The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors DF40 Series Decrease in the board-occupied area Smaller width DF40 5.0mm 3.38mm Other HRS connector 18.6mm Features 1. Higher density of the board-mounted components High contact reliability - Effective connection wipe of 0.45 mm Extremely small board mounting pattern and low abovethe-board profile makes the connectors ideally suited for small device applications. Shock-absorbing rib Header Despite connectors small size and low profile the contacts provide strong contact forces and long contact wipe (0.45 mm), guaranteeing reliable electrical and mechanical performance. 1.5mm 2. High contact reliability 0.45mm 3. Large self-alignment distance The connectors will self-align within 0.33 mm. 4. Confirmation of the fully mated condition Positive "click" sensation confirms correct insertion and connection of all contacts. Interlock indentations Receptacle (for 20 to 50 positions) 5. Built-in shock absorbing feature The protrusions and indents in the insulator bodies protect the connectors from failures when exposed to sudden impact. Contact area protection 6. Solder wicking prevention Nickel-plated barriers provide protection against solder wicking into the contact areas. Contact areas 7. Contact area protection External walls protect the exposed contact areas from intrusion of flux or foreign particles. Header Flux 8. RoHS compliant Foreign particles All components and materials comply with the requirements of the EU Directive 2002/95/EC. Applications Cellular phones, Digital Video Cameras, Digital Still Cameras, portable devices and other small applications requiring reliable board-to-board or FPC-to-board connections. Contact area Receptacle Foreign particles A253 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will bePitch discontinued soon. above Please check products status on the Hirose website RoHS search atConnectors www.hirose-connectors.com, or contact your Hirose sales representative. DF40 Series0.4 mm Contact 1.5 mm thetheboard Board-to-Board /Board-to-FPC Product Specifications Ratings Current rating 0.3A Operation temperature range -35c to +85c (Note 1) Storage temperature range -10c to +60c (Note 2) Voltage rating 30V AC, DC Operation humidity range Storage humidity range Item RH 20% to 80% Specification RH 40% to 70% (Note 2) Conditions 1. Insulation resistance 50 Mo min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown. 100V AC / one minute 3. Contact resistance 90 mo max. 1mA, 20mV AC, 1 kHz 4. Vibration No electrical discontinuity of 1 s or more. Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 2 hours, 3 axis 5. Humidity Contact resistance: 90 mo max. IInsulation resistance: 25 Mo min. 96 hours at +402c and humidity of 90% to 95%. 6. Temperature cycle Contact resistance: 90 m o max. Insulation resistance: 50 Mo min. Temperature: -55/+5c to 35c/+85c/+5c to +35c Time: 30/10/30/10 (Minutes) 5 cycles 7. Durability (insertion/withdrawal) Contact resistance: 90 mo max. 30 cycles 8. Resistance to soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 350c for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials Product Part Insulator Contacts Receptacles Headers Material LCP Phosphor bronze Finish Color : Black Gold plated Ordering information Receptacles and Headers DF40 C - * DS - 0.4 1 2 3 4 1 Series name: DF40 2 Configuration C: Without metal fittings, without bosses 3 Number of positions: 10, 20, 24, 30, 40, 50, 60, 80 100 4 Connector type DS: Receptacle DP: Header A254 V (**) 6 7 5 5 Contact pitch: 0.4 mm 6 Terminal type V: SMT vertical mount 7 Packaging (51): Embossed tape packaging (5,000 pieces per reel) Remarks UL94V-0 ------------- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued Please checkmm the products status on the1.5 Hirose website RoHS the search at www.hirose-connectors.com, or contact your Hirose sales representative. DF40soon. Series0.4 Contact Pitch mm above board Board-to-Board /Board-to-FPC Connectors Receptacles A0.2 B0.08 P=0.40.05 Note 2 3.380.2 2.880.2 HRS logo Pick-and-place area : C0.2 1.450.2 0.120.02 Cavity identification BRecommended PCB mounting pattern B0.02 Ill.1 P=0.40.02 1.5MAX 0 2.38 -0.05 3.78 +0.05 0 YES Note 3 Conductive traces Ill.2 0.20.02 NO Conductive traces [Specification number] (51): Embossed tape packaging (5,000 pieces per reel) Unit: mm Part number CL No. Number of contacts A B C DF40C- 10DS-0.4V(51) ---------- 10 4.6 1.6 1.0 DF40C- 20DS-0.4V(51) 684-4005-9-51 20 6.6 3.6 1.0 DF40C- 24DS-0.4V(51) 684-4006-1-51 24 7.4 4.4 1.2 DF40C- 30DS-0.4V(51) 684-4007-4-51 30 8.6 5.6 1.5 DF40C- 40DS-0.4V(51) 684-4008-7-51 40 10.6 7.6 3.2 DF40C- 50DS-0.4V(51) 684-4009-0-51 50 12.6 9.6 3.2 DF40C- 60DS-0.4V(51) 684-4004-6-51 60 14.6 11.6 3.2 DF40C- 80DS-0.4V(51) 684-4002-0-51 80 18.6 15.6 3.2 DF40C-100DS-0.4V(51) 684-4033-4-51 100 22.6 19.6 3.2 RoHS YES Note 1: Order by number of reels. Note 2: Connectors with 60 or 100 contacts may have several recessed areas in this location. Pick-and-place operation will NOT be affected. Note 3: No conductive traces through the areas indicated by . Refer to Ill.1 and Ill.2. for specific restrictions and exception to the above requirement. Note 4: This connector is NOT polarized. A255 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will bePitch discontinued soon. above Please check products status on the Hirose website RoHS search atConnectors www.hirose-connectors.com, or contact your Hirose sales representative. DF40 Series0.4 mm Contact 1.5 mm thetheboard Board-to-Board /Board-to-FPC Header A0.2 B0.08 P=0.40.05 2.970.2 1.850.2 HRS logo 0.150.02 Pick-and-place area : C0.2 1.140.2 Cavity identification BRecommended PCB mounting pattern B0.02 0.650.02 0.30.02 0 2.05 -0.05 3.37 +0.05 0 P=0.40.02 Note 3 0.230.02 0.350.02 [Specification number] (51): Embossed tape packaging (5,000 pieces per reel) Unit: mm Part number CL No. Number of contacts A B C DF40C- 10DP-0.4V(51) 684-4035-0-51 10 3.52 1.6 1.0 DF40C- 20DP-0.4V(51) 684-4010-9-51 20 5.52 3.6 1.0 DF40C- 24DP-0.4V(51) 684-4011-1-51 24 6.32 4.4 1.2 DF40C- 30DP-0.4V(51) 684-4012-4-51 30 7.52 5.6 1.5 DF40C- 40DP-0.4V(51) 684-4013-7-51 40 9.52 7.6 3.2 DF40C- 50DP-0.4V(51) 684-4014-0-51 50 11.52 9.6 3.2 DF40C- 60DP-0.4V(51) 684-4003-3-51 60 13.52 11.6 3.2 DF40C- 80DP-0.4V(51) 684-4001-8-51 80 17.52 15.6 3.2 DF40C-100DP-0.4V(51) 684-4032-1-51 100 21.52 19.6 3.2 RoHS YES Note 1: Order by number of reels. Note 2: 60 or 100 positions connectors will not have small interlock indentations in the contact areas. Note 3: The contacts in each of the 4 corners serve as metal solder brackets only and should NOT be used for current carrying. Note 4: Location of the HRS logo and cavity identification mark may differ from what is shown. Note 5: This connector is not polarized. A256 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued Please checkmm the products status on the1.5 Hirose website RoHS the search at www.hirose-connectors.com, or contact your Hirose sales representative. DF40soon. Series0.4 Contact Pitch mm above board Board-to-Board /Board-to-FPC Connectors Packaging Specification .5 O1 E 40.1 .1 +0 0 1.750.1 Embossed Carrier Tape Dimensions - Receptacle E-E B0.3 A0.1 20.1 80.1 F E Unreeling direction 0.30.1 1.650.15 F F-F (4.6) Reel Dimensions Part number label 0.2 Unreeling direction O801 O3802 0 12 12 0 O1 0.8 3 1 O2 20.5 C0.5 D1 Unit: mm Part Number A B C D DF40C- 10DS-0.4V(51) 12.0 5.5 13.5 17.5 DF40C- 20DS-0.4V(51) 16.0 7.5 17.5 21.5 DF40C- 24DS-0.4V(51) 16.0 7.5 17.5 21.5 DF40C- 30DS-0.4V(51) 24.0 11.5 25.5 29.5 DF40C- 40DS-0.4V(51) 24.0 11.5 25.5 29.5 DF40C- 50DS-0.4V(51) 24.0 11.5 25.5 29.5 DF40C- 60DS-0.4V(51) 24.0 11.5 25.5 29.5 DF40C- 80DS-0.4V(51) 32.0 14.2 33.5 37.5 DF40C-100DS-0.4V(51) 44.0 20.2 45.5 49.5 A257 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will bePitch discontinued soon. above Please check products status on the Hirose website RoHS search atConnectors www.hirose-connectors.com, or contact your Hirose sales representative. DF40 Series0.4 mm Contact 1.5 mm thetheboard Board-to-Board /Board-to-FPC .5 O1 E 40.1 20.1 E-E B0.3 A0.1 .1 +0 0 1.750.1 Embossed Carrier Tape Dimensions - Header 80.1 F E Unreeling direction 0.30.1 1.650.15 F F-F (4.6) Reel Dimensions Part number label O3802 12 0 O801 O1 3 0.2 Unreeling direction 12 0 0.8 1 O2 20.5 C0.5 D1 Unit: mm Part Number A258 A B C D DF40C-10DP-0.4V(51) 12.0 5.5 13.5 17.5 DF40C-20DP-0.4V(51) 16.0 7.5 17.5 21.5 DF40C-24DP-0.4V(51) 16.0 7.5 17.5 21.5 DF40C-30DP-0.4V(51) 16.0 7.5 17.5 21.5 DF40C-40DP-0.4V(51) 24.0 11.5 25.5 29.5 DF40C-50DP-0.4V(51) 24.0 11.5 25.5 29.5 DF40C-60DP-0.4V(51) 24.0 11.5 25.5 29.5 DF40C-80DP-0.4V(51) 32.0 14.2 33.5 37.5 DF40C-100DP-0.4V(51) 44.0 20.2 45.5 49.5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued Please checkmm the products status on the1.5 Hirose website RoHS the search at www.hirose-connectors.com, or contact your Hirose sales representative. DF40soon. Series0.4 Contact Pitch mm above board Board-to-Board /Board-to-FPC Connectors BUsage Recommendations 1.Recommended temperature profile Temperature (c) 250c 250c 220c 200c 60sec.max. 180c 150c 150c 90 to 120sec. 100c 50c Room temperature 0sec. 50sec. 100sec. 150sec. 200sec. 250sec. 300sec. (Time) Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. 2.Recommended manual soldering Manual soldering: 34010c for 3 seconds 3.Recommended screen thickness and Thickness: 0.12 mm open area ratio (Pattern area ratio) Open area ratio: 80% 4.Board warpage Maximum of 0.02 mm at the connector center, with both ends of the connector as reference points. 5.Cleaning conditions Refer to "Nylon Connector Use Handbook". 6.Precautions * Mating and un-mating of the connectors when not soldered on the boards is not recommended as this may cause deformation of the terminals, damage to the contacts or insulators. Mated connectors should not carry weight of the board by themselves. Provide some other support of the boards. When mating/un-mating do not twist or lift by the corners. Apply the forces evenly across the entire length and width of the connectors taking care NOT to damage or deform soldered terminations. Exercise extreme caution when mating/ un-mating when the connector is mounted on a nonrigid (flexible) substrate. Do NOT pull on the flexible substrate. Slight discoloration on the insulating materials will not affect form, fit or function of the connectors. A259 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will bePitch discontinued soon. above Please check products status on the Hirose website RoHS search atConnectors www.hirose-connectors.com, or contact your Hirose sales representative. DF40 Series0.4 mm Contact 1.5 mm thetheboard Board-to-Board /Board-to-FPC BHandling Precautions when mating the connectors DF40*-*DP-0.4V Header DF40*-*DS-0.4V Receptacle Keep the connectors parallel to each other when positioning Do not attempt to mate the connectors staring at one end or side. Press-down evenly until slight resistance is felt. Overcoming this slight resistance will complete the mating receptacle with the header. A definite "click" sensation will confirm the fully mated condition. A260 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued Please checkmm the products status on the1.5 Hirose website RoHS the search at www.hirose-connectors.com, or contact your Hirose sales representative. DF40soon. Series0.4 Contact Pitch mm above board Board-to-Board /Board-to-FPC Connectors BHandling Precautions when un-mating the connectors DF40*-*DS-0.4V Fully mated DF40*-*DP-0.4V Lift even one side, keeping both boards parallel to each other. When handling, circumstances prevent the connector from being kept level during the un-mating. One end may be lifted separate as shown. However, to utilize this procedure the connector must be mounted on a sufficiently rigid circuit board. Any deflection of the board during this operation may result in damage to the connectors or solder joints. Pitch Orientation Corner Orientation Do not attempt the start of the un-mating of the connectors from one side or corner. When un-mating is from the width orientation, as illustrated in the diagram to the left, connector could be damaged. Do not remove from the width orientation. Width Orientation A261 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will bePitch discontinued soon. above Please check products status on the Hirose website RoHS search atConnectors www.hirose-connectors.com, or contact your Hirose sales representative. DF40 Series0.4 mm Contact 1.5 mm thetheboard Board-to-Board /Board-to-FPC BHandling Precautions when un-mating the connectors FPC Receptacle Low rigidity FPC should not be used for mounting of the receptacle. Un-mating of the connectors when the receptacle is mounted on the extremely flexible FPC can result in solder joint failure or damage to the connector itself. Header It is highly recommended that the receptacle be mounted on the rigid PCB and the header on the FPC. Header Contact HRS when specific application requires mounting of the receptacle on the FPC. All published performance data is based on connectors mounted on rigid FPC and PCB. Receptacle Failure to exercise caution when un-mating connectors mounted on the non-rigid FPC may also result in connector breakage. A262