RP20-2405SAW/P - RECOM Power

Features

Regulated

Converters

• Wide 2:1 Input Voltage Range

• 1.6kVDC Isolation

• UL Certiﬁed

• Efﬁciency up to 91%

• Six-Sided Continuous Shield

• No Minimum Load

PD-1

REV.: 1/2016www.recom-power.com

DC/DC Converter

Description

The RP20-A series are ultraminiature 2:1 input voltage range power DC/DC converters in a case half

the size of industry standard 20W converters. Despite their small size, the RP20-A converters are

fully speciﬁed devices with output currents up to 4.5 Amps, up to 91% efﬁciency, no minimum load,

1600VDC isolation, a built-in Class A EMC ﬁlter and low ripple/noise ﬁgures. The outputs are also fully

protected against short circuits, overcurrent and overvoltage. The no load input current is particularly

low (only 4mA/6mA).The RP20-A series will ﬁnd many uses in applications where board space and/or

board height is at a premium or in battery-powered systems where standby current is important.

E196683

20 Watt

1“ x 1“

Single & Dual

Output

RP20-A

Selection Guide

Part Number Input Output Output Input(1) Efﬁciency(1) Max. Capacitive

Voltage Range Voltage Current Current typ. Load(2)

[VDC] [VDC] [mA] [mA] [%] [µF]

RP20-123.3SA(3,4) 9-18 3.3 4500 1390 89 7000

RP20-1205SA(3,4) 9-18 5 4000 1873 89 5000

RP20-1212SA(3,4) 9-18 12 1670 1404 89 850

RP20-1215SA(3,4) 9-18 15 1330 1868 89 700

RP20-243.3SA(3,4) 18-36 3.3 4500 688 90 7000

RP20-2405SA(3,4) 18-36 5 4000 916 91 5000

RP20-2412SA(3,4) 18-36 12 1670 928 90 850

RP20-2415SA(3,4) 18-36 15 1330 913 91 700

RP20-483.3SA(3,4) 36-75 3.3 4500 344 90 7000

RP20-4805SA(3,4) 36-75 5 4000 463 90 5000

RP20-4812SA(3,4) 36-75 12 1670 464 90 850

RP20-4815SA(3,4) 36-75 15 1330 462 90 700

RP20-1212DA(3,4) 9-18 ±12 ±833 1872 89 ±500

RP20-1215DA(3,4) 9-18 ±15 ±667 1853 90 ±350

RP20-2412DA(3,4) 18-36 ±12 ±833 926 90 ±500

RP20-2415DA(3,4) 18-36 ±15 ±667 926 90 ±350

RP20-4812DA(3,4) 36-75 ±12 ±833 468 89 ±500

RP20-4815DA(3,4) 36-75 ±15 ±667 463 90 ±350

UL60950-1 Certiﬁed

Model Numbering

Ordering Examples

RP20-2405SA/P = 24V Input, 5V Output, Positive Logic CTRL pin and Trim pin ﬁtted

RP20-4812DA-HC = 48V Input, ±12V Output, Heat-sink ﬁtted

Input Voltage

Output Voltage

Single or Dual

RP20-__ __ _A/_ _

Package(4)

Control Logic(3)

Notes:

Note3: no sufﬁx for standard part without Trim or CTRL

add sufﬁx “P” for CTRL function with positive logic (1=ON, 0=OFF) and trim pin

add sufﬁx “N” for CTRL function with negative logic (0=ON, 1=OFF) and trim pin

Note4: add sufﬁx -HC for premounted Heat-sink and clips

Notes:

Note1: Values at nominal input voltage and full load

Note2: Test by minimum Vin and constant resistor load.

PD-2 REV.: 1/2016 www.recom-power.com

DC/DC Converter

RP20-A

Series

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range

nom. Vin = 12V

nom. Vin = 24V

nom. Vin = 48V

9VDC

18VDC

36VDc

12VDC

24VDC

48VDC

18VDC

36VDC

75VDC

Under Voltage Lockout (UVLO)

Vin = 12V DC-DC ON

DC-DC OFF 8VDC

9VDC

Vin = 24V DC-DC ON

DC-DC OFF 16VDC

18VDC

Vin = 48V DC-DC ON

DC-DC OFF 33VDC

36VDC

Input Filter Pi-Type

Input Reﬂected Ripple(5) nominal Vin and full load 30mAp-p

Input Surge Voltage

Vin =12V, 100ms max.

Vin = 24V, 100ms max.

Vin = 48V, 100ms max.

25VDC

50VDC

100VDC

Start-up time Power up

Remote ON/OFF

30ms

Operating Frequency Range 3.3Vout, 5Vout

Others

248kHz

297kHz

275kHz

330kHz

303kHz

363kHz

Minimum Load 0%

Optional Output Trim(6) ±10%

Ripple and Noise

measured by 20Mhz bandwidth

with a 1µF M/C X7R and a 10µF T/C Single 75mVp-p

measured by 20Mhz bandwidth

with a 1µF M/C X7R and a 10µF T/C

for each output

Dual 100mVp-p

Remote ON/OFF(6)

Positive Logic DC-DC ON

DC-DC OFF

Open or 3.0V < Vr < 15V

Short or 0V < Vr < 1.2V

Negative Logic DC-DC ON

DC-DC OFF

Short or 0V < Vr < 1.2V

Open or 3.0V < Vr < 15V

Input current of Remote pin (CTRL) DC-DC OFF 2mA

DC-DC ON -0.5mA 1.0mA

continued on next page

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

Notes:

Note5: Simulated source impedance of 12µH. 12µH inductor in series with +Vin.

Note6: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin.

If no sufﬁx is speciﬁed, the control pin will be omitted.

Efﬁciency vs. Output Current Efﬁciency vs. Input Voltage

9Vin

12Vin

18Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

Efficiency [%]

Input Voltage [VDC]

11 12 14 16 1810 13 15 17

RP20-1205SA

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

REGULATIONS

Parameter Condition Value

Output Voltage Accuracy ±1%

Voltage Adjustability Single ±10%

Line Voltage Regulation Single

Dual

±0.2%

±0.5%

Load Voltage Regulation

0% to 100% load Single

Dual

±0.2%

±1.0%

10% load to 90% load Single

Dual

±0.1%

±0.8%

Cross Regulation asymmetrical 25%<>100% load ±5%

Transient Response recovery time 25% load step change 250µs

continued on next page

RP20-A

Series

PD-3

REV.: 1/2016www.recom-power.com

Efﬁciency vs. Output Current

Efﬁciency vs. Input Voltage

18Vin

24Vin

36Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

36Vin

48Vin

75Vin

Efficiency [%]

Output Current [%]

20 40 60 80 10030 50 70 90

Efficiency [%]

Input Voltage [VDC]

22 24 28 32 3620 26 30 34

Efficiency [%]

Input Voltage [VDC]

44 48 56 64 68 7540 52 60 72

RP20-2405SA

RP20-4805SA

continued on next page

PD-4 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP20-A

Series

External Output Trimming

Trim up 1 2 3 4 5 6 7 8 9 10 %

Vout = 3.333 3.366 3.399 3.432 3.465 3.498 3.531 3.564 3.597 3.63 Volts

RU = 57.93 26.16 15.58 10.28 7.11 4.99 3.48 2.34 1.46 0.75 KOhms

Trim down 1 2 3 4 5 6 7 8 9 10 %

Vout = 3.267 3.234 3.201 3.168 3.135 3.102 3.069 3.036 3.003 2.97 Volts

RD = 69.47 31.23 18.49 12.12 8.29 5.74 3.92 2.56 1.50 0.65 KOhms

RP20-xx3.3S

Trim up 1 2 3 4 5 6 7 8 9 10 %

Vout = 5.05 5.10 5.15 5.20 5.25 5.30 5.35 5.4 5.45 5.50 Volts

RU = 36.57 16.58 9.92 6.58 4.59 3.25 2.30 1.59 1.03 0.59 KOhms

Trim down 1 2 3 4 5 6 7 8 9 10 %

Vout = 4.95 4.90 4.85 4.80 4.75 4.70 4.65 4.60 4.55 4.50 Volts

RD = 45.53 20.61 12.31 8.15 5.66 4.00 2.81 1.92 1.23 0.68 KOhms

Trim up 1 2 3 4 5 6 7 8 9 10 %

Vout = 12.12 12.24 12.36 12.48 12.60 12.72 12.84 12.96 13.08 13.20 Volts

RU = 367.91 165.95 98.64 64.98 44.78 31.32 21.70 14.49 8.88 4.39 KOhms

Trim down 1 2 3 4 5 6 7 8 9 10 %

Vout = 11.88 11.76 11.64 11.52 11.40 11.28 11.16 11.04 10.92 10.8 Volts

RD = 460.99 207.95 123.60 81.42 56.12 39.25 27.20 18.16 11.13 5.51 KOhms

Trim up 1 2 3 4 5 6 7 8 9 10 %

Vout = 15.15 15.3 15.45 15.60 15.75 15.90 16.05 16.20 16.35 16.50 Volts

RU = 404.18 180.59 106.06 68.80 46.44 31.53 20.88 12.90 6.69 1.72 KOhms

Trim down 1 2 3 4 5 6 7 8 9 10 %

Vout = 14.85 14.70 14.55 14.40 14.25 14.10 13.95 13.80 13.65 13.50 Volts

RD = 499.82 223.41 131.27 85.20 57.56 39.14 25.97 16.10 8.42 2.282 KOhms

RP20-xx05S

RP20-xx12S

RP20-xx15S

Output Voltage Trimming

Some single/dual output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using

external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing

these trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the

resis tor required or use a variable resistor to set the output voltage. Output can be externally trimmed by using the method shown below.

Trim up Trim down

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP20-A

Series

PD-5

REV.: 1/2016www.recom-power.com

Trim up 1 2 3 4 5 6 7 8 9 10 %

Vout = 24.24 24.48 24.72 24.96 25.20 25.44 25.68 25.92 26.16 26.40 Volts

RU = 218.21 98.10 58.07 38.05 26.04 18.03 12.32 8.03 4.69 2.02 KOhms

Trim down 1 2 3 4 5 6 7 8 9 10 %

Vout = 23.76 23.52 23.28 23.04 22.80 22.56 22.32 22.08 21.84 21.6 Volts

RD = 273.44 123.02 72.87 47.80 32.76 22.73 15.57 10.20 6.02 2.67 KOhms

Trim up 1 2 3 4 5 6 7 8 9 10 %

Vout = 30.30 30.60 30.90 31.20 31.50 31.80 32.10 32.40 32.70 33.00 Volts

RU = 268.29 120.64 71.43 46.82 32.06 22.21 15.10 9.91 5.81 2.53 KOhms

Trim down 1 2 3 4 5 6 7 8 9 10 %

Vout = 29.70 29.40 29.10 28.80 28.50 28.20 27.90 27.60 27.30 27.00 Volts

RD = 337.71 152.02 90.13 59.18 40.61 28.23 19.39 12.76 7.60 3.47 KOhms

RP20-xx12D

RP20-xx15D

Dual Output Voltage Trim Tables

PROTECTIONS

Parameter Condition Value

Short Circuit Protection (SCP) continuous, automatic recovery

Over Voltage Protection (OVP) Zener Diode Clamp

3.3Vout

5Vout

12Vout

15Vout

3.7VDC - 5.4VDC

5.6VDC - 7.0VDC

13.5VDC - 19.6VDC

16.8VDC - 20.5VDC

Over Load Protection (OLP) % Iout rated; Hiccup mode 150% typ.

Isolation Voltage I/P to O/P

I/P to O/P to case

1.6kVDC/1minute

1.0kVDC/1 minute

Isolation Resistance 500 VDC 1GΩ min.

Isolation Capacitance 1500pF max.

Notes:

Note7: This power module is not internally fused. An input line fuse must always be used.

PD-6 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP20-A

Series

SAFETY AND CERTIFICATIONS

Certiﬁcate Type (Safety) Condition Standard

UL General Safety E196683 UL60950-1 1st Ed.: 2003

C22.2 No. 60950 1st. Ed.: 2003

EMC Compliance Condition Standard / Criterion

EMI Standard (10) with external ﬁlter EN55022, Class A, Class B

ESD

Radiated Immunity

Fast Transient(11)

Surge(11)

Conducted Immunity

Air ±8kV and Contact ±6kV

10 V/m

±2kV

10 Vr.m.s

EN61000-4-2, Criteria A

EN61000-4-3, Criteria A

EN61000-4-4, Criteria A

EN61000-4-5, Criteria A

EN61000-4-6, Criteria A

continued on next page

ENVIRONMENTAL

Parameter Condition

Value

Operating Temperature Range without derating

with derating

-40°C to +70°C

-40°C to +102°C

Maximum Case Temperature +105°C

Operating Humidity 5% - 95% RH

Temperature Coefﬁcient ±0.02%/°C max.

Thermal Impedance Natural convection (20LFM)

Natural convection (20LFM) with Heat-sink

17,6°C/Watt

14.8°C/Watt

Thermal Shock MIL-STD-810F

Vibration MIL-STD-810F

MTBF MIL-HDBK-217F

Bellcore TR-NWT-000332(8)

1477 x 103 hours

1766 x 103 hours

-40 60 80

70 100

102 12040

200-20

100

Ambient Temperature [°C]

Output Power [%]

-40 60 80

76 100

102 12040

200-20

100

Ambient Temperature [°C]

Output Power [%]

Derating Graph(10)

Notes:

Note8: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C.

MIL-HDBK 217F Notice 2. Ta = 25°C, full load, (Ground, Benign, controlled environment).

Note9: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-

number not shown here please contact our technical support service at techsupportAT@recom-power.com

RP20-2415SA RP20-2415SA with Heat-sink

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP20-A

Series

PD-7

REV.: 1/2016www.recom-power.com

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

Input

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

LOAD

+VOUT

COM

-VOUT

LOADLOAD

Fuse

C2C1

+VIN

+VOUT

-VOUT

-VIN

EMI Filtering Class B

MODEL C1 C2 C3 C4/C5 L1

RP20-12xxSA 4.7µF/25V

1812 MLCC N/A N/A 470pF/2kV

1808 MLCC

CMC: 325µH

ref.: WE 744290321

ref.: CMC-06

RP20-24xxSA 4.7µF/25V

1812 MLCC N/A N/A 470pF/2kV

1808 MLCC

CMC: 325µH

ref.: WE 744290321

ref.: CMC-06

RP20-48xxSA 2.2µF/100V

1812 MLCC

2.2µF/100V

1812 MLCC

2.2µF/100V

1812 MLCC

470pF/2kV

1808 MLCC

CMC: 325µH

ref.: WE 744290321

ref.: CMC-06

DIMENSIONS and PHYSICAL CHARACTERISTICS

Parameter Type Value

Material

Case

Base

Potting

Nickel coated copper

FR4 PCB

Silicone (UL94 V-0)

Packaging Dimension (LxWxH) without Heat-sink

with Heat-sink

25.4 x 25.4 x 9.9mm

31.4 x 25.4 x 16.5mm

Packaging Weight without Heat-sink

with Heat-sink

15g

21.44g

continued on next page

Notes:

Note10: The standard modules meet EMI Class A or Class B with external components, see ﬁlter suggestions below.

Note11: An external input ﬁlter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The ﬁlter capacitor Recom

suggests: Nippon chemi-con KY series, 220µF/100V.

PD-8 REV.: 1/2016 www.recom-power.com

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP20-A

Series

Pin Connections

Pin # Single Dual

1 +Vin +Vin

2 -Vin -Vin

3 CTRL CTRL

4 +Vout +Vout

5 Trim Com

6 -Vout -Vout

Pin Pitch Tolerance ±0.25mm

Pin dimension tolerance ±0.1mm

XX.X ± 0.5mm

XX.XX ± 0.25mm

Dimension Drawing (mm)

Dimension Drawing (mm) with Heat-sink

4 6

1 2

Bottom View

Standard

4 6

1 2

Bottom View

CTRL version

25.4

5.6 9.9

20.32

25.4

Ø 1.0

20.32

2.54

20.32

5.08

10.16 10.16

5.08

2.54

Top View

Ø1.60 +0.15/-0

2.54

25.4

31.4

5.60 9.90

16.5

20.32

25.4

Ø 1.0 2.54

24.20

Top View

Heat-sink

5.85

PACKAGING INFORMATION

Parameter Type Value

Packaging Quantity without Heat-sink

with Heat-sink

Tube

Tray

8pcs.

20pcs.

Storage Temperature Range -55°C to +125°C

Storage Humidity 5% - 95% RH

The product information and speciﬁcations are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written

consent. A safety-critical application is deﬁned as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inﬂict bodily harm or damage property. The buyer

shall indemnify and hold harmless RECOM, its afﬁliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications.

DC/DC Converter

Speciﬁcations measured at Ta = 25°C, nominal input voltage, full load otherwise noted

RP20-A

Series

PD-9

REV.: 1/2016www.recom-power.com

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

RECOM:

RP20-2415DA/P RP20-4805SAW/N RP20-4812DA-HC RP20-2415SA/P-HC RP20-4812SAW RP20-4812DAW-HC

RP20-4812SA/P RP20-1212SA RP20-4815DA/N RP20-2415SAW-HC RP20-2412DA/P-HC RP20-4815DA/P-HC

RP20-1212DA/P RP20-1215DA/P-HC RP20-483.3SA RP20-2412SA-HC RP20-123.3SA-HC RP20-2415SA/N

RP20-243.3SAW/P RP20-1205SA/N-HC RP20-2415DAW/P-HC RP20-1212SA/P RP20-4815SA-HC RP20-

2412DAW/P-HC RP20-4812SAW/P RP20-2405SAW RP20-4815DAW-HC RP20-2412SA/N-HC RP20-4815SA/N-HC

RP20-123.3SA/N-HC RP20-483.3SAW/P-HC RP20-4815SAW/P RP20-2415DA RP20-4805SA RP20-4815DAW/N

RP20-2412DAW/N RP20-2405SA/N-HC RP20-1212DA/N-HC RP20-4815SAW/N-HC RP20-483.3SAW RP20-

243.3SA/N-HC RP20-483.3SA/P RP20-4815DAW/P-HC RP20-4812DA/P-HC RP20-123.3SA/N RP20-2405SAW/P

RP20-4805SAW/P-HC RP20-4812DAW/N-HC RP20-1215SA/N RP20-4805SA/P RP20-2405SA-HC RP20-4805SAW

RP20-2415SAW/N RP20-4815DA RP20-1215SA/P-HC RP20-2412DA/P RP20-1215DA RP20-2412SA/N RP20-

4812SA/N-HC RP20-1205SA-HC RP20-2415DAW RP20-2412SAW/N-HC RP20-2412DA RP20-243.3SA-HC RP20-

2415DAW/P RP20-4812DA/N RP20-2415SA RP20-4815SAW-HC RP20-4812SAW/N-HC RP20-1212SA/N-HC

RP20-4812SA-HC RP20-4815SA/N RP20-243.3SAW-HC RP20-483.3SA/N-HC RP20-2405SA/N RP20-

243.3SAW/N-HC RP20-243.3SA/N RP20-4815DA/P RP20-2412DAW RP20-4812DAW/N RP20-1215DA/P RP20-

2415SA/P RP20-2412SAW-HC RP20-1212DA-HC RP20-2415SAW/P-HC RP20-1205SA/N RP20-123.3SA/P-HC

RP20-4805SAW/P RP20-1215SA RP20-1212SA-HC RP20-4815SA/P-HC RP20-2412SA/P RP20-4812SA/P-HC

RP20-243.3SAW/N RP20-4805SA/N-HC RP20-4815DAW/P RP20-2415DA-HC RP20-2415DAW/N-HC RP20-

4815SAW/N RP20-4812DA