 Amp
VGFM Peak Gate Voltage – Forward 6.0 V
VGRM Peak Gate Voltage – Reverse 6.0 V
TJ Operating Junction Temperature
Range -65 to +125
TSTG Storage Temperature Range -65 to +150 °C
EL ECTRICAL CHARACTERISTICS
TJ=25°C unless otherwise noted, RGK=1000Ω
SILICON THYRISTORS
COMSET SEMICONDUCT ORS 2/2
2N2322 thru 2N2326
Symbol Ratings 2N2322 2N2323 2N2324 2N2325 2N2326
VDRM Peak Forward Blocking
Voltage (1) Min : 25 * 50 * 100 * 150 * 200 * V
IRRM Peak Reverse Blocking Current
(Rated VDRM, TJ =125°C) Max : 100 * µA
IDRM Peak Forward Blocking Current
(Rated VDRM, TJ =125°C) Max :100 * µA
Forward « on » Voltage
IT =1.0 A Peak Max :1.5
VTIT =1.0 A Peak, TC =85°C Max : 2.0* A
Gate Trigger Current (2)
Anode Vo ltag e=6.0 Vdc , RL=100ΩMax : 200
IGT Anode Voltage=6.0 Vdc, RL=100Ω,
TC=-65°C Max : 350 * µA
Gate Trigger Voltage
Anode Voltage=6.0 V, RL=100ΩMax : 0.8
Anode Voltage=6.0 V, RL=100Ω,
TC=-65°C Max : 1.0 *
VGT
VDRM = Rated, RL=100Ω, TJ=125°C Min : 0. 1 *
V
Holding Current
Anode Voltage=6.0 V Ma x : 2.0
Anode Voltage=6.0 V, TC=-65°C Max : 3.0 *
IH
Anode Voltage=6.0 V, TC=125°C Min : 0.15 *
mA
* JEDEC Registered Values
1) VRSM and VDRM can be applied for all types on a continuous dc basis without incurring damage.
2) RGK current is not included in measurement.
MECHANIC AL DATA CASE TO-39
DIMENSIONS
mm inches
A 6,25 0,24
B 13,59 0,53
C 9,24 0,36
D 8,24 0,32
E 0,78 0,03
F 1,05 0,041
G 0,42 0,165
H 45°
L5,10,2
Pin 1 : Cathode
Pin 2 : Gate
Pin 3 : Anode
Information furnished is believed to be accurate and reliable. How ever, CS assumes no respons abili ty
for the consequences of use of such information nor for errors that could appear.
Data are subject to change without not ice.
