FH29B-34S-0.2SHW(05) - Hirose Electric

1

0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

FH29B Series

2008.4

■Features

1.

Low profile, small PCB mounting area, weight

reduction

Protruding only 1.2mm above the board connector

occupies 40% less area than comparable type having

contacts spaced on 0.3mm centers.

Creative design, coupled with high manufacturing

capabilities resulted in extremely low weight on the

connector.

2. Easy solderability on the PC board

The soldering leads are on 0.4mm pitch, exiting on front

and back of the connector.

3.

FPC temporary hold and verification of correct

insertion

The connector has built-in FPC hold protrusions allowing

the tactile feel of the correct FPC insertion and holding it

in position before closing of the actuator.

4. Uses standard 0.2mm thick FPC

Proven Flip Lock actuator allows easy insertion of FPC.

Tactile sensation when fully closed confirms complete

electrical and mechanical connection.

5. One-finger operation of the actuator

Proven (in several other Hirose’s connectors) Flip-Lock

rotating actuator assures reliable mechanical and

electrical connection with FPC, confirming it with a

definite tactile feel.

6. Conductive traces on the PCB can run

under the connector

No exposed contacts on the bottom of the connector.

7. Board placement with automatic equipment

Flat top surface and packaging on the tape-and-reel

allows the use of vacuum nozzles.

Standard reel contains 5,000 connectors.

■Applications

Mobile phones, PDA’s, digital cameras, digital video

cameras, LCD connections, plasma displays (PDP), camera

modules and other compact devices requiring Flexible

Printed Circuit connections using high reliability ultra-small

profile connectiors.

●Space saving (80 pos. shown)

●Can be mounted over conductive traces.

1.2mm

4.55mm

●Operation

Actuator open

Insert FPC

FPC

FPC notchFPC notchFPC notch

FPC

ActuatorActuatorActuator

1

2

1

2

Actuator open

Insert FPC

17.82mm (80pos.)

Close the actuator

FPC connected

3

4

Close the actuator

FPC connected

No exposed contacts on the bottom of the connector

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Terminal type

SHW: SMT horizontal mounting type

Plating specifications

(05): Gold flash plated

---------------

Temperature: -55ç/+15ç to +35ç/+85ç/+15ç to +35ç

Time: 30 /2 to 3 /30 /2 to 3 (Minutes)

5 cycles

Reflow: At the recommended temperature profile

Manual soldering: 350ç +/-10ç for 5 seconds

1 mA

20 cycles

500 M ohms min.

No flashover or insulation breakdown.

100 V DC

120 V AC / 1 minute

100 m ohms max.

* Including FPC conductor resistance

Contact resistance: 100 m ohms max.

No damage, cracks, or parts dislocation.

No electrical discontinuity of longer.

Contact resistance: 100 m ohms max.

No damage, cracks, or parts dislocation.

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,

10 cycles in each of the 3 directions.

No electrical discontinuity of longer.

Contact resistance: 100 m ohms max.

No damage, cracks, or parts dislocation.

Acceleration of 981 m/s2, 6 ms duration, sine half-wave waveform,

3 cycles in each of the 3 axis

Contact resistance: 100 m ohms max.

Insulation resistance: 50 M ohms min.

No damage, cracks, or parts dislocation.

96 hours at 40ç and humidity of 90% to 95%.

Contact resistance: 100 m ohms max.

Insulation resistance: 50 M ohms min.

No damage, cracks, or parts dislocation.

No deformation of components affecting performance.

■Materials

■Ordering information

FH29B - 80S - 0.2 SHW (05)

1 3 42 5

Series name: FH29B

No. of contacts

Number of contacts: 34,40,44,50,60,70,

80,90,100,120

Contact pitch: 0.2 mm

1

2

3

4

5

Part

Contacts

Insulator

Actuator

LCP

PA

Phosphor bronze

Color: Beige

Color: Dark brown

Gold flash plated

UL94V-0

Material Finish Remarks

■Product Specifications

Rating

Rated current 0.25 A DC(Note 1)

Rated voltage 40 V AC/DC

Operating temperature range -55ç to +85ç (Note 2)

Operating humidity range Relative humidity 90% max.

(No condensation)

Storage temperature range -10ç to +50ç(Note 3)

Storage humidity range Relative humidity 90% max.

Recommended FPC Thickness: = 0.2+/- 0.03mm gold plated

4.Durability

(insertion/ withdrawal)

5.Vibration

6.Shock

7.Humidity

(Steady state)

8.Temperature cycle

9.Resistance to

soldering heat

3.Contact resistance

1.Insulation resistance

2.Withstanding voltage

Item Specification Conditions

Note 1: When passing the current through all of the contacts, use 70% of the rated current.

Note 2: Includes temperature rise caused by current flow.

Note 3: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range

and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.

2

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

3

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

(0.15)

0.4

B

(0.15)

B

A

(C:FPC insertion slot dimension)

4

4.55

B

A**

Xn

∆

0.15 A

A

0.15 A

(1.2)

(2.4)

1.2

0.3 (0.4) 0.25

1.2

0.45

4.55

0.25

0.79

(1.42)

(3.6)

(1.44)

(135˚)

3

1

■Connector Dimension

Notes The coplanarity of each terminal lead is within 0.1 max.

Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.

The form of the actuator is as depicted by the broken line in connectors having 92 or more contacts.

1

2

3

Unit: mm

Tape and packaging (5,000 pieces/reel).

Order by number of reels.

Part Number

FH29B- 34S-0.2SHW(05)

FH29B- 40S-0.2SHW(05)

FH29B- 44S-0.2SHW(05)

FH29B- 50S-0.2SHW(05)

FH29B- 60S-0.2SHW(05)

FH29B- 70S-0.2SHW(05)

FH29B- 80S-0.2SHW(05)

FH29B- 90S-0.2SHW(05)

FH29B-100S-0.2SHW(05)

FH29B-120S-0.2SHW(05)

580-0312-2-05

580-0313-5-05

580-0314-8-05

580-0315-0-05

580-0316-3-05

580-0317-6-05

580-0318-9-05

580-0319-1-05

580-0320-0-05

580-0321-3-05

34

40

44

50

60

70

80

90

100

120

8.62

9.82

10.62

11.82

13.82

15.82

17.82

19.82

21.82

25.82

6.4

7.6

8.4

9.6

11.6

13.6

15.6

17.6

19.6

23.6

7.24

8.44

9.24

10.44

12.44

14.44

16.44

18.44

20.44

24.44

17

20

22

25

30

35

40

45

50

60

YES

CL No. Number of Contacts AB C n RoHS

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

C

B

0.22±0.02(LAND PATTERN)

0.2±0.01(METAL MASK)

1.25±0.05(LAND PATTERN)

0.85±0.05(METAL MASK)

(4.55)

(4)

4.95±0.05

0.85±0.05

0.04 C

0.22±0.02(LAND PATTERN)

0.2±0.01(METAL MASK)

0.04 C

(A)

(0.45)

(0.2)(0.2)

(0.84)

0.4

∞n

BRecommended PCB mounting pattern and metal mask dimensions

Note: The Recommended Land Dimensions Diagram is an example. The dimensions may differ depending on the mounting conditions

(including the cream solder, board size, and temperature profile); therefore, use of the connectors should follow a thorough check

of the mounting conditions.

Tape and packaging (5,000 pieces/reel).

Order by number of reels.

Unit: mm

Part Number

FH29B- 34S-0.2SHW(05)

FH29B- 40S-0.2SHW(05)

FH29B- 44S-0.2SHW(05)

FH29B- 50S-0.2SHW(05)

FH29B- 60S-0.2SHW(05)

FH29B- 70S-0.2SHW(05)

FH29B- 80S-0.2SHW(05)

FH29B- 90S-0.2SHW(05)

FH29B-100S-0.2SHW(05)

FH29B-120S-0.2SHW(05)

580-0312-2-05

580-0313-5-05

580-0314-8-05

580-0315-0-05

580-0316-3-05

580-0317-6-05

580-0318-9-05

580-0319-1-05

580-0320-0-05

580-0321-3-05

34

40

44

50

60

70

80

90

100

120

8.62

9.82

10.62

11.82

13.82

15.82

17.82

19.82

21.82

25.82

6.4

7.6

8.4

9.6

11.6

13.6

15.6

17.6

19.6

23.6

17

20

22

25

30

35

40

45

50

60

CL No. Number of Contacts A B n

4

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

●Recommended metal mask thickness: 0.12mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

5

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

BPackaing Specifications

Embossed Carrier Tape Dimensions

●Tape width up to 24mm

●Tape width 32mm and over

●Reel Dimensions

1.75±0.1

8±0.1

2±0.15

4±0.1

Ø1.5+0.1

0

(5.65)

E±0.1

G±0.3

D

(2)

(0.3)

(5.65)

(1.52)

4±0.1

C

L

(2)

(0.3)

2±0.15 8±0.1

1.7

G±0.3

F±0.1

1.75±0.1

E±0.1

+0.15

0

R0.75

1.5+0.15

0

1.5

+0.1

0

D

Flat surface, for placement with automatic equipment

Unreeling direction

(J:OUTSIDE)

(H:INSIDE)

(Ø13)

(Ø80)

(Ø380)

Mounting section

End section

Blank section Blank section

(10 pockets min.) (10 pockets min.)

Lead section (400mm min.)

Embossed carrier tape

Top cover tape

Unit: mm

Part Number

FH29B- 34S-0.2SHW(05)

FH29B- 40S-0.2SHW(05)

FH29B- 44S-0.2SHW(05)

FH29B- 50S-0.2SHW(05)

FH29B- 60S-0.2SHW(05)

FH29B- 70S-0.2SHW(05)

FH29B- 80S-0.2SHW(05)

FH29B- 90S-0.2SHW(05)

FH29B-100S-0.2SHW(05)

FH29B-120S-0.2SHW(05)

580-0312-2-05

580-0313-5-05

580-0314-8-05

580-0315-0-05

580-0316-3-05

580-0317-6-05

580-0318-9-05

580-0319-1-05

580-0320-0-05

580-0321-3-05

34

40

44

50

60

70

80

90

100

120

9.62

10.82

11.62

12.82

14.82

16.82

18.82

20.82

22.82

26.82

7.5

11.5

14.2

20.2

-----------

28.4

40.4

24

32

44

CL No. Number of Contacts D E F G

25.4

33.4

45.4

29.4

37.4

49.4

H J

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

(0.1)

0.27±0.03

B±0.03

M±0.05

(K)

K±0.05

0.4±0.07

R0.2

R0.2±0.05

0.4±0.03

0.4±0.07

0.2±0.03

4.2±0.3(UNCOVER AREA)

4.7 MIN.(Stiffener)

0.5 MIN.(Overlap)

L±0.05

0.15

0.27±0.03

0.13±0.03

0.17±0.03

(0.07)

For checking FPC

disengagement shift

(2.2)

(0.1)

0.2 3.9±0.15

2.66±0.1

0.74±0.15

0.375±0.15

2.22±0.07

2.4±0.07

3.8±0.07

0.2

+0.15

_0.1

Ø0.2(Through hole)

R0.325

R0.225

R0.2±0.05

Positioning tab

Covering

layer

B

A

1

6

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

BFPC Recommended Dimensions Diagram

To prevent pattern cutting, when 4.7 mm or more of reinforecement film cannot be secured, make the overlap amount

0.5 mm or greater.

Unit: mm

Part Number

FH29B- 34S-0.2SHW(05)

FH29B- 40S-0.2SHW(05)

FH29B- 44S-0.2SHW(05)

FH29B- 50S-0.2SHW(05)

FH29B- 60S-0.2SHW(05)

FH29B- 70S-0.2SHW(05)

FH29B- 80S-0.2SHW(05)

FH29B- 90S-0.2SHW(05)

FH29B-100S-0.2SHW(05)

FH29B-120S-0.2SHW(05)

580-0312-2-05

580-0313-5-05

580-0314-8-05

580-0315-0-05

580-0316-3-05

580-0317-6-05

580-0318-9-05

580-0319-1-05

580-0320-0-05

580-0321-3-05

34

40

44

50

60

70

80

90

100

120

8.06

9.26

10.06

11.26

13.26

15.26

17.26

19.26

21.26

25.26

7.2

8.4

9.2

10.4

12.4

14.4

16.4

18.4

20.4

24.4

6.87

8.07

8.87

10.07

12.07

14.07

16.07

18.07

20.07

24.07

CL No. Number of Contacts K L M

1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

7

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

BFPC Construction (Recommended Specifications)

Using Double-sided FPC

Material Name

Covering layer film

Cover adhesive

Surface treatment

Pattern copper plating

Pattern copper foil

Base adhesive

Base film

Base adhesive

Pattern copper foil

Pattern copper plating

Cover adhesive

Covering layer film

Reinforecement material adhesive

Stiffener

Polyimide

Nickel base gold plated

Polyimide

Total

25.0

30.0

3.5

13.0

18.0

10.0

25.0

10.0

18.0

13.0

25.0

12.5

30.0

25.0

203.0

12.5

25.0

3.5

13.0

12.0

---------

25.0

---------

12.0

13.0

20.0

12.5

30.0

75.0

216.0

Material

3-Layer CCL 2-Layer CCL

Through hole

Contact areaContact area

Thickness(µm)

Note: Recommended FPC thickness: 0.2±0.03mm

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

BRecommended Temperature Profile

●Using Lead-free Solder Paste

8

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

MAX 250ç

Start

(ç)

Time (Seconds)

25ç (60sec.) (60sec.)90 sec. to 120 sec.

Preheating Soldering

0

50

100

150 150ç

200ç

230ç

200

250

Temperature

HRS test condition

Solder method : Reflow, IR/hot air

(Nihon Den-netsu Co., Ltd.'s Part Number: SENSBY NR-2)

Environment : Room air

Solder composition

: Paste, 96.5%Sn/3.0%Ag/0.5%Cu

(Senju Metal Industry, Co., Ltd.'s Part Number: M705-221CM5-42-10.5)

Test board : Glass epoxy 25mm∞45mm∞0.8mm thick

Land dimensions : 0.22mm∞0.85mm, 0.22mm∞1.25mm

Metal mask : 0.20∞0.85∞0.12mm thick

The temperature profiles are based on the above conditions.

In individual applications the actual temperature may vary, depending

on solder paste type, volume/thickness and board size/thickness.

Consult your solder paste and equipment manufacturer for specific

recommendations.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

9

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

BOperation and Precautions

Operation

1.FPC insertion procedure. Connector installed on the board.

Lift up the actuator. Use thumb or index finger.

1

2. FPC removal

Lift up the actuator. Carefully withdraw the

FPC.

1

Fully insert the FPC in the connector parallel to

mounting surface, with the exposed conductive

traces facing down.

2

Rotate down the actuator until firmly closed. It is

critical that the inserted FPC is not moved and

remains fully inserted.

3

FPC conductor

surface (Bottom side)

135°

10°

FPC temporary hold protrusion

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Example 1 Example 2

Axis of

rotation

Precautions

These connectors are of a miniature and thin design and must be handled with care.

Please check the following matters and use accordingly.

Precautions When Board Mounting

SAmount of board flexing

The amount of board flexing should be kept to a minimum.

The degree of flatness of these connectors is 0.1 mm or less; however, a large amount of flexing may give

rise to solder faults.

* Various factors can contribute to flexing and we ask that you conduct a check beforehand.

SConnector Load

Do not apply an external force of 0.5 N or greater to the connector before mounting. Doing so could damage

the connector. Before mounting, do not insert FPC and do not operate the connector.

SBoard Load

Be careful that a load is not applied to the board during an assembly process such as when dividing boards

into a number of smaller ones, or when fastening boards with screws.

Doing so may damage the connector.

Precautions When Inserting or Coupling FPC

Pay attention to the following points when inserting or coupling FPC.

SActuator Operation

Be careful not to apply excessive force when opening the actuator from the initial condition (prior to FPC

insertion). Also note that the deep insertion of a fingernail, finger, or something else could misshape the

contacts as indicated the diagrams below.

F

100

0.5MAX 0.5MAX

Connector

Board

1

As illustrated in the diagram below, the actuator rotates centered on an axis of rotation and the actuator

should be operated so that it rotates.

2

10

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

11

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

Precautions

The actuator is designed so that it does not open

more than 135 degrees. Do not apply force to make it

move back further. (Refer to the diagrams below.)

Excessive force will cause the lock lever to bend or

break. (Force should be 1 N or less.)

3

When operating the actuator, do so from

the center portion.

4

135°

As illustrated in the diagrams below, do not

take the actuator with your fingers and lift it

or pick it.

Doing so may cause damage. (Do not

perform any operations other than the

rotation operation previously described in

Step .)

5

SContact Orientation

This connector is a bottom-contact connector and the FPC conductor exposed surface is inserted facing

downward.

S FPC Insertion

There is an FPC positioning tab that requires the FPC to be inserted at an angle of about 10° with

respect to the board surface and perpendicular to the connector, and the FPC should be inserted firmly

all the way to the back.

Diagonal insertion of the FPC will result in a short-circuit fault due to a shift of the pitch, and the corner

of the FPC may catch on the contacts and cause the contacts to become misshapen.

2

10°

FPC temporary hold protrusion

1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

5

0

°

Precautions

SChecking the Locked Condition

When locking, check that the actuator is level with the board surface as illustrated in the diagram below.

Note that when the actuator is oriented in the vicinity of 0 degrees, measures should be taken so that an

excessive load is not applied. Such a load may cause contact misshaping. (Force should be 1 N or less.)

*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion space

at the time of board layout. Also note that insertion will be difficult when the FPC is too short and we ask

that due consideration be given to a suitable parts layout.

*Please contact the FPC manufacturer for information about the FPC bending qualities and breakage.

Precautions When Routing the FPC After FPC Coupling

SFPC Load

Be careful not to apply a load to the FPC after FPC mounting. Doing so may release the lock of the

connector or cause FPC disconnection or damage. Especially if a load is applied to the FPC in a

continuous manner, measures should be taken to anchor the FPC.

Also, with regard to routing the FPC, take measures not to abruptly bend the FPC in the vicinity of the

insertion area.

SFPC Insertionw

Do not insert the FPC on an angle from above.

As illustrated in the diagram below, when the FPC has been inserted on an angle during the FPC

insertion procedure, the FPC will bend and the pattern may break, or the FPC may not be inserted

sufficiently which will cause a conduction fault.

12

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

13

FH29B Series●0.2mm Contact Pitch, 1.2mm above the board, Flexible Printed Circuit ZIF Connectors

FPC temporary hold protrusion

135°

10°

Precautions

Precautions When Removing the FPC

SWhen releasing the actuator, release it in the vicinity of the center portion.

When the lock is closed with the FPC inserted, rotating the actuator from the tip could result in actuator

damage.

STo pull out the FPC, first release the actuator, then pull out the FPC.

There is an FPC positioning tab that requires the FPC to be pulled out at an angle of about 10° with

respect to the board surface.

Pulling out the FPC level with the board (at about 0˚), or applying a load of 5 N or greater to the connector

(FPC positioning cutout), introduces the possibility that the connector (FPC positioning cutout) will be

damaged.

Other Precautions

SHand Soldering Precautions

When hand soldering for repair or at other times, pay attention to the following matters.

Do not perform reflow or hand soldering with the FPC inserted in the connector.

Be careful not to apply excessive heat or touch the soldering iron anywhere other than the connector

leads. Doing so will cause the connector to become misshapen or melt.

Do not supply excessive solder (flux).

Supplying excessive solder (flux) to the contacts will cause the flux to adhere to the contacts or the

rotating portion of the actuator. This will cause a contact fault or trouble with the rotation operation of the

actuator. Also note that application of excessive solder to the reinforcement fittings will give rise to

breakdown of the rotation operation of the lock lever and will cause connector damage.

1

2

3

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.