Model EN16
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345 Website: www.bitechnologies.com
February 1, 2007 page 1 of 3 BI technologies
16mm Rotary Encoder
2 Bits Gray Code
Incremental/Contacting Type
Metal Bushing/Plastic Shaft
RoHS Compliant
MODEL STYLES
MODEL STYLESMODEL STYLES
MODEL STYLES
Top Adjust, PCB pins EN16-H
Side Adjust, PCB pins EN16-V
ELECTRICAL
ELECTRICALELECTRICAL
ELECTRICAL1
11
1
Pulses ( Per Revolution ) 12 & 24
Closed Circuit Resistance, Ohms 3 Ohms, max.
Contact Rating 0.5mA/ 5Vdc
Operating Current, Maximum 0.5mA
Dielectric Strength 50Vac/ 1mA, I minute
Insulation Resistance, Minimum 10M ohms at 50Vdc/ 1mA
Sliding Noise ( at 60 RPM ) 2.0ms max.
Contact Bounce ( at 15 RPM) 5.0ms max.
Operating speed ( RPM ) 100 RPM max.
Actual Electrical Travel, Nominal Continuous
MECHANICAL
MECHANICALMECHANICAL
MECHANICAL
Total Mechanical Travel Continuous
Detents (per Revolution) 0,12, 24
Rotational Torque of Detent, Maximum 2.5 oz-in
ENVIRONMENTAL
ENVIRONMENTAL ENVIRONMENTAL
ENVIRONMENTAL
Operating Temperature Range -30°C to +85°C
Rotational Life 30,000 cycles
1 Specifications subject to change without notice.
Model EN16
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345 Website: www.bitechnologies.com
February 1, 2007 page 2 of 3 BI technologies
ORDERING INFORMATION
ORDERING INFORMATIONORDERING INFORMATION
ORDERING INFORMATION2
22
2
Shaft Length options
2 Contact our customer service for custom designs and features.
CIRCUIT DIAGRAM
CIRCUIT DIAGRAMCIRCUIT DIAGRAM
CIRCUIT DIAGRAM
EN16
EN16 EN16
EN16
-
--
-
V 1 1 A
V 1 1 A V 1 1 A
V 1 1 A
F 20
F 20 F 20
F 20
Model Series
Style
Pulses:
1=12 Pulses
2=24 Pulses
Bushing Length (M)
A = 5mm
B = 7mm
Flatted Shaft
Detents :
0 = No Detent
1= 12 Detents ( for 12 pulses only)
2= 24 Detents ( for 24 pulses only)
Model EN16
BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345 Website: www.bitechnologies.com
February 1, 2007 page 3 of 3 BI technologies
OUTLINE DRAWING
OUTLINE DRAWINGOUTLINE DRAWING
OUTLINE DRAWING
EN16-H (Top Adjust, PCB pins)
EN16-V (Side Adjust, PCB pins)