The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors FH29B Series 1.2mm Space saving (80 pos. shown) 4.55mm 17.82m m (80p Features 1. Low profile, small PCB mounting area, weight reduction Protruding only 1.2mm above the board connector occupies 40% less area than comparable type having contacts spaced on 0.3mm centers. Creative design, coupled with high manufacturing capabilities resulted in extremely low weight on the connector. os.) Can be mounted over conductive traces. No exposed contacts on the bottom of the connector 2. Easy solderability on the PC board The soldering leads are on 0.4mm pitch, exiting on front and back of the connector. 3. FPC temporary hold and verification of correct insertion Operation 1 Actuator open 2 Insert FPC 1 Actuator The connector has built-in FPC hold protrusions allowing the tactile feel of the correct FPC insertion and holding it in position before closing of the actuator. 4. Uses standard 0.2mm thick FPC Proven Flip Lock actuator allows easy insertion of FPC. Tactile sensation when fully closed confirms complete electrical and mechanical connection. FPC notch 2 FPC 5. One-finger operation of the actuator Proven (in several other Hirose's connectors) Flip-Lock rotating actuator assures reliable mechanical and electrical connection with FPC, confirming it with a definite tactile feel. 6. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. 7. Board placement with automatic equipment 3 Close the actuator 4 FPC connected 3 Flat top surface and packaging on the tape-and-reel allows the use of vacuum nozzles. Standard reel contains 5,000 connectors. 3 Applications Mobile phones, PDA's, digital cameras, digital video cameras, LCD connections, plasma displays (PDP), camera modules and other compact devices requiring Flexible Printed Circuit connections using high reliability ultra-small profile connectiors. 4 2008.4 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeries0.2mm have been discontinued, or will be Pitch, discontinued soon. Please check the board, products Flexible status on thePrinted Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FH29B Contact 1.2mm above the Circuit ZIF Connectors Product Specifications Rating Recommended FPC Rated current 0.25 A DC(Note 1) Rated voltage 40 V AC/DC Operating temperature range -55c to +85c (Note 2) Storage temperature range -10c to +50c(Note 3) Operating humidity range Relative humidity 90% max. Storage humidity range Relative humidity 90% max. (No condensation) Thickness: = 0.2+/- 0.03mm gold plated Item Specification Conditions 1.Insulation resistance 500 M ohms min. 100 V DC 2.Withstanding voltage No flashover or insulation breakdown. 120 V AC / 1 minute 3.Contact resistance 100 m ohms max. * Including FPC conductor resistance 1 mA 4.Durability (insertion/ withdrawal) Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. 20 cycles 5.Vibration No electrical discontinuity of longer. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 directions. 6.Shock No electrical discontinuity of longer. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. Acceleration of 981 m/s2, 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis 7.Humidity (Steady state) Contact resistance: 100 m ohms max. Insulation resistance: 50 M ohms min. No damage, cracks, or parts dislocation. 96 hours at 40c and humidity of 90% to 95%. 8.Temperature cycle Contact resistance: 100 m ohms max. Insulation resistance: 50 M ohms min. No damage, cracks, or parts dislocation. Temperature: -55c/+15c to +35c/+85c/+15c to +35c Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes) 5 cycles 9.Resistance to soldering heat No deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 350c +/-10c for 5 seconds Note 1: When passing the current through all of the contacts, use 70% of the rated current. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials Part Material Insulator LCP Finish Actuator PA Color: Dark brown Contacts Phosphor bronze Gold flash plated Remarks Color: Beige UL94V-0 --------------- Ordering information FH29B - 80S - 0.2 SHW (05) 1 1 Series name: FH29B 2 No. of contacts Number of contacts: 34,40,44,50,60,70, 80,90,100,120 3 Contact pitch: 0.2 mm 2 2 3 4 5 4 Terminal type SHW: SMT horizontal mounting type 5 Plating specifications (05): Gold flash plated The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status onPitch, the Hirose website RoHS search www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH29B Series0.2mm Contact 1.2mm above theat board, Flexible Printed Circuit Connectors Connector Dimension A B 4 4.55 A Xn (0.15) 0.15 A 0.4 A** Xn (0.15) 0.15 A 0.4 B (C:FPC insertion slot dimension) B B (3.6) (0.4) 0.25 (1.42) 3 1.2 1.2 (1.2) (2.4) (1.44) (1 35 ) 0.3 1 0.25 0.79 0.45 1 4.55 Notes 1 The coplanarity of each terminal lead is within 0.1 max. 2 Slight variations in color of the plastic compounds do not affect form, fit or function of the connector. 3 The form of the actuator is as depicted by the broken line in connectors having 92 or more contacts. Unit: mm Part Number CL No. Number of Contacts A B C n FH29B- 34S-0.2SHW(05) 580-0312-2-05 34 8.62 6.4 7.24 17 FH29B- 40S-0.2SHW(05) 580-0313-5-05 40 9.82 7.6 8.44 20 FH29B- 44S-0.2SHW(05) 580-0314-8-05 44 10.62 8.4 9.24 22 FH29B- 50S-0.2SHW(05) 580-0315-0-05 50 11.82 9.6 10.44 25 FH29B- 60S-0.2SHW(05) 580-0316-3-05 60 13.82 11.6 12.44 30 FH29B- 70S-0.2SHW(05) 580-0317-6-05 70 15.82 13.6 14.44 35 FH29B- 80S-0.2SHW(05) 580-0318-9-05 80 17.82 15.6 16.44 40 FH29B- 90S-0.2SHW(05) 580-0319-1-05 90 19.82 17.6 18.44 45 FH29B-100S-0.2SHW(05) 580-0320-0-05 100 21.82 19.6 20.44 50 FH29B-120S-0.2SHW(05) 580-0321-3-05 120 25.82 23.6 24.44 60 RoHS YES Tape and packaging (5,000 pieces/reel). Order by number of reels. 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeries0.2mm have been discontinued, or will be Pitch, discontinued soon. Please check the board, products Flexible status on thePrinted Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FH29B Contact 1.2mm above the Circuit ZIF Connectors BRecommended PCB mounting pattern and metal mask dimensions Recommended metal mask thickness: 0.12mm (A) B C 0.4 (0.45) (4.55) (0.84) (0.2) (0.2) (4) (0.2) 0.850.05 1.250.05(LAND PATTERN) 0.850.05(METAL MASK) 4.950.05 (0.2) n 0.220.02(LAND PATTERN) 0.04 C 0.20.01(METAL MASK) 0.4 n 0.220.02(LAND PATTERN) 0.04 C 0.20.01(METAL MASK) B Note: The Recommended Land Dimensions Diagram is an example. The dimensions may differ depending on the mounting conditions (including the cream solder, board size, and temperature profile); therefore, use of the connectors should follow a thorough check of the mounting conditions. Unit: mm Part Number CL No. Number of Contacts A B n FH29B- 34S-0.2SHW(05) 580-0312-2-05 34 8.62 6.4 17 FH29B- 40S-0.2SHW(05) 580-0313-5-05 40 9.82 7.6 20 FH29B- 44S-0.2SHW(05) 580-0314-8-05 44 10.62 8.4 22 FH29B- 50S-0.2SHW(05) 580-0315-0-05 50 11.82 9.6 25 FH29B- 60S-0.2SHW(05) 580-0316-3-05 60 13.82 11.6 30 FH29B- 70S-0.2SHW(05) 580-0317-6-05 70 15.82 13.6 35 FH29B- 80S-0.2SHW(05) 580-0318-9-05 80 17.82 15.6 40 FH29B- 90S-0.2SHW(05) 580-0319-1-05 90 19.82 17.6 45 FH29B-100S-0.2SHW(05) 580-0320-0-05 100 21.82 19.6 50 FH29B-120S-0.2SHW(05) 580-0321-3-05 120 25.82 23.6 60 Tape and packaging (5,000 pieces/reel). Order by number of reels. 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status onPitch, the Hirose website RoHS search www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH29B Series0.2mm Contact 1.2mm above theat board, Flexible Printed Circuit Connectors BPackaing Specifications (2) 40.1 20.15 80.1 + 0 0 .1 Tape width up to 24mm 1.750.1 Embossed Carrier Tape Dimensions D G0.3 E0.1 O1 .5 (0.3) (5.65) 40.1 20.15 (2) 80.1 1.5+0.15 0 (5.65) 1.7+0.15 0 R0. 75 R 0. 75 D F0.1 G0.3 E0.1 1. 5 +0 0 .1 C L (0.3) 1.750.1 Tape width 32mm and over (1.52) Flat surface, for placement with automatic equipment Unreeling direction Unit: mm E F G H J 9.62 7.5 ----------- 24 25.4 29.4 10.82 11.5 ----------- 24 25.4 29.4 11.62 11.5 ----------- 24 25.4 29.4 12.82 11.5 ----------- 24 25.4 29.4 60 14.82 11.5 ----------- 24 25.4 29.4 70 16.82 11.5 ----------- 24 25.4 29.4 580-0318-9-05 80 18.82 14.2 28.4 32 33.4 37.4 FH29B- 90S-0.2SHW(05) 580-0319-1-05 90 20.82 20.2 40.4 44 45.4 49.4 FH29B-100S-0.2SHW(05) 580-0320-0-05 100 22.82 20.2 40.4 44 45.4 49.4 FH29B-120S-0.2SHW(05) 580-0321-3-05 120 26.82 20.2 40.4 44 45.4 49.4 Part Number CL No. Number of Contacts FH29B- 34S-0.2SHW(05) 580-0312-2-05 34 FH29B- 40S-0.2SHW(05) 580-0313-5-05 40 FH29B- 44S-0.2SHW(05) 580-0314-8-05 44 FH29B- 50S-0.2SHW(05) 580-0315-0-05 50 FH29B- 60S-0.2SHW(05) 580-0316-3-05 FH29B- 70S-0.2SHW(05) 580-0317-6-05 FH29B- 80S-0.2SHW(05) D (O1 3) Reel Dimensions End section Mounting section Lead section (400mm min.) (O80) (O380) (H:INSIDE) Blank section (J:OUTSIDE) (10 pockets min.) Embossed carrier tape Blank section Top cover tape (10 pockets min.) 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeries0.2mm have been discontinued, or will be Pitch, discontinued soon. Please check the board, products Flexible status on thePrinted Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FH29B Contact 1.2mm above the Circuit ZIF Connectors BFPC Recommended Dimensions Diagram K0.05 0.20.03 L0.05 B0.03 0.40.07 0.40.07 0.40.03 R0 A B 5 0.0 5 .2 0.0 0 R .2 R0 1 R0 .2 R0 .2 R0 R0 .2 .2 0. 05 4.7 MIN.(Stiffener) 4.20.3(UNCOVER AREA) .2 0.5 MIN.(Overlap) Covering layer M0.05 le) 1 (K) ho (0.1) gh Th .2( 2.220.07 3.80.07 0.270.03 2.40.07 O0 0.3750.15 25 R0.3 R0 .22 5 (0.1) (2.2) 3.90.15 2.660.1 0.740.15 0.15_0.1 rou +0.15 (0.1) 0.270.03 0.130.03 0.2 Positioning tab 0.170.03 0.2 For checking FPC (0.07) disengagement shift 1 To prevent pattern cutting, when 4.7 mm or more of reinforecement film cannot be secured, make the overlap amount 0.5 mm or greater. Unit: mm Part Number Number of Contacts K L M 7.2 6.87 8.4 8.07 FH29B- 34S-0.2SHW(05) 580-0312-2-05 34 8.06 FH29B- 40S-0.2SHW(05) 580-0313-5-05 40 9.26 FH29B- 44S-0.2SHW(05) 580-0314-8-05 44 10.06 9.2 8.87 FH29B- 50S-0.2SHW(05) 580-0315-0-05 50 11.26 10.4 10.07 FH29B- 60S-0.2SHW(05) 580-0316-3-05 60 13.26 12.4 12.07 FH29B- 70S-0.2SHW(05) 580-0317-6-05 70 15.26 14.4 14.07 FH29B- 80S-0.2SHW(05) 580-0318-9-05 80 17.26 16.4 16.07 FH29B- 90S-0.2SHW(05) 580-0319-1-05 90 19.26 18.4 18.07 FH29B-100S-0.2SHW(05) 580-0320-0-05 100 21.26 20.4 20.07 120 25.26 24.4 24.07 FH29B-120S-0.2SHW(05) 6 CL No. 580-0321-3-05 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status onPitch, the Hirose website RoHS search www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH29B Series0.2mm Contact 1.2mm above theat board, Flexible Printed Circuit Connectors BFPC Construction (Recommended Specifications) Using Double-sided FPC Thickness(m) Material Material Name Contact area Contact area 25.0 12.5 30.0 25.0 3.5 3.5 Pattern copper plating 13.0 13.0 Pattern copper foil 18.0 Covering layer film Polyimide Cover adhesive Surface treatment Nickel base gold plated 10.0 Base adhesive Base film Polyimide 25.0 12.0 --------25.0 --------- Base adhesive 10.0 Pattern copper foil 18.0 12.0 Pattern copper plating 13.0 13.0 Cover adhesive 25.0 20.0 Covering layer film 12.5 12.5 30.0 30.0 25.0 75.0 203.0 216.0 Reinforecement material adhesive Stiffener Through hole 3-Layer CCL 2-Layer CCL Polyimide Total Note: Recommended FPC thickness: 0.20.03mm 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeries0.2mm have been discontinued, or will be Pitch, discontinued soon. Please check the board, products Flexible status on thePrinted Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FH29B Contact 1.2mm above the Circuit ZIF Connectors BRecommended Temperature Profile Using Lead-free Solder Paste HRS test condition MAX 250c Solder method : Reflow, IR/hot air Environment : Room air (Nihon Den-netsu Co., Ltd.'s Part Number: SENSBY NR-2) 250 Temperature 230c Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu 200 200c (Senju Metal Industry, Co., Ltd.'s Part Number: M705-221CM5-42-10.5) Test board : Glass epoxy 25mm45mm0.8mm thick Land dimensions : 0.22mm0.85mm, 0.22mm1.25mm 150 150c Metal mask (c) : 0.200.850.12mm thick The temperature profiles are based on the above conditions. 100 In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. 50 Consult your solder paste and equipment manufacturer for specific 25c 0 (60sec.) 90 sec. to 120 sec. Preheating Start Time (Seconds) 8 (60sec.) Soldering recommendations. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status onPitch, the Hirose website RoHS search www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH29B Series0.2mm Contact 1.2mm above theat board, Flexible Printed Circuit Connectors BOperation and Precautions Operation 1.FPC insertion procedure. Connector installed on the board. 1 Lift up the actuator. Use thumb or index finger. 2 Fully insert the FPC in the connector parallel to mounting surface, with the exposed conductive traces facing down. 10 FPC conductor surface (Bottom side) FPC temporary hold protrusion 3 Rotate down the actuator until firmly closed. It is critical that the inserted FPC is not moved and remains fully inserted. 2. FPC removal 1 Lift up the actuator. Carefully withdraw the FPC. 10 135 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeries0.2mm have been discontinued, or will be Pitch, discontinued soon. Please check the board, products Flexible status on thePrinted Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FH29B Contact 1.2mm above the Circuit ZIF Connectors Precautions These connectors are of a miniature and thin design and must be handled with care. Please check the following matters and use accordingly. Precautions When Board Mounting SAmount of board flexing 0.5MAX The amount of board flexing should be kept to a minimum. The degree of flatness of these connectors is 0.1 mm or less; however, a large amount of flexing may give rise to solder faults. * Various factors can contribute to flexing and we ask that you conduct a check beforehand. SConnector Load Do not apply an external force of 0.5 N or greater to the connector before mounting. Doing so could damage the connector. Before mounting, do not insert FPC and do not operate the connector. S Board Load Be careful that a load is not applied to the board during an assembly process such as when dividing boards into a number of smaller ones, or when fastening boards with screws. Doing so may damage the connector. Connector 100 Board 0.5MAX F Connector Board F 100 Precautions When Inserting or Coupling FPC Pay attention to the following points when inserting or coupling FPC. SActuator Operation 1 Be careful not to apply excessive force when opening the actuator from the initial condition (prior to FPC insertion). Also note that the deep insertion of a fingernail, finger, or something else could misshape the contacts as indicated the diagrams below. Example 1 Example 2 2 As illustrated in the diagram below, the actuator rotates centered on an axis of rotation and the actuator should be operated so that it rotates. Axis of rotation 10 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status onPitch, the Hirose website RoHS search www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH29B Series0.2mm Contact 1.2mm above theat board, Flexible Printed Circuit Connectors Precautions 3 The actuator is designed so that it does not open more than 135 degrees. Do not apply force to make it move back further. (Refer to the diagrams below.) Excessive force will cause the lock lever to bend or break. (Force should be 1 N or less.) 135 4 When operating the actuator, do so from the center portion. 5 As illustrated in the diagrams below, do not take the actuator with your fingers and lift it or pick it. Doing so may cause damage. (Do not perform any operations other than the rotation operation previously described in Step 2 .) S Contact Orientation This connector is a bottom-contact connector and the FPC conductor exposed surface is inserted facing downward. S FPC Insertion 1 There is an FPC positioning tab that requires the FPC to be inserted at an angle of about 10 with 10 respect to the board surface and perpendicular to the connector, and the FPC should be inserted firmly all the way to the back. Diagonal insertion of the FPC will result in a short-circuit fault due to a shift of the pitch, and the corner of the FPC may catch on the contacts and cause the contacts to become misshapen. FPC temporary hold protrusion 11 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeries0.2mm have been discontinued, or will be Pitch, discontinued soon. Please check the board, products Flexible status on thePrinted Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. FH29B Contact 1.2mm above the Circuit ZIF Connectors Precautions SFPC Insertionw 2 Do not insert the FPC on an angle from above. 50 As illustrated in the diagram below, when the FPC has been inserted on an angle during the FPC insertion procedure, the FPC will bend and the pattern may break, or the FPC may not be inserted sufficiently which will cause a conduction fault. *To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion space at the time of board layout. Also note that insertion will be difficult when the FPC is too short and we ask that due consideration be given to a suitable parts layout. *Please contact the FPC manufacturer for information about the FPC bending qualities and breakage. S Checking the Locked Condition When locking, check that the actuator is level with the board surface as illustrated in the diagram below. Note that when the actuator is oriented in the vicinity of 0 degrees, measures should be taken so that an excessive load is not applied. Such a load may cause contact misshaping. (Force should be 1 N or less.) Precautions When Routing the FPC After FPC Coupling SFPC Load Be careful not to apply a load to the FPC after FPC mounting. Doing so may release the lock of the connector or cause FPC disconnection or damage. Especially if a load is applied to the FPC in a continuous manner, measures should be taken to anchor the FPC. Also, with regard to routing the FPC, take measures not to abruptly bend the FPC in the vicinity of the insertion area. 12 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status onPitch, the Hirose website RoHS search www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH29B Series0.2mm Contact 1.2mm above theat board, Flexible Printed Circuit Connectors Precautions Precautions When Removing the FPC SWhen releasing the actuator, release it in the vicinity of the center portion. When the lock is closed with the FPC inserted, rotating the actuator from the tip could result in actuator damage. STo pull out the FPC, first release the actuator, then pull out the FPC. There is an FPC positioning tab that requires the FPC to be pulled out at an angle of about 10 with respect to the board surface. Pulling out the FPC level with the board (at about 0), or applying a load of 5 N or greater to the connector (FPC positioning cutout), introduces the possibility that the connector (FPC positioning cutout) will be damaged. 10 135 FPC temporary hold protrusion Other Precautions SHand Soldering Precautions When hand soldering for repair or at other times, pay attention to the following matters. 1 Do not perform reflow or hand soldering with the FPC inserted in the connector. 2 Be careful not to apply excessive heat or touch the soldering iron anywhere other than the connector leads. Doing so will cause the connector to become misshapen or melt. 3 Do not supply excessive solder (flux). Supplying excessive solder (flux) to the contacts will cause the flux to adhere to the contacts or the rotating portion of the actuator. This will cause a contact fault or trouble with the rotation operation of the actuator. Also note that application of excessive solder to the reinforcement fittings will give rise to breakdown of the rotation operation of the lock lever and will cause connector damage. 13