1power.pulseelectronics.com SPM2007_61 (02/19) http://www.power.pulseelectronics.com/contact
SMT Gate Drive Transformers
>1500VDC Basic and Functional Insulation
>1500VDC isolation (380Vrms continuous)
Basic insulation (1.4mm creepage/
clearance) and functional available
Operating frequency: 50kHz and up
Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C5
Part Number3,4 Turns
Ratio Pri-Sec
Isolation MAX1
V*μsec
Primary
Inductance
(μH MIN)
Leakage2
Inductance
(μH MAX)
DCR
Primary
(Ω MAX)
DCR
Secondary
(Ω MAX)
Package Size
(L x W x H)
(mm MAX)
Commerical Automotive7
Functional Insulation
PE-68386NL PM2210NL 1:1 1500 Vdc 9.7 785 0.46 0.60 0.60 8.6 x 6.7 x 2.5
P0926NL - 1:1:1 1500 Vdc 23.8 300 0.50 2.00 2.00 8.0 x 6.6 x 5.3
P0544NL - 1:1:1 1500 Vdc 45.1 3300 0.80 1.25 1.25 9.0 x 8.6 x 7.6
PA0264NL - 1:1:1 1000 Vrms 12.7 1140 0.65 0.75 0.75 8.6 x 6.7 x 3.6
PA1323NL - 1:1 1500 Vrms 21.7 600 2.0 1.25 1.25 9.5 x 7.1 x 5.3
Basic Insulation (1.4mm creepage and clearance between Primary and Secondary)
PA0173NL - 1:1:1 1500 Vrms 17.2 980 0.75 0.62 0.88 11.8 x 8.8 x 4.0
PA0185NL - 1:1 1500 Vrms 17.2 980 0.75 0.88 0.62 11.8 x 8.8 x 4.0
PA0184NL - 1:1 1500 Vrms 27.2 1200 0.50 0.91 0.91 9.0 x 8.6 x 7.6
PA0297NL - 2:1:1 1500 Vrms 27.2 1200 0.60 0.91 0.46 9.0 x 8.6 x 7.6
PA2777NL - 1:1 1500 Vrms 9.3 335.2 0.36 0.70 0.70 7.1 x 6.1 x 5.5
PA0510NL - 2.5:1:1 1500 Vrms 27.2 1200 0.68 0.91 0.380 9.0 x 8.6 x 7.6
PA3493NL - 1.25:1 1650 Vrms 23 656 1.3 1.03 0.85 10.9 x 9.7 x 2.7
1. The Maximum volt-μsec rating limits the peak flux density to 2200 Gauss when used
in a unipolar drive application. For bi-polar drive applications, a maximum volt-sec of
two times this rating is acceptable (ie: 2* (volt*μsec rating) = (voltage applied to the
primary) * dutycycle / Frequency = V * alpha / Freq_Hz = V * μsec
2. Leakage inductance is measured at primary terminals with all secondaries shorted.
3. Optional Tape & Reel packaging can be ordered by adding a “T” sux to the part
number (i.e. P0544NL becomes P0544NLT). Pulse complies to industry standard tape
and reel specification EIA481.
4. The “NL” sux indicates an RoHS-compliant part number.
5. The temperature of the component (ambient plus temperature rise) must be within
the stated operating temperature range.
6. Continuous isolation voltage confirmed by 125°C/1000hrs accelerated aging with the
bias voltage applied between primary and secondary windings.
7. The PM2210NL part numbers are AEC-Q200 and IATF16949 certified. The mechanical
dimensions are 100% tested in production but do not necessarily meet aproduct
capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP.
Notes:
2power.pulseelectronics.com SPM2007_61 (02/19) http://www.power.pulseelectronics.com/contact
SMT Gate Drive Transformers
>1500VDC Basic and Functional Insulation
Mechanicals Schematics
6
1
34
PA0264NL
NL
SUGGESTED PAD LAYOUT
P0926NL
PA0264NL
PE-68386NL
Mechanicals Schematics
Mechanicals Schematics
Weight ...........................0.28grams
Tape & Reel .......................1500/reel
Tube .....................................60/tube
Weight ...........................0.28grams
Tape & Reel .......................1500/reel
Tube ......................................60/tube
Weight ...........................0.48grams
Tape & Reel .......................1000/reel
Tray .....................................120/tray
Dimensions: .Inches
Unless otherwise specified,
all tolerances are: ±..010
mm
0,25
Dimensions: .Inches
Unless otherwise specified,
all tolerances are: ±..010
mm
0,25
Dimensions: .Inches
Unless otherwise specified,
all tolerances are: ±..010
mm
0,25
3power.pulseelectronics.com SPM2007_61 (02/19) http://www.power.pulseelectronics.com/contact
SMT Gate Drive Transformers
>1500VDC Basic and Functional Insulation
Mechanicals Schematics
(continued)
P0544NL
P0544NL
PA0297NL, PA0510NL, PA0184NL
PA0297NL / PA0510NL
PA0184NL
* for PA0184 the pads for pins 3 and 6 in the suggested pad layout should not be
used in the layout
Mechanicals Schematics
Weight ...........................0.60grams
Tape & Reel ........................400/reel
Tube ......................................50/tube
Weight ...........................0.60grams
Tape & Reel ........................400/reel
Tube ......................................50/tube
Dimensions: .Inches
Unless otherwise specified,
all tolerances are: ±..010
mm
0,25
Dimensions: .Inches
Unless otherwise specified,
all tolerances are: ±..010
mm
0,25
4power.pulseelectronics.com SPM2007_61 (02/19) http://www.power.pulseelectronics.com/contact
SMT Gate Drive Transformers
>1500VDC Basic and Functional Insulation
PA3493NL



0$;
0$;


0$;

685)$&(6
DATE CODE
CTRY OF MFG
_ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _
mm
mm mm
mm
mm
mm
mm
mm
mm
SUGGESTED FOOTPRINT
PA3493NL
1
3
6
4
6
1
34
PA0173NL, PA0185NL
PART NUMBER
SUGGESTED PAD LAYOUT
PA0185NL
PA0173NL
Mechanicals Schematics
(continued)
Mechanicals Schematics
Weight ...........................0.48grams
Tape & Reel ........................900/reel
Tube ......................................60/tube
Weight ............................0.31grams
Tape & Reel .......................1250/reel
Tube ......................................50/tube
Dimensions: .Inches
Unless otherwise specified,
all tolerances are: ±..010
mm
0,25
Dimensions: mm
Unless otherwise specified,
all tolerances are: ±0.25
5power.pulseelectronics.com SPM2007_61 (02/19) http://www.power.pulseelectronics.com/contact
SMT Gate Drive Transformers
>1500VDC Basic and Functional Insulation
6.3
8X 0.76
4.45
3X 1.27
8X 1.52
6.22
6.3mm MAX
4.06±.25mm
7.4mm MAX .15
5.9mm MAX
0.127
8X 0.89mm
8X 0.508mm
3X 1.27mm
SUGGESTED LAND PATTERN
TOP VIEW
BOTTOM VIEW
FINAL OUTLINE
1.27mm
1.27mm
5.08mm
2.54mm
9.52mm
7.11mm
MAX
5.33mm MAX
0.127
.609X.254
(4X)2.54mm REF
9.52mm MAX
5.08mm
REF
6
1
34
PA2777NL
PA1323NL
Mechanicals (continued) Schematics
Mechanicals Schematics
Dimensions: mm
Unless otherwise specified,
all tolerances are: ±0.25
Weight ..............................0.4grams
Tape & Reel ........................700/reel
Tray ....................................225/tray
Weight ...........................0.32grams
Tape & Reel ........................850/reel
Tube .....................................120/tube
Dimensions: mm
Unless otherwise specified,
all tolerances are: ±0.25
6power.pulseelectronics.com SPM2007_61 (02/19) http://www.power.pulseelectronics.com/contact
SMT Gate Drive Transformers
>1500VDC Basic and Functional Insulation
Pulse Worldwide Headquarters
15255 Innovation Drive Ste 100
San Diego, CA 92128
U.S.A.
Tel: 858 674 8100
Fax: 858 674 8262
Pulse Europe
Pulse Electronics GmbH
Am Rottland 12
58540 Meinerzhagen
Germany
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Pulse China Headquarters
Pulse Electronics (ShenZhen) CO., LTD
D708, Shenzhen Academy of
Aerospace Technology,
The 10th Keji South Road,
Nanshan District, Shenzhen,
P.R. China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse South Asia
3 Fraser Street 0428
DUO Tower
Singapore 189352
Tel: 65 6287 8998
Fax: 65 6280 0080
Pulse North Asia
1F., No.111 Xiyuan Road
Zhongli District
Taoyuan City 32057
Taiwan (R.O.C)
Tel: 886 3 4356768
Fax: 886 3 4356820
For More Information
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned
herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved.
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
SURFACE MOUNTING TYPE, REEL/TAPE LIST
PART NUMBER REEL SIZE (mm) TAPE SIZE (mm) QTY
A G P1W K0PCS/REEL
PE-68386NLT/PM2201NLT Ø330 16.4 12 16 3.05 1500
P0926NLT Ø330 16.4 12 16 5.33 1000
P0544NLT Ø330 24.4 16 24 8.13 400
PA0264NLT Ø330 24.4 16 24 3.81 800
PA1323NLT Ø330 16.4 12 16 5.55 870
PA0173NLT Ø330 24.4 16 24 4.32 900
PA0185NLT Ø330 24.4 16 24 4.32 900
PA0184NLT Ø330 24.4 16 24 8.13 400
PA0297NLT Ø330 24.4 16 24 8.13 400
PA2777NLT Ø330 16.4 12 16 6.10 850
PA0510NLT Ø330 24.4 16 24 8.13 400
PA3493NLT Ø330 24.4 16 24 2.80 1250
TAPE & REEL INFO
USER DIRECTION OF FEED
G
K
0
P
1
WA