(10A, 15A, 20A type) High capacity SSR, both tab and screw terminals available AQ-R (30A, 40A type) AQ-R RELAYS FEATURES APPLICATIONS 1. Two types of terminal shape: Plug-in terminal and Screw terminal (30 A, 40 A is screw terminal types only) 2. Flat type of SSR possible by aluminium printed circuit board 3. High dielectric strength of 1,500 V between input and output. 4,000 V available for 10A, 15A, 20A devices. 4. Heat sink and DIN mounting rail and terminal cover are available as accessories 1. Molding machine (heater control) 2. Temperature controlled bath (heater control) 3. Printing machine (heater control) 4. Machine tool (motor control) Compliance with RoHS Directive ORDERING INFORMATION AQR AQR Solid state Relay Load current 10 A 15 A 20 A 30 A 40 A Load voltage 1: 75 to 125 V AC 2: 75 to 250 V AC Terminal shape Nil: Plug-in terminal S: Screw terminal Type Z: Zero-cross type (1,500 V) ZV: Zero-cross type (4,000 V) Input voltage 4/6 V DC 10/18 V DC 18/28 V DC All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AQ-R TYPES 1. Tab terminal type Type Load current Load voltage 75 to 125V AC 10 A 75 to 250V AC 75 to 125 V AC Zero-cross 15 A 75 to 250 V AC 75 to 125 V AC 20 A 75 to 250 V AC Input voltage 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC Standard (1,500V AC) Part No. AQR10A1-Z4/6VDC AQR10A1-Z10/18VDC AQR10A1-Z18/28VDC AQR10A2-Z4/6VDC AQR10A2-Z10/18VDC AQR10A2-Z18/28VDC AQR15A1-Z4/6VDC AQR15A1-Z10/18VDC AQR15A1-Z18/28VDC AQR15A2-Z4/6VDC AQR15A2-Z10/18VDC AQR15A2-Z18/28VDC AQR20A1-Z4/6VDC AQR20A1-Z10/18VDC AQR20A1-Z18/28VDC AQR20A2-Z4/6VDC AQR20A2-Z10/18VDC AQR20A2-Z18/28VDC Reinforced (4,000V AC) Part No. -- -- -- AQR10A2-ZV4/6VDC AQR10A2-ZV10/18VDC AQR10A2-ZV18/28VDC -- -- -- AQR15A2-ZV4/6VDC AQR15A2-ZV10/18VDC AQR15A2-ZV18/28VDC -- -- -- AQR20A2-ZV4/6VDC AQR20A2-ZV10/18VDC AQR20A2-ZV18/28VDC Standard (1,500V AC) Part No. AQR10A1-S-Z4/6VDC AQR10A1-S-Z10/18VDC AQR10A1-S-Z18/28VDC AQR10A2-S-Z4/6VDC AQR10A2-S-Z10/18VDC AQR10A2-S-Z18/28VDC AQR15A1-S-Z4/6VDC AQR15A1-S-Z10/18VDC AQR15A1-S-Z18/28VDC AQR15A2-S-Z4/6VDC AQR15A2-S-Z10/18VDC AQR15A2-S-Z18/28VDC AQR20A1-S-Z4/6VDC AQR20A1-S-Z10/18VDC AQR20A1-S-Z18/28VDC AQR20A2-S-Z4/6VDC AQR20A2-S-Z10/18VDC AQR20A2-S-Z18/28VDC AQR30A2-S-Z4/6VDC AQR30A2-S-Z10/18VDC AQR30A2-S-Z18/28VDC AQR40A2-S-Z4/6VDC AQR40A2-S-Z10/18VDC AQR40A2-S-Z18/28VDC Reinforced (4,000V AC) Part No. -- -- -- AQR10A2-S-ZV4/6VDC AQR10A2-S-ZV10/18VDC AQR10A2-S-ZV18/28VDC -- -- -- AQR15A2-S-ZV4/6VDC AQR15A2-S-ZV10/18VDC AQR15A2-S-ZV18/28VDC -- -- -- AQR20A2-S-ZV4/6VDC AQR20A2-S-ZV10/18VDC AQR20A2-S-ZV18/28VDC -- -- -- -- -- -- Standard packing: Carton 10 pcs., Case: 100 pcs. 2. Screw-terminal type Type Load current Load voltage 75 to 125 V AC 10 A 75 to 250 V AC 75 to 125 V AC 15 A 75 to 250 V AC Zero-cross 75 to 125 V AC 20 A 75 to 250 V AC 30 A 75 to 250 V AC 40 A 75 to 250 V AC Input voltage 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC 4 to 6V DC 10 to 18V DC 18 to 28V DC Standard packing: Carton 10 pcs., Case: 100 pcs. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. AQ-R SPECIFICATIONS 1. Ratings (at 20C 68F, Input ripple: 1% or less) 1) 10 A type Part No. AQR10A1-Z4/ 6VDC AQR10A1-S-Z4/ 6VDC AQR10A1-Z10/ 18VDC AQR10A1-S-Z10/ 18VDC AQR10A1-Z18/ 28VDC AQR10A1-S-Z18/ 28VDC AQR10A2-Z4/ 6VDC AQR10A2-ZV4/ 6VDC AQR10A2-S-Z4/ 6VDC AQR10A2-S-ZV4/ 6VDC 4 to 6V DC Approx. 0.26 k 10 to 18V DC Approx. 0.86 k 18 to 28V DC Approx. 1.36 k 4 to 6V DC Approx. 0.26 k Items Input side Input voltage Input impedance Drop-out voltage, min. Load side 10 to 18V DC Approx. 0.86 k AQR10A2-Z18/ 28VDC AQR10A2-ZV18/ 28VDC AQR10A2-S-Z18/ 28VDC AQR10A2-SZV18/28VDC 18 to 28V DC Approx. 1.36 k Remarks *1 1V Max. load current Load voltage Frequency Repetitive peak voltage Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop AQR10A2-Z10/ 18VDC AQR10A2-ZV10/ 18VDC AQR10A2-S-Z10/ 18VDC AQR10A2-SZV10/18VDC Ta = Max. 40C 104F 10 A*2 75 to 125 V AC 75 to 250 V AC 45 to 65 Hz 400 V 600 V In one cycle at 60 Hz 100 A*3 2.5 mA (when 100 V AC applied) 5 mA (when 200 V AC applied) at max. carrying current 1.6 V Min. load current OFF-state dV/dt at 60 Hz 100 mA*4 100 V/s 2) 15 A type Part No. AQR15A1-Z4/ 6VDC AQR15A1-S-Z4/ 6VDC AQR15A1-Z10/ 18VDC AQR15A1-S-Z10/ 18VDC AQR15A1-Z18/ 28VDC AQR15A1-S-Z18/ 28VDC AQR15A2-Z4/ 6VDC AQR15A2-ZV4/ 6VDC AQR15A2-S-Z4/ 6VDC AQR15A2-S-ZV4/ 6VDC 4 to 6V DC Approx. 0.26 k 10 to 18V DC Approx. 0.86 k 18 to 28V DC Approx. 1.36 k 4 to 6V DC Approx. 0.26 k Items Input side Input voltage Input impedance Drop-out voltage, min. Load side Min. load current OFF-state dV/dt Notes: *1. *2. *3. *4. 10 to 18V DC Approx. 0.86 k AQR15A2-Z18/ 28VDC AQR15A2-ZV18/ 28VDC AQR15A2-S-Z18/ 28VDC AQR15A2-SZV18/28VDC 18 to 28V DC Approx. 1.36 k Remarks *1 1V Max. load current Load voltage Frequency Repetitive peak voltage Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop AQR15A2-Z10/ 18VDC AQR15A2-ZV10/ 18VDC AQR15A2-S-Z10/ 18VDC AQR15A2-SZV10/18VDC Ta = Max. 40C 104F 15 A*2 75 to 125 V AC 75 to 250 V AC 45 to 65 Hz 400 V 600 V In one cycle at 60 Hz 150 A*3 2.5 mA (when 100 V AC applied) 5 mA (when 200 V AC applied) 1.6 V 100 mA*4 100 V/s Refer to REFERENCE DATA "3. Input current vs. input voltage". Refer to REFERENCE DATA "1. Load current vs. ambient temperature". Refer to REFERENCE DATA "2. Non-repetitive surge current vs. carrying time". When the load current is less than the rated minimum load current, please refer to "Cautions for Use of SSR". All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. at 60 Hz at max. carrying current AQ-R 3) 20 A type Part No. AQR20A1-Z4/ 6VDC AQR20A1-S-Z4/ 6VDC AQR20A1-Z10/ 18VDC AQR20A1-S-Z10/ 18VDC AQR20A1-Z18/ 28VDC AQR20A1-S-Z18/ 28VDC AQR20A2-Z4/ 6VDC AQR20A2-ZV4/ 6VDC AQR20A2-S-Z4/ 6VDC AQR20A2-S-ZV4/ 6VDC 4 to 6V DC Approx. 0.26 k 10 to 18V DC Approx. 0.86 k 18 to 28V DC Approx. 1.36 k 4 to 6V DC Approx. 0.26 k Items Input side Input voltage Input impedance Drop-out voltage, min. 10 to 18V DC Approx. 0.86 k AQR20A2-Z18/ 28VDC AQR20A2-ZV18/ 28VDC AQR20A2-S-Z18/ 28VDC AQR20A2-SZV18/28VDC 18 to 28V DC Approx. 1.36 k Remarks *1 1V Max. load current Load side AQR20A2-Z10/ 18VDC AQR20A2-ZV10/ 18VDC AQR20A2-S-Z10/ 18VDC AQR20A2-SZV10/18VDC Ta = Max. 40C 104F 20 A*2 Load voltage Frequency Repetitive peak voltage Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop 75 to 125 V AC 75 to 250 V AC 45 to 65 Hz 400 V 600 V In one cycle at 60 Hz 200 A*3 2.5 mA (when 100 V AC applied) 5 mA (when 200 V AC applied) at 60 Hz at max. carrying current 1.6 V Min. load current OFF-state dV/dt 100 mA*4 100 V/s 4) 30 A type and 40 A type Part No. Items Input side Input voltage Input impedance Drop-out voltage, min. AQR30A2-S-Z4/ 6VDC 4 to 6V DC Approx. 0.26 k Max. load current Load side Load voltage Frequency Non-repetitive surge current Max. "OFF-state" leakage current Max. "ON-state" voltage drop AQR30A2-S-Z10/ 18VDC 10 to 18V DC Approx. 0.86 k AQR30A2-S-Z18/ 28VDC 18 to 28V DC Approx. 1.36 k AQR40A2-S-Z10/ 18VDC 10 to 18V DC Approx. 0.86 k AQR40A2-S-Z18/ 28VDC 18 to 28V DC Approx. 1.36 k Remarks *1 1V 30 A*2 40 A*2 Ta = Max. 40C 104F 400 A*3 In one cycle at 60 Hz 75 to 250 V AC 45 to 65 Hz 300 A*3 5 mA (when 200 V AC applied) at 60 Hz at max. carrying current 1.6 V Min. load current Notes: *1. *2. *3. *4. AQR40A2-S-Z4/ 6VDC 4 to 6V DC Approx. 0.26 k 120 mA*4 Refer to REFERENCE DATA "3. Input current vs. input voltage". Refer to REFERENCE DATA "1. Load current vs. ambient temperature". Refer to REFERENCE DATA "2. Non-repetitive surge current vs. carrying time". When the load current is less than the rated minimum load current, please refer to "Cautions for Use of SSR". 2. Characteristics (at 20C 68F, Input ripple: 1% or less) Type Item Operate time, max. Release time, max. Insulation resistance, min., Initial Breakdown voltage Vibration resistance Functional Destructive Functional Destructive Ambient temperature Storage temperature Operational method Shock resistance Zero-cross type Standard type Reinforced type 1/2 cycle of voltage sine wave + 1 ms 1/2 cycle of voltage sine wave + 1 ms 100 M between input, output and case 1,500 V AC between input, output and case 4,000 V AC between input, output and case 10 to 55 Hz at double amplitude of 2 mm* 10 to 55 Hz at double amplitude of 2 mm* Min. 980 m/s2 {100 G} Min. 980 m/s2 {100 G} -20C to +80C -4F to +176F -25C to +85C -13F to +185F Zero-cross (Turn-ON and Turn-OFF) Note: *30A and 40A type is 10 to 55 Hz at double amplitude of 1.5 mm .059 inch. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. Remarks at 500V DC For 1 min. 1 hour for X, Y, Z axes 10 minutes for X, Y, Z axes 5 time each for X, Y, Z axes 4 time each for X, Y, Z axes AQ-R REFERENCE DATA 1. Load current vs. ambient temperature Use load current within range specified in the figure below. Tested condition: (2) 15 A type The graphs show the characteristics when the relay is mounted as shown in the right figure. Washers are added to lift the relay. 10 Load current, A Hole for radiation (40x35 mm) (1) 10 A type 3 mm or greater ;;;; ;;; ;;; ;; ;;;; ;;; ;; ;;; ; With external heat sink 1) (1) 10 A, 15A, 20 A type * A heat sink; optional heat sink (AQP-HSJ10A) or a 150x150x3.2 mm aluminum sheet (painted black) (2) 30 A, 40 A type Shown with standard heat sink (AQP-HS-30/ 40A) 2) If attached to a heat sink, use a heatconductive compound or similar coating to improve cooling. Without external heat sink If the mounting surface is not metallic and a heat sink is not used, expose the bottom surface and plate surface to improve heat dissipation. With external heat sink 8 6 Without external heat sink 4 2 0 -30 (3) 20 A type 0 20 40 60 80 Ambient temperature C (4) 30 A type 50 12 Without external heat sink Load current, A Load current, A With external heat sink 16 15 With external heat sink 16 12 Without external heat sink 40 Load current, A 20 20 With external heat sink 30 20 8 8 7 6 4 Without external heat sink 10 4 2 0 -30 0 2 0 -30 20 40 60 80 Ambient temperature, C (5) 40 A type 0 0 -30 20 40 60 80 Ambient temperature, C 2-1. Non-repetitive surge current vs. carrying time (10 A type) 0 20 40 60 80 Ambient temperature, C 2-2. Non-repetitive surge current vs. carrying time (15 A type) Load current, A 40 30 20 Without external heat sink 10 Non-repetitive surge current, A With external heat sink Non-repetitive surge current, A 50 220 200 180 160 140 120 100 80 60 220 200 180 160 140 120 100 40 0 0 20 40 60 80 Ambient temperature, C 2-3. Non-repetitive surge current vs. carrying time (20 A type) 20 1 2 0 3 4 5 7 10 20 30 40 50 70 100 No. of cycles at 60 Hz 2-4. Non-repetitive surge current vs. carrying time (30 A, 40 A type) 180 160 140 120 100 80 60 3 4 5 7 10 20 30 40 50 70 100 No. of cycles at 60 Hz 25 400 300 40A type 30A type 200 (4 to 6 V) 20 (10 to 18 V) 15 (18 to 28 V) 10 100 40 2 30 Input current, mA Non-repetitive surge current, A Non-repetitive surge current, A 200 1 3. Input current vs. input voltage (10 A, 15 A, 20 A, 30 A, 40 A common) 500 220 60 40 20 0 -30 80 5 20 0 1 2 3 4 5 7 10 20 30 40 50 70 100 No. of cycles at 60 Hz 0 1 2 3 4 5 7 10 20 304050 70 100 No. of cycles at 60 Hz All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 0 0 5 10 20 15 Input voltage, V 25 30 AQ-R DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac 1. Tab terminal CAD Data Schematic Input power source _ + 44.8 26 1.764 1.024 9 .354 Mounting hole 4 1 3 2 2-4.4 dia. 2-.173 dia. 47.6 1.874 59 2.323 Conform to AMP plug-in terminal #110 series receptacle Load Load power source Mounting dimensions (Bottom view) Conform to AMP plug-in terminal #250 series receptacle 47.60.1 1.874.004 2-4.3 dia. or M4 2-.169 dia. Max. 15 Max. .591 Max. 7.5 Max. .295 Max. 12.5 Max. .492 2. Screw terminal CAD Data Schematic 4-M4 screw terminal Input power source _ + 44.8 26 1.764 1.024 9 .354 1 3 2 Load Load power source Mounting dimensions (Bottom view) 2-4.4 dia. 2-.173 dia. 45.0 1.772 47.6 1.874 59 2.323 Mounting hole 4 47.60.1 1.874.004 2-4.3 dia. or M4 2-.169 dia. Max. 17 Max. .669 Max. 7.5 Max. .295 max. 12.5 Max. .492 ACCESSORIES Heat sink (For 10 A, 15A and 20 A) Mounting dimensions (Bottom view) CAD Data 4.4 .173 50 1.969 4.4 .173 R2.2 .087 2 .079 4-M4 or 4.4 dia. 1.5 .059 3-M4 54 2.126 90 3.543 33.3 1.311 11.1 .437 2 .079 AQP-HS-J10A 30 1.181 47.6 1.874 100 3.937 9 .354 24.5 .965 28.5 1.122 45 1.772 100 +0.5 -1.5 3.937 +.020 -.059 80 3.150 1.5 .059 General tolerance: 0.5 .020 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 900.1 3.543.004 500.2 1.969.008 AQ-R Heat sink (For 30 A, 40 A) CAD Data Mounting dimensions (Bottom view) 50 1.969 4.4 .173 4.4 .173 4-M4 or 4.4 dia. 11.1 .437 R 2.2 .087 3-M4 90 3.543 2 .079 80 3.150 33.3 100+0.5 -1.5 1.311 3.937+.020 900.1 -.0593.543.004 54 2.126 47.6 1.874 1.5 .059 AQP-HS-30/40A 2 .079 56 2.205 150 5.906 500.2 1.969.008 1.5 .059 24.5 .965 28.5 1.122 45 1.772 9 .354 General tolerance: 0.5 .020 With terminal cover CAD Data 59 2.323 1.5 .059 11.5 .453 47 1.850 5.5 .217 1.5 .059 AQP-PC 24.5 .965 General tolerance: 0.5 .020 DIN rail mounting plate Mounting rail CAD Data CAD Data 13.6 .535 M4 M4 56 2.205 47.6 1.874 M4 AT8-DLA1 18.1 .713 44 1.732 1,000 39.37 5.5 .217 AQP-DP 70 2.765 86 3.386 5 .197 15 10 15 .591 .394 .591 2.75R 15 10 15 .108R .591 .394 .591 40-5.5x15 slot 40-.217x.591 slot General tolerance: 0.5 .020 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 35 1.378 24 5 .945 1.5 .059 .197 7.5 .295 27 1.063 AQ-R Fastening plate CAD Data 12 .472 50 M4 1.969 10 .394 ATA4806 UP ATA4806 10 .394 Recommended Temperature Controllers <KT4H Temperature Controller> Our temperature controller is recommended for use with our Solid State Relays. Features * Data can be collected using the RS485 communications interface via a PLC. * Improved visibility using a negative type LCD and backlight. * Depth-wise length (chassis dimension) is 56 mm 2.205 inch. 48mm 1.890inch 56mm 2.205inch 48mm 1.890inch Substitute part numbers Power supply 100 to 240 V AC Control output Relay contact Part No. AKT4H111100 *For detailed product information about temperature controllers, please refer to our website: http://panasonic-denko.co.jp/ac/e/fasys/component/temperature_controller/ For Cautions for Use. All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd.