ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified
Nominal Zener Maximum Reverse Maximum Maximum
Voltage(3) Leakage Current Regulator Current Surge Current
VZ @ I ZT IZT ZZT @ I ZT ZZK @ IZK IZK IR @ VRIZM(2) IRM
(V) (mA) (Ω) (Ω)(mA) (µA) (V) (mA) (mA)
1N4728CG 3.3 76.0 10 400 1.0 100 1.0 276 1380
1N4729CG 3.6 69.0 10 400 1.0 100 1.0 252 1260
1N4730CG 3.9 64.0 9.0 400 1.0 50 1.0 234 1190
1N4731CG 4.3 58.0 9.0 400 1.0 10 1.0 217 1070
1N4732CG 4.7 53.0 8.0 500 1.0 10 1.0 193 970
1N4733CG 5.1 49.0 7.0 550 1.0 10 1.0 178 890
1N4734CG 5.6 45.0 5.0 600 1.0 10 2.0 162 810
1N4735CG 6.2 41.0 2.0 700 1.0 10 3.0 146 730
1N4736CG 6.8 37.0 3.5 700 1.0 10 4.0 133 660
1N4737CG 7.5 34.0 4.0 700 0.5 10 5.0 121 605
1N4738CG 8.2 31.0 4.5 700 0.5 10 6.0 110 550
1N4739CG 9.1 28.0 5.0 700 0.5 10 7.0 100 500
1N4740CG 10 25.0 7.0 700 0.25 10 7.6 91 454
1N4741CG 11 23.0 8.0 700 0.25 5.0 8.4 83 414
1N4742CG 12 21.0 9.0 700 0.25 5.0 9.1 76 380
1N4743CG 13 19.0 10 700 0.25 5.0 9.9 69 344
1N4744CG 15 17.0 14 700 0.25 5.0 11.4 61 305
1N4745CG 16 15.5 16 700 0.25 5.0 12.2 57 285
1N4746CG 18 14.0 20 750 0.25 5.0 13.7 50 250
1N4747CG 20 12.5 22 750 0.25 5.0 15.2 45 225
1N4748CG 22 11.5 23 750 0.25 5.0 16.7 41 205
1N4749CG 24 10.5 25 750 0.25 5.0 18.2 38 190
1N4750CG 27 9.5 35 750 0.25 5.0 20.6 34 170
1N4751CG 30 8.5 40 1000 0.25 5.0 22.8 30 150
1N4752CG 33 7.5 45 1000 0.25 5.0 25.1 27 135
1N4753CG 36 7.0 50 1000 0.25 5.0 27.4 25 125
1N4754CG 39 6.5 60 1000 0.25 5.0 29.7 23 115
1N4755CG 43 6.0 70 1500 0.25 5.0 32.7 22 110
1N4756CG 47 5.5 80 1500 0.25 5.0 35.8 19 95
1N4757CG 51 5.0 95 1500 0.25 5.0 38.8 18 90
1N4758CG 56 4.5 110 2000 0.25 5.0 42.6 16 80
1N4759CG 62 4.0 125 2000 0.25 5.0 47.1 14 70
1N4760CG 68 3.7 150 2000 0.25 5.0 51.7 13 65
1N4761CG 75 3.3 175 2000 0.25 5.0 56.0 12 60
1N4762CG 82 3.0 200 3000 0.25 5.0 62.2 11 55
1N4763CG 91 2.8 250 3000 0.25 5.0 69.2 10 50
1N4764CG 100 2.5 350 3000 0.25 5.0 76.0 9.0 45
Notes:
(1) The Zener impedance is derived from the 1kHZ AC voltage which results when an AC current having an RMS value equal
to 10% of the Zener current (I
. Zener impedance is measured at two points to
insure a sharp knee on the breakdown curve and to eliminate unstable units
(2) Valid provided that electrodes at a distance of 10mm from case are kept at ambient temperature
(3) Measured under thermal equilibrium and DC test conditions.
±
±
and tolerances are available upon request.
Type No. Maximum Zener Impedance(1)