Features * 2:1 Wide Input Range * 2kVDC/1 Second Isolation * -40C To +80C Operating Temperature @ Full Load Regulated Converters DC/DC Converter * Industry Standard Pinout (SIP8) * EN/UL62368 and UL60950 Certified, CB Report RSOE * Low Cost Description 1 Watt 3 SIP8 Single Output 3Y The RSOE is a low cost isolated, regulated and short-circuit protected DC/DC converter designed for industrial applications. A compact SIP8 case size, 2:1 input, 2kVDC isolation and a wide operating temperature range of -40C to +80C without derating makes the RSOE series ideal for industrial, transport and general-purpose on-board 5V power supplies. Industrial Class A EMC levels can be met with a simple Pi-filter and the converters come with a three year warranty. wa EAR rranty Selection Guide Part Number Input Voltage Range [VDC] Input Current @ full load [mA] Output Voltage [VDC] Output Current [mA] Efficiency typ. (1) [%] max. Capacitive Load (2) [F] 4.5 - 9 265 5 200 76 6800 18 - 36 52 5 200 80 6800 RSOE-0505S/H2 RSOE-2405S/H2 Notes: Note1: Efficiency is tested at nominal input and full load at +25C ambient Note2: Max. cap load is tested at nominal input and full resistive load Specifications (measured @ ta= 25C, nominal Vin, full load unless otherwise specified) E224736 BASIC CHARACTERISTICS Parameter Condition Min. Typ. Internal Input Filter capacitor Input Voltage Range nom. Vin= 5VDC 24VDC 4.5VDC 18VDC 5VDC 24VDC nom. Vin= 5VDC 24VDC 15VDC 50VDC nom. Vin= 5VDC 24VDC 40mA 3mA Maximum Reverse Voltage Input Surge Voltage Quiescent Current 100ms max. Start-up time 500s Rise time 450s Hold-up time 10s 9VDC 36VDC 0VDC UL62368-1 certified C22.2 No. 62368-1-14 certfied UL60950 certified C22.2 No. 60950-1-07 certified IEC/EN62368-1 certified EN55022/55024 compliant CB Report 130kHz Internal Operating Frequency Minimum Load Output Ripple and Noise (3) Max. 0% 20MHz BW, 0-100% load ON/OFF CTRL (4) DC-DC ON DC-DC OFF Input Current of CTRL Pin 5V VCTRL 3.3V VCTRL 75mVp-p Open or 0V<Vr<0.8VDC 2V<Vr<6VDC 15mA 10mA 0.75mA Standby Current 1.5mA Notes: Note3: Measurements are made with a 0.1F MLCC across output (low ESR) Note4: Please refer to Application and Installation" continued on next page www.recom-power.com REV.: 2/2017 ECO-1 RSOE DC/DC Converter Series Specifications (measured @ ta= 25C, nominal Vin, full load unless otherwise specified) Efficiency vs. Load RSOE-0505S/H2 100 80 Efficiency [%] 80 Efficiency [%] RSOE-2405S/H2 100 60 40 4.5Vin 5Vin 7Vin 9Vin 20 0 0 0.05 0.1 60 40 18Vin 20Vin 24Vin 30Vin 36Vin 20 0.15 0 0.2 0 0.05 0.1 0.15 0.2 Output Current [A] Output Current [A] REGULATIONS Parameter Condition Value Output Accuracy 0-100% load 2.0% max. Line Regulation low line to high line, full load 0.2% max. Load Regulation 0% to 100% load 0.5% max. Accuracy vs. Load (@ full load) RSOE-2405S/H2 0.7 0.5 0.6 0.4 Accuracy [%] Accuracy [%] RSOE-0505S/H2 0.6 0.3 0.2 0.4 0.3 0.2 0.1 0 0.5 0.1 0 0.05 0.1 0.15 0 0.2 0 0.05 0.1 0.15 0.2 Output Current [A] Output Current [A] PROTECTIONS Parameter Type Short Circuit Protection (SCP) Isolation Voltage (5) Value below 100mW I/P to O/P tested for 1 second Isolation Resistance continuous, auto recovery 2kVDC 1G min. Isolation Capacitance 100pF max. Insulation Grade functional continued on next page ECO-2 REV.: 2/2017 www.recom-power.com RSOE DC/DC Converter Series Specifications (measured @ ta= 25C, nominal Vin, full load unless otherwise specified) Surge Protection Circuit according to EN61000-4-5, Criteria A Fuse Dsurge C1 LOAD +Vin nom. Vin TVS C1 5VDC P4SMAJ11A N/A 24VDC P4SMAJ36A 220F/100V -Vin Notes: Note5: For repeat Hi-Pot testing, reduce the time and/or the test voltage Note6: An input fuse is required if the mains supply is not over-current protected. Recommended fuse: T1A slow blow type ENVIRONMENTAL Parameter Condition Operating Temperature Range Value without derating (see graph) -40C to +80C Maximum Case Temperature +105C Temperature Coefficient 0.05%/C Operating Altitude 5000m Operating Humidity non-condensing 5% - 95% RH max. Pollution Degree MTBF PD2 according to MIL-HDBK-217F, G.B. +25C +80C 3073 x 10 hours 845 x 103 hours 3 Vibration MIL-STD 202G Derating Graph (@ Chamber and natural convection 0.1m/s) Output Power [%] 100 80 60 40 20 0 -40 0 50 80 100 150 Ambient Temperature [C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Information Technology Equipment, General Requirements for Safety E224736-A48 Audio/Video, information and communication technology equipment - Safety requirements Audio/Video, information and communication technology equipment - Safety requirements (CB Scheme) L0339m37-CB-1-B1 RoHS2 Standard UL60950-1, 2nd Edition, 2014 CSA C22.2 No. 60950-1-07, 2nd Ed. 2014 UL62368-1, 2nd Edition, 2014 CSA C22.2 Nr. 62368-1-14, 2nd Ed. 2014 IEC/EN62368-1, 2nd Edition, 2014 RoHS 2011/65/EU + AM2015/863 continued on next page www.recom-power.com REV.: 2/2017 ECO-3 RSOE DC/DC Converter Series Specifications (measured @ ta= 25C, nominal Vin, full load unless otherwise specified) EMC Compliance Conditions Standard / Criterion with external components (see filter suggestion below) Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN55022, Class A EN55022, Class B Information technology equipment - Immunity characteristics - Limits and methods of measurement EN55024, 2015 ESD Electrostatic discharge immunity test 8kV Air; 4kV Contact IEC6100-4-2, Criteria A Radiated, radio-frequency, electromagnetic field immunity test 3V/m IEC6100-4-3, Criteria A Fast Transient and Burst Immunity DC Power Port: 0.5kV IEC6100-4-4, Criteria A Surge Immunity DC Power Port: 0.5kV IEC6100-4-5, Criteria A DC Power Port: 3V IEC6100-4-6, Criteria A IEC6100-4-8, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields Power Magnetic Field 50Hz, 1A/m EMC Filtering Suggestions for EN55022 Class A L1 +Vout +Vin C1 C2 -Vin -Vout nom. Vin C1 C2 L1 5VDC 22F/50V MLCC 22F/50V MLCC 3H Choke 24VDC EMC Filtering Suggestions for EN55022 Class B L1 +Vout +Vin C1 C2 -Vin -Vout C3 nom. Vin C1 5VDC 22F/50V MLCC 24VDC C2 C3 22F/50V 1000pF/3kV MLCC L1 0.45mH CMC DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Potting PCB non-conductive black plastic (UL94V-0) epoxy (UL94V-0) FR4 (UL94V-0) Package Dimension (LxWxH) 21.8 x 9.2 x 11.1mm Package Weight 4.7g typ. continued on next page ECO-4 REV.: 2/2017 www.recom-power.com RSOE DC/DC Converter Series Specifications (measured @ ta= 25C, nominal Vin, full load unless otherwise specified) Dimension Drawing (mm) embossed logo 5 6 7 8 11.1 1 2 3 9.2 Marking 0.50 4.1 21.8 0.51 Recommended Footprint Details NC= no connection Tolerance: xx.x= 0.5mm xx.xx= 0.25mm Pin dimension: 0.1mm 2.54 3.2 0.25 1.00 O +0.15/-0 Bottom View 2.0 Pin Connection Pin # Single 1 -Vin 2 +Vin 3 CTRL 5 NC 6 +Vout 7 -Vout 8 NC Top View 7x2.54= 17.78 2.54 INSTALLATION and APPLICATION ON/OFF CTRL Circuit +Vout +Vin 1N4148 VCTRL DC-DC ON: Open or 0V<Vr<0.8VDC DC-DC OFF: 2V<Vr<6V 68 -Vin -Vout PACKAGING INFORMATION Packaging Dimension (LxWxH) tube Packaging Quantity 520.0 x 11.2 x 18.2mm 22pcs Storage Temperature Range -55C to +125C Storage Humidity 5% - 95% RH max. The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 2/2017 ECO-5