Document Number 2660
Issue 2
2N6299SMD 2N6299SMD05
2N6301SMD 2N6301SMD05
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated)
Collector – Emitter Sustaining
Voltage *
Collector Cut–off Current
Collector Cut–off Current
Emitter Cut–off Current
DC Current Gain*
Collector – Emitter Saturation
Voltage*
Base – Emitter Saturation Voltage*
Base – Emitter On Voltage*
Output Capacitance
Magnitude of Common Emitter
Small Signal Short Circuit Current
Transfer Ratio
Small Signal Current Gain*
80
0.5
0.5
5.0
2
750 18000
100 2.0
3.0
4.0
2.8
200
25 350
300
V
mA
mA
mA
—
V
V
V
pF
—
—
VCEO(sus)
ICEO
ICEX
IEBO
hFE
VCE(sat)
VBE(sat)
VBE(on)
Cob
hfe
hfe
Notes
DYNAMIC CHARACTERISTICS
ON CHARACTERISTICS
OFF CHARACTERISTICS
Parameter Test Conditions Min. Typ. Max. Unit
* Pulse test: tp= 300µs , Duty Cycle = 2%
IC= 100mA IB= 0
VCE = 40V IB= 0
VCE = Rated VCB VBE(off) = 1.5V
TC= 150°C
VBE = 5V IC= 0
VCE = 3V IC= 4A
VCE = 3V IC= 8A
IC= 4A IB= 16mA
IC= 8A IB= 80mA
IC= 8A IB= 80mA
VCE = 3V IC= 4A
VCB = 10V IE= 0
f = 0.1MHz
VCE = 3V
IC= 3A
f = 1MHz
VCE = 3V IC= 3A
f = 1kHz