Only One Name Means ProTek’Tion™
The 30KPA Series, are discrete 30,000 Wa, silicon transient voltage suppressors (TVS) designed for use in applicaons
where large voltage transients can permanently damage voltage sensive components and equipment.
The 30KPA series is available in voltages ranging from 30V to 360V with 5 percent and 10 percent tolerances. Both
tolerances are referenced to the power supply output or operang voltage level. This series is compable with IEC
61000-4-5 (Surge) requirements.
• Compable with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(Line-
Ground), L4(Line-Line) & L1 (Power)
• 30,000 Was Peak Pulse Power per Line (tp = 10/1000µs)
• Unidireconal and Bidireconal Conguraons
• Easy Mounng to Printed Circuit Board
• tClamping (0V to VBR Min.) < 1 x 10-12 seconds theorecal
• Available in Mulple Voltages Ranging From 30V to 360V
• RoHS Complaint (Exempon #7)
• Molded Case
• Approximate Weight: 5 grams
• Lead-Free Pure-Tin Plang (Annealed)
• Solder Reow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• Flammability Rang UL 94V-0
• Relay Drives
• Motor (Start/Stop) Back EMF Protecon
• Module Lightning Protecon
• Secondary Lightning Protecon for AC/DC
UNIDIRECTIONAL BIDIRECTIONAL
Only One Name Means ProTek’Tion™
Peak Pulse Power (tp = 10/1000µs) - See Figure 1 PPP 30,000 Was
Forward Surge Rang - 1/120 seconds - See Note 2 IF200 Amps
Steady State Power Dissipaon PP8.0 Was
Storage Temperature TSTG -55 to 150 °C
Operang Temperature TL-55 to 150 °C
30KPA30A 30.0 33.3 50 5000 55.2V @ 543.0A 34
30KPA33A 33.0 36.7 50 5000 58.6V @ 512.0A 39
30KPA36A 36.0 40.0 50 2000 61.8V @ 485.0A 41
30KPA43A 43.0 47.8 50 1000 73.0V @ 410.0A 50
30KPA48A 48.0 53.3 5 250 77.4V @ 388.0A 56
30KPA58A 58.0 64.4 5 20 92.4V @ 325.0A 68
30KPA64A 64.0 71.1 5 10 104.0V @ 294.0A 76
30KPA70A 70.0 77.8 5 2 109.0V @ 274.0A 83
30KPA75A 75.0 83.3 5 2 119.4V @ 251.0A 89
30KPA85A 85.0 94.4 5 2 139.0V @ 216.0A 105
30KPA90A 90.0 100.0 5 2 147.0V @ 206.0A 109
30KPA100 100.0 111.0 5 2 179.0V @ 168.0A 134
30KPA100A 100.0 111.0 5 2 162.0V @ 186.0A 121
30KPA130A 130.0 144.0 5 2 209.0V @ 142.0A 157
30KPA160A 160.0 178.0 5 2 252.6V @ 119.0A 195
30KPA170A 170.0 189.0 5 2 274.0V @ 110.0A 207
30KPA180A 180.0 200.0 5 2 291.0V @ 104.0A 230
30KPA200A 200.0 222.0 5 2 320.0V @ 94.0A 250
30KPA220A 220.0 245.0 5 2 356.0V @ 84.0A 269
30KPA250A 250.0 277.0 5 2 404.0V @ 74.0A 314
30KPA260A 260.0 289.0 5 2 416.0V @ 72.0A 317
30KPA280A 280.0 311.0 5 2 464.0V @ 65.0A 342
30KPA300A 300.0 334.0 5 2 484.0V @ 62.0A 368
30KPA320A 320.0 356.0 5 2 530.0V @ 57.0A 370
30KPA360A 360.0 400.0 5 2 640.0V @ 55.0A 380
1. Part numbers shown are unidireconal devices. Add a “CA” sux to specify bidireconal devices, such as 30KPA30.
2. VF = 15 Volts @ 200A, 8.3ms(1/2 Sine Wave) - Unidireconal devices only.
Only One Name Means ProTek’Tion™
30kW, 10/1000µs
Waveform
Peak Pulse Power
10/1000µs
tf
Peak Value IPP
TEST
WAVEFORM
PARAMETERS
tf = 10µs
td = 1000µs
td = t/(IPP/2)
e-t
Only One Name Means ProTek’Tion™
30KPAxx -LF n/a n/a n/a n/a
30KPAxxA -LF n/a n/a n/a n/a
30KPAxxCA -LF n/a n/a n/a n/a
1. Marking on Part - logo, part number, date code and posive terminal marked with
band(unidireconal only).
30KPAxxx
yyww
P
Package outline per document number 06028.R2 9/09.
A 24.5 - 1.00 -
B 8.60 9.10 0.34 0.36
C 24.5 - 1.00 -
D 1.20 DIA. 1.30 DIA. 0.048 DIA. 0.052 DIA.
E 8.60 9.10 0.34 0.36
1. Dimensions are exclusive of mold ash and metal burrs.
E
A
B
C
D
Only One Name Means ProTek’Tion™
COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteriscs described herein without noce.
DESIGN CHANGES: ProTek reserves the right to disconnue product lines without noce and that the nal judgement concerning selecon and specicaons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecon or specicaons of such products. ProTek makes no warranty, representaon or guarantee regarding the suitability of
its products for any parcular purpose, nor does ProTek assume any liability arising out of the applicaon or use of any product or circuit and specically disclaims any and all liability without limitaon special,
consequenal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wrien consent from the factory.
In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company oers a product line of overvoltage pro-
tecon and overcurrent protecon components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering
diode TVS array and electronics SMD chip fuses. These components deliver circuit protecon in electronic systems from numerous overvoltage and
overcurrent events. They include lightning; electrostac discharge (ESD); nuclear electromagnec pulses (NEMP); inducve switching; and electro-
magnec interference (EMI) / radio frequency interference (RFI). ProTek Devices also oers high performance interface and linear products. They
include analog switches; mulplexers; LED drivers; LED wafer die for ESD protecon; audio control ICs; RF and related high frequency products.
2929 South Fair Lane
Tempe, Arizona 85282
USA
General: 602-431-8101
Sales: & Markeng: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
General: 602-431-2288
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
www.protekdevices.com
