AXK(5(S)/6(S)) NARROW PITCH (0.5mm) CONNECTORS P5 SERIES -- P5K, P5KS -- NARROW-PITCH CONNECTORS FOR BOARD-TO-BOARD CONNECTION 2) V notch construction used for excellent resistance against foreign matters. (P5KS: Available from Nov. 2005) * P5K Socket What is V notch construction? Header By using the edge for the contacting part and increasing contact pressure per unit area, the effectiveness in removing flux and contaminants is increased compared to its predecessor. This is also effective in preventing the trapping of contaminants. * P5KS [Cross section of contacting part] Socket Without notch Socket side contact cross section Header With V notch Note) The external appearance and PC board pattern differs for the P5K and P5KS series. Header side contact cross section FEATURES 3) Use of Ni barrier construction is standard. Highly effective against solder creeping. (P5KS: Available from Nov. 2005) 1. The product lineup consists of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 8.0 mm, and 9.0 mm. Type P5K P5KS Mated height 3 mm, 3.5 mm 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm, 7 mm, 8 mm, 9 mm The external appearance and PC board pattern differs for the P5K and P5KS series. [Contact] Ni barrier Header side contact Cu Ni 4 constructions Cross section of socket side contact P5KS V notch construction -- Ni barrier construction -- Porosity treatment Note) Note) Note: P5KS will support V notch and Ni barrier from November, 2005, and will have TOUGH CONTACT construction. 1) Contacts are highly resistant to shock caused by dropping and employ our original bellows contact construction. Au Exposed Ni part Socket side contact Effective mating length Type P5K P5KS Effective mating length 0.75 mm 1.0 mm 4. Automatic mounting 1) Suction area for suction-type automatic mounting machines is employed. Suction face By providing an exposed nickel part on the gold (Au) plated contact, solder creeping is prevented despite the ultra low profile. 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. Bellows contact construction With long effective mating lengths, even if the connection is not perfect, the electrical connection is more than enough for normal operations. What is Ni barrier construction? Notes P5K 3. Even with the low profile, the effective mating length has been extended to ensure that there is some latitude in the mating. Note: Construction makes solder creeping difficult because header side is formed at the same time. 4) Porosity treatment applied for improved resistance against corrosion. What is porosity treatment? This treatment consists of coating the surface with a very thin film to seal pinholes in the gold plating. This porosity treatment technology ensures the same contact reliability for thin gold plating as that of thick gold plating. P5K Header P5K Socket 5. Compliance with RoHS' Directive Environmentally friendly, the connectors' comply with Europe's RoHS' Directive. Cadmium, lead, mercury, hexavalent, chromium, PBB and PBDE are not used. APPLICATIONS 1. Mobile phones, PHS, mobile infocommunications terminals, and other small portable devices 2. The 160-contacts connector: This connector is particularly suited to the motherboard, CPU board, and other multi-pin expansion boards on notebook PCs and other info-communications applications. Porosity treatment film * What is meant by "bellows type" contact? Rather than two broken-out surfaces, the contact is formed by the surfaces of two rolled plates. This helps the contact hold up better to repeated insertions and removals, while at the same time achieving highly reliable contact. The roll surfaces are in contact with each other, providing high contact reliability. Since the contact is formed by bending thin plate, it has a spring-like quality. This construction helps make it resistant to dropping and twisting. Au plating Pinholes Surrounding gas Ni plating Base material Improvement in insertion/removal durability Improvement in resistance to corrosion Improvement in contact reliability for digital signals All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. CPU boards and other multi-pin expansion boards. Mother board AXK(5(S)/6(S)) TABLE OF PRODUCT TYPES Socket Header Socket P5K Product name Mated height Header P5KS P5K 3.0mm 3.5mm P5KS 4.0mm 4.5mm 5.0mm 5.5mm 6.0mm 6.5mm 7.0mm 8.0mm 9.0mm Number of contacts 20 22 24 30 34 36 40 50 60 70 80 100 120 130 160 Notes: 1. The standard type comes without positioning bosses. (Positioning bosses come standard on types with 4.0 mm and 4.5 mm mated height with 120 and 160 contacts, and 6.5 mm mated height with 130 contacts.) Connectors with positioning boss are available for on-demand production. 2. Please consult us for products which have no mark. ORDERING INFORMATION 1. P5K (3.0 mm and 3.5 mm) AXK 5: Narrow Pitch Connector P5K Socket 6: Narrow Pitch Connector P5K Header Number of contacts (2 digits) Mated height 1: For mated height 3.0 mm and 3.5 mm

2: For mated height 3.5 mm 3: For mated height 3.0 mm Functions 3: With positioning bosses 4: Without positioning bosses Surface treatment (Contact portion / Terminal portion) 5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface Packing J: 1,500 pieces embossed tape and paper reel x 2 P: 1,000 pieces embossed tape and paper reel x 2 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. AXK(5(S)/6(S)) 2. P5KS (4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 8.0 mm and 9.0 mm) AXK 5S: Narrow Pitch Connector P5KS Socket 6S: Narrow Pitch Connector P5KS Header Number of contacts (2 digits) Mated height 0: For mated height 4.0 mm, 5.0 mm and 6.0 mm 2: For mated height 4.5 mm, 5.5 mm and 6.5 mm 3: For mated height 7.0 mm, 8.0 mm and 9.0 mm

4: For mated height 4.0 mm, 4.5 mm and 7.0 mm 5: For mated height 5.0 mm, 5.5 mm and 8.0 mm 6: For mated height 6.0 mm, 6.5 mm and 9.0 mm Functions 3: With positioning boss and direction for protection from reverse mating 4: Without positioning boss/with direction for protection from reverse mating 7: With positioning boss/without direction for protection from reverse mating 8: Without positioning boss and direction for protection from reverse mating Surface treatment (Contact portion / Terminal portion) 0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Previous model: Ni plating on base, SnPb plating on surface of terminal portion) 5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface 7: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (for Ni barrier product available from Nov. 2005) Contact portion Nil: Without V notch product Y: V notch type product (chamfered on both sides) (Available from Nov. 2005)

Nil: Without V notch product Y: V notch type product (Available from Nov. 2005) Packing G: 1,500 pieces embossed tape and plastic reel x 2 Socket: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm Header: Mated heights 4.0 mm, 4.5 mm, 7.0 mm 1,000 pieces plastic reel x 2 Socket: Mated heights 7.0 mm, 8.0 mm, 9.0 mm Header: Mated heights 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 8.0 mm, 9.0 mm J: 1,500 pieces embossed tape and paper reel x 2 P: 1,000 pieces embossed tape and paper reel x 2 Notes: 1. Models with mating directionality to prevent reverse insertion have over 100 contacts. Models without mating directionality to prevent reverse insertion have less than 100 contacts. 2. The plating on the solder terminal portion has changed from SnPb to Au plating from the production lot of December, 2002, in order to eliminate lead. 3. Only "J" and "P" are supported as packaging specifications for models without Ni barrier. The packaging specification for Ni barrier models is "G" only. Models possible for "J" are as follows: Sockets: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, and 6.5 mm Headers: Mated heights 4.0 mm, 4.5 mm, and 7.0 mm All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. AXK(5(S)/6(S)) PRODUCT TYPES 1. P5K Product name Mated height 3.0 mm P5K 3.5 mm Part No. Packing No. of contacts Socket Header 20 AXK520145J AXK620345J 22 AXK522145J AXK622345J 30 AXK530145J AXK630345J 40 AXK540145J AXK640345J 50 AXK550145J AXK650345J 60 AXK560145J AXK660345J 70 AXK570145J AXK670345J 80 AXK580145J AXK680345J 100 AXK500145J AXK600345J 120 AXK5A2145J AXK6A2345J 20 AXK520145J AXK620245J 22 AXK522145J AXK622245J 30 AXK530145J AXK630245J 40 AXK540145J AXK640245J 50 AXK550145J AXK650245J 60 AXK560145J AXK660245J 70 AXK570145J AXK670245J 80 AXK580145J AXK680245J 100 AXK500145J AXK600245J 120 AXK5A2145J AXK6A2245J Inner carton (1 reel) Outer carton 1,500 pieces Note 1) 3,000 pieces Note 1) Notes) 1. For the protection of our environment, orders of J: Inner carton (1 reel) 1,500 pcs. units are recommended to reduce packaging materials. In addition, orders of P: Inner carton (1 reel) 1,000 pcs. units with embossed tape packaging are also available; to order change the suffix "J" to the suffix "P." 2. Regarding ordering units: During production: Please make orders in 1 reel units. Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See "Regarding sample orders to confirm proper mounting" on page 13.) Samples: Small lot orders are possible. Change the suffix "J" to the suffix "P". 3. The standard type comes without positioning bosses. Connectors with positioning bosses are available on-demand production. For P5K type of 8th digit of the part no. changes from 4 to 3. e.g. Mated height 3.0 mm, 20 contacts for sockets: AXK520135P All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. AXK(5(S)/6(S)) 2. P5KS Part No. Socket Product name Mated height 4.0 mm No. of contacts Without V notch and Ni barrier product (Paper reel) Without V notch and Ni barrier product (Paper reel) (Paper reel) (Recommendation) 20 AXK5S20045* AXK5S20047YG (From Nov. 2005) AXK6S20445* AXK6S20447YG (From Nov. 2005) 24 AXK5S24045* AXK5S24047YG (From Nov. 2005) AXK6S24445* AXK6S24447YG (From Nov. 2005) 30 AXK5S30045* AXK5S30047YG (From Nov. 2005) AXK6S30445* AXK6S30447YG (From Nov. 2005) 40 AXK5S40045* AXK5S40047YG (From Nov. 2005) AXK6S40445* AXK6S40447YG (From Nov. 2005) 50 AXK5S50045* AXK5S50047YG (From Nov. 2005) AXK6S50445* AXK6S50447YG (From Nov. 2005) 60 AXK5S60045* AXK5S60047YG (From Nov. 2005) AXK6S60445* AXK6S60447YG (From Nov. 2005) 70 AXK5S70045* AXK5S70047YG (From Nov. 2005) AXK6S70445* AXK6S70447YG (From Nov. 2005) 80 AXK5S80045* AXK5S80047YG (From Nov. 2005) AXK6S80445* AXK6S80447YG (From Nov. 2005) 100 AXK5S00045* AXK5S00047YG (From Nov. 2005) AXK6S00445* AXK6S00447YG (From Nov. 2005) 120 AXK5SA2075* AXK5SA2077YG (From Nov. 2005) AXK6SA2475* AXK6SA2477YG (From Nov. 2005) AXK5SA6075* AXK5SA6077YG (From Nov. 2005) AXK6SA6475* AXK6SA6477YG (From Nov. 2005) 20 AXK5S20245* AXK5S20247YG (From Nov. 2005) AXK6S20445* AXK6S20447YG (From Nov. 2005) 24 AXK5S24245* AXK5S24247YG (From Nov. 2005) AXK6S24445* AXK6S24447YG (From Nov. 2005) 30 AXK5S30245* AXK5S30247YG (From Nov. 2005) AXK6S30445* AXK6S30447YG (From Nov. 2005) 36 AXK5S36245* AXK5S36247YG (From Nov. 2005) AXK6S36445* AXK6S36447YG (From Nov. 2005) 40 AXK5S40245* AXK5S40247YG (From Nov. 2005) AXK6S40445* AXK6S40447YG (From Nov. 2005) 50 AXK5S50245* AXK5S50247YG (From Nov. 2005) AXK6S50445* AXK6S50447YG (From Nov. 2005) 60 AXK5S60245* AXK5S60247YG (From Nov. 2005) AXK6S60445* AXK6S60447YG (From Nov. 2005) 70 AXK5S70245* AXK5S70247YG (From Nov. 2005) AXK6S70445* AXK6S70447YG (From Nov. 2005) 80 AXK5S80245* AXK5S80247YG (From Nov. 2005) AXK6S80445* AXK6S80447YG (From Nov. 2005) 100 AXK5S00245* AXK5S00247YG (From Nov. 2005) AXK6S00445* AXK6S00447YG (From Nov. 2005) 120 AXK5SA2275* AXK5SA2277YG (From Nov. 2005) AXK6SA2475* AXK6SA2477YG (From Nov. 2005) 160 AXK5SA6275* AXK5SA6277YG (From Nov. 2005) AXK6SA6475* AXK6SA6477YG (From Nov. 2005) 20 AXK5S20045* AXK5S20047YG (From Nov. 2005) AXK6S20545P AXK6S20547YG (From Nov. 2005) 30 AXK5S30045* AXK5S30047YG (From Nov. 2005) AXK6S30545P AXK6S30547YG (From Nov. 2005) 34 AXK5S34045* AXK5S34047YG (From Nov. 2005) AXK6S34545P AXK6S34547YG (From Nov. 2005) 40 AXK5S40045* AXK5S40047YG (From Nov. 2005) AXK6S40545P AXK6S40547YG (From Nov. 2005) 50 AXK5S50045* AXK5S50047YG (From Nov. 2005) AXK6S50545P AXK6S50547YG (From Nov. 2005) 60 AXK5S60045* AXK5S60047YG (From Nov. 2005) AXK6S60545P AXK6S60547YG (From Nov. 2005) 70 AXK5S70045* AXK5S70047YG (From Nov. 2005) AXK6S70545P AXK6S70547YG (From Nov. 2005) 80 AXK5S80045* AXK5S80047YG (From Nov. 2005) AXK6S80545P AXK6S80547YG (From Nov. 2005) 100 AXK5S00045* AXK5S00047YG (From Nov. 2005) AXK6S00545P AXK6S00547YG (From Nov. 2005) 160 P5KS 4.5 mm 5.0 mm (Paper reel) (Recommendation) Packing Header All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. Inner carton (1 reel) Outer carton Note 2) "Asterisk" mark on end of part No.; J: 1,500 pieces P: 1,000 pieces Note 2) "Asterisk" mark on end of part No.; J: 3,000 pieces P: 2,000 pieces "G" mark on end of part No.; 1,500 pieces "G" mark on end of part No.; 3,000 pieces Note 2) "Asterisk" mark on end of part No.; J: 1,500 pieces P: 1,000 pieces Note 2) "Asterisk" mark on end of part No.; J: 3,000 pieces P: 2,000 pieces "G" mark on end of "G" mark on end of part No.; part No.; Socket: 1,500 pieces Socket: 3,000 pieces Header: 1,000 pieces Header: 2,000 pieces AXK(5(S)/6(S)) Part No. Socket Product name Mated height 5.5 mm No. of contacts Without V notch and Ni barrier product (Paper reel) Without V notch and Ni barrier product (Paper reel) (Paper reel) (Recommendation) 20 AXK5S20245* AXK5S20247YG (From Nov. 2005) AXK6S20545P AXK6S20547YG (From Nov. 2005) 30 AXK5S30245* AXK5S30247YG (From Nov. 2005) AXK6S30545P AXK6S30547YG (From Nov. 2005) 34 AXK5S34245* AXK5S34247YG (From Nov. 2005) AXK6S34545P AXK6S34547YG (From Nov. 2005) 40 AXK5S40245* AXK5S40247YG (From Nov. 2005) AXK6S40545P AXK6S40547YG (From Nov. 2005) 50 AXK5S50245* AXK5S50247YG (From Nov. 2005) AXK6S50545P AXK6S50547YG (From Nov. 2005) 60 AXK5S60245* AXK5S60247YG (From Nov. 2005) AXK6S60545P AXK6S60547YG (From Nov. 2005) 70 AXK5S70245* AXK5S70247YG (From Nov. 2005) AXK6S70545P AXK6S70547YG (From Nov. 2005) 80 AXK5S80245* AXK5S80247YG (From Nov. 2005) AXK6S80545P AXK6S80547YG (From Nov. 2005) 100 AXK5S00245* AXK5S00247YG (From Nov. 2005) AXK6S00545P AXK6S00547YG (From Nov. 2005) 20 AXK5S20045* AXK5S20047YG (From Nov. 2005) AXK6S20645P AXK6S20647YG (From Nov. 2005) 30 AXK5S30045* AXK5S30047YG (From Nov. 2005) AXK6S30645P AXK6S30647YG (From Nov. 2005) 40 AXK5S40045* AXK5S40047YG (From Nov. 2005) AXK6S40645P AXK6S40647YG (From Nov. 2005) 50 AXK5S50045* AXK5S50047YG (From Nov. 2005) AXK6S50645P AXK6S50647YG (From Nov. 2005) 60 AXK5S60045* AXK5S60047YG (From Nov. 2005) AXK6S60645P AXK6S60647YG (From Nov. 2005) 70 AXK5S70045* AXK5S70047YG (From Nov. 2005) AXK6S70645P AXK6S70647YG (From Nov. 2005) 80 AXK5S80045* AXK5S80047YG (From Nov. 2005) AXK6S80645P AXK6S80647YG (From Nov. 2005) 100 AXK5S00045* AXK5S00047YG (From Nov. 2005) AXK6S00645P AXK6S00647YG (From Nov. 2005) 20 AXK5S20245* AXK5S20247YG (From Nov. 2005) AXK6S20645P AXK6S20647YG (From Nov. 2005) 30 AXK5S30245* AXK5S30247YG (From Nov. 2005) AXK6S30645P AXK6S30647YG (From Nov. 2005) 40 AXK5S40245* AXK5S40247YG (From Nov. 2005) AXK6S40645P AXK6S40647YG (From Nov. 2005) 50 AXK5S50245* AXK5S50247YG (From Nov. 2005) AXK6S50645P AXK6S50647YG (From Nov. 2005) 60 AXK5S60245* AXK5S60247YG (From Nov. 2005) AXK6S60645P AXK6S60647YG (From Nov. 2005) 70 AXK5S70245* AXK5S70247YG (From Nov. 2005) AXK6S70645P AXK6S70647YG (From Nov. 2005) 80 AXK5S80245* AXK5S80247YG (From Nov. 2005) AXK6S80645P AXK6S80647YG (From Nov. 2005) 100 AXK5S00245* AXK5S00247YG (From Nov. 2005) AXK6S00645P AXK6S00647YG (From Nov. 2005) 130 AXK5SA3275* AXK5SA3277YG (From Nov. 2005) AXK6SA3675P AXK6SA3677YG (From Nov. 2005) 20 AXK5S20340P AXK5S20347YG (From Nov. 2005) AXK6S20445* AXK6S20447YG (From Nov. 2005) 30 AXK5S30340P AXK5S30347YG (From Nov. 2005) AXK6S30445* AXK6S30447YG (From Nov. 2005) 40 AXK5S40340P AXK5S40347YG (From Nov. 2005) AXK6S40445* AXK6S40447YG (From Nov. 2005) 50 AXK5S50340P AXK5S50347YG (From Nov. 2005) AXK6S50445* AXK6S50447YG (From Nov. 2005) 60 AXK5S60340P AXK5S60347YG (From Nov. 2005) AXK6S60445* AXK6S60447YG (From Nov. 2005) 70 AXK5S70340P AXK5S70347YG (From Nov. 2005) AXK6S70445* AXK6S70447YG (From Nov. 2005) 80 AXK5S80340P AXK5S80347YG (From Nov. 2005) AXK6S80445* AXK6S80447YG (From Nov. 2005) 100 AXK5S00340P AXK5S00347YG (From Nov. 2005) AXK6S00445* AXK6S00447YG (From Nov. 2005) 6.0 mm P5KS 6.5 mm (Paper reel) (Recommendation) Packing Header 7.0 mm Inner carton (1 reel) Outer carton Note 2) "Asterisk" mark on end of part No.; J: 1,500 pieces P: 1,000 pieces Note 2) "Asterisk" mark on end of part No.; J: 3,000 pieces P: 2,000 pieces "G" mark on end of "G" mark on end of part No.; part No.; Socket: 1,500 pieces Socket: 3,000 pieces Header: 1,000 pieces Header: 2,000 pieces Note 2) "Asterisk" mark on end of part No.; J: 1,500 pieces P: 1,000 pieces Note 2) "Asterisk" mark on end of part No.; J: 3,000 pieces P: 2,000 pieces "G" mark on end of "G" mark on end of part No.; part No.; Socket: 1,000 pieces Socket: 2,000 pieces Header: 1,500 pieces Header: 3,000 pieces All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. AXK(5(S)/6(S)) Part No. Socket Product name Mated height No. of contacts Without V notch and Ni barrier product (Paper reel) (Paper reel) (Recommendation) Packing Header Without V notch and Ni barrier product (Paper reel) (Paper reel) (Recommendation) 20 AXK5S20340P AXK5S20347YG (From Nov. 2005) AXK6S20545P AXK6S20547YG (From Nov. 2005) 30 AXK5S30340P AXK5S30347YG (From Nov. 2005) AXK6S30545P AXK6S30547YG (From Nov. 2005) 40 AXK5S40340P AXK5S40347YG (From Nov. 2005) AXK6S40545P AXK6S40547YG (From Nov. 2005) 50 AXK5S50340P AXK5S50347YG (From Nov. 2005) AXK6S50545P AXK6S50547YG (From Nov. 2005) 60 AXK5S60340P AXK5S60347YG (From Nov. 2005) AXK6S60545P AXK6S60547YG (From Nov. 2005) 70 AXK5S70340P AXK5S70347YG (From Nov. 2005) AXK6S70545P AXK6S70547YG (From Nov. 2005) 80 AXK5S80340P AXK5S80347YG (From Nov. 2005) AXK6S80545P AXK6S80547YG (From Nov. 2005) 100 AXK5S00340P AXK5S00347YG (From Nov. 2005) AXK6S00545P AXK6S00547YG (From Nov. 2005) 20 AXK5S20340P AXK5S20347YG (From Nov. 2005) AXK6S20645P AXK6S20647YG (From Nov. 2005) 30 AXK5S30340P AXK5S30347YG (From Nov. 2005) AXK6S30645P AXK6S30647YG (From Nov. 2005) 40 AXK5S40340P AXK5S40347YG (From Nov. 2005) AXK6S40645P AXK6S40647YG (From Nov. 2005) 50 AXK5S50340P AXK5S50347YG (From Nov. 2005) AXK6S50645P AXK6S50647YG (From Nov. 2005) 60 AXK5S60340P AXK5S60347YG (From Nov. 2005) AXK6S60645P AXK6S60647YG (From Nov. 2005) 70 AXK5S70340P AXK5S70347YG (From Nov. 2005) AXK6S70645P AXK6S70647YG (From Nov. 2005) 80 AXK5S80340P AXK5S80347YG (From Nov. 2005) AXK6S80645P AXK6S80647YG (From Nov. 2005) 100 AXK5S00340P AXK5S00347YG (From Nov. 2005) AXK6S00645P AXK6S00647YG (From Nov. 2005) 8.0 mm P5KS 9.0 mm Inner carton (1 reel) Outer carton 1,000 pieces 2,000 pieces Notes) 1. Regarding ordering units: During production: Please make orders in 1 reel units. Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See "Regarding sample orders to confirm proper mounting" on page 13.) Samples: Small lot orders are possible. For models without V notch and Ni barrier, change the suffix "J" to the suffix "P," or place a "P" where the "*" is located. For V notch and Ni barrier models add "G" at the end of the part number. 2. The standard type comes without positioning bosses (However, mated heights of 4 mm or higher and 120 pins or more comes standard with bosses). Connectors with positioning bosses are available for on-demand production. For P5KS type of 9th digit of the part no. changes from 4 to 3. e.g. Mated height 4.0 mm, 20 contacts for sockets: AXK5S20037G All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. AXK(5(S)/6(S)) SPECIFICATIONS 1. Characteristics Specifications Item 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm type 3mm, 3.5mm type Rated current 0.5A/terminal (Max. 10A) 60V AC/DC Breakdown voltage Insulation resistance Contact resistance Mechanical characteristics Using 500V DC megger Max. 0.785N {80gf} x no. of contacts (initial) Min. 0.0588N {6gf} x no. of contacts Saltwater spray resistance (header and socket mated) -55C to +85C No freezing at low temperatures Max. peak temperature of 245C Infrared reflow soldering 300C within 5 sec. Soldering iron insulation resistance min. 100M, contact resistance max. 60m 5 cycles, insulation resistance min. 100M, contact resistance max. 80m 120 hours, insulation resistance min. 100M, contact resistance max. 60m 120 hours, insulation resistance min. 100M, contact resistance max. 80m 5 cycles, 24 hours, 24 hours, insulation resistance min. 100M, contact resistance max. 60m H2S resistance (header and socket mated) 48 hours, contact resistance max. 60m Insertion and removal life 50 times 48 hours, Sequence 1. -55 -30 C, 30 minutes 2. ~ , Max. 5 minutes 3. 85 +30 C, 30 minutes 4. ~ , Max. 5 minutes Bath temperature 402C, humidity 90 to 95% R.H. insulation resistance min. 100M, contact resistance max. 80m Bath temperature 352C, saltwarter concentration 51% contact resistance max. 80m Bath temperature 402C, gas concentration 31 ppm, humidity 75 to 80% R.H. Repeated insertion and removal speed of max. 200 times/hours P5K 3mm 30 contacts P5KS 4mm 30 contacts Unit weight Measures the maximum load in the post axial direction until removal Min. 0.98N {100gf}/contacts Soldering heat resistance Humidity resistance (header and socket mated) Measured based on the HP4338B measurement method of JIS C 5402 Max. 80m Composite removal force Ambient temperature Lifetime characteristics Detection current: 1mA Min. 1000M Max. 60m Post holding force Environmental characteristics 150V AC for 1 min. Composite insertion force Thermal shock resistance (header and socket mated) Conditions 0.5A/terminal (Max. 16A) Rated voltage Electrical characteristics 7mm, 8mm, 9mm type Socket: 0.17g Header: 0.09g Socket: 0.18g Header: 0.16g 2. Material and surface treatment Mated height 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 9mm Part name Material Molded portion Surface treatment Heat-resistant resin (UL94V-0) Contact/post -- Contact portion: Ni plating on base, Au plating on surface Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal) However, the area adjacent to the terminal on Ni barrier models is exposed to Ni on base. Copper alloy mm General tolerance: 0.2 DIMENSIONS P5K: Mated height 3mm, 3.5mm type * Socket A B0.1 0.50.05 0.50.05 0.20.03 2.35 2.15 (0.9) Dimension table (mm) No. of contacts 20 22 30 40 50 60 70 80 100 120 A 8.20 8.70 10.70 13.20 15.70 18.20 20.70 23.20 28.20 33.20 B 4.50 5.00 7.00 9.50 12.00 14.50 17.00 19.50 24.50 29.50 5 Suction face 1.44 4 5.8 (0.9) 0.170.03 (Terminal flatness) 0.1 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. AXK(5(S)/6(S)) mm General tolerance: 0.2 * Header A B0.1 C D 0.50.05 0.20.03 0.50.05 (1.4) Dimension table (mm) No. of contacts 20 22 30 40 50 60 70 80 100 120 A 8.20 8.70 10.70 13.20 15.70 18.20 20.70 23.20 28.20 33.20 Suction 1.44 face B 4.50 5.00 7.00 9.50 12.00 14.50 17.00 19.50 24.50 29.50 1.8 3.8 4.6 (1.4) 0.200.03 (Terminal flatness) 0.1 Mated height 3.0 mm 3.5 mm C 2.4 2.9 D 0.85 1.35 * Socket and header are mated A +0.2 -0.1 Mated height 3.0 mm 3.5 mm A 3.0 3.5 Note) P5KS series (mated heights 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, and 9.0mm) cannot be mated to this type. P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type * Socket A B0.1 0.10 0.500.05 0.200.03 1.82 (Suction face) Dimension table (mm) No. of contacts 20 24 30 34 36 40 50 60 70 80 100 A 8.20 9.20 10.70 11.70 12.20 13.20 15.70 18.20 20.70 23.20 28.20 C (1.10) ;;; ;;;;; ;;; ;;;; 0.500.05 B 4.50 5.50 7.00 8.00 8.50 9.50 12.00 14.50 17.00 19.50 24.50 4.6 0.150.03 5.4 3.20 (1.10) Mated height 4.0 mm, 5.0 mm, 6.0 mm 4.5 mm, 5.5 mm, 6.5 mm 7.0 mm, 8.0 mm, 9.0 mm C 3.05 3.55 6.05 * Header C B 4.50 5.50 7.00 8.00 8.50 9.50 12.00 14.50 17.00 19.50 24.50 B0.1 A 2.8 A 8.20 9.20 10.70 11.70 12.20 13.20 15.70 18.20 20.70 23.20 28.20 0.200.03 (1.1) No. of contacts 20 24 30 34 36 40 50 60 70 80 100 1.72 (Suction face) 4.2 Dimension table (mm) 5.0 4.30 1.95 0. 9 0.500.05 0.200.03 (1.1) 0.10 0.500.05 Mated height 4.0 mm, 4.5 mm, 7.0 mm 5.0 mm, 5.5 mm, 8.0 mm 6.0 mm, 6.5 mm, 9.0 mm All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. C 0.95 1.95 2.95 D 3.3 4.3 5.3 AXK(5(S)/6(S)) mm General tolerance: 0.2 * Socket and header are mated H +0.2 -0.1 Note) P5K series (mated heights 3.0mm, 3.5mm) cannot be mated to this type. Mated height 4.0 mm 4.5 mm 5.0 mm 5.5 mm 6.0 mm 6.5 mm 7.0 mm 8.0 mm 9.0 mm H 4.0 4.5 5.0 5.5 6.0 6.5 7.0 8.0 9.0 P5KS: Mated height 4.0mm, 4.5mm for 120 contacts and 160 contacts types, 6.5mm for 130 contacts type * Socket A 0.500.05 0.200.03 No. of contacts 120 130 160 A 32.50 35.00 42.50 B 29.50 32.00 39.50 C 32.00 34.50 42.00 Terminal flatness 0.10 1.82 (Suction face) B0.1 D (1.10) 3.20 5.4 4.6 (1.10) 0.45 0.150.03 3.000.08 C0.1 Mated height 4.0 mm 4.5 mm, 6.5 mm 0.500.05 dia. D 3.05 3.55 * Header A B0.10 0.10 2.80 C 31.00 33.50 41.00 Note 1) 0.200.03 0.500.05 dia. (1.10) B 29.50 32.00 39.50 2.100.08 A 32.50 35.00 42.50 0.45 No. of contacts 120 130 160 1.72 (Suction face) 4.20 0.200.03 5.00 0.500.05 (1.10) 3.30 0.95 C0.10 Mated height 4.0 mm, 4.5 mm 6.5 mm D 3.30 5.30 E 0.95 2.95 * Socket and header are mated +0.2 -0.1 H Mated height 4.0 mm 4.5 mm 6.5 mm H 4.0 4.5 6.5 Notes) 1. Inquiry separately for diagrams of the embossed tape and cautions for use. 2. Be sure to ask for proper specifications and drawings before actual use. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. AXK(5(S)/6(S)) EMBOSSED TAPE DIMENSIONS (unit:mm, Common for respective contact type, socket and header) * Tape dimensions (Conforming to JIS C 0806-1990. However, some tapes have mounting hole pitches that do not comply with the standard.) Tape I Tape II A0.3 A0.3 C E B 1.75 C 4 2 D 1.75 Top cover tape 4 2 Pull out direction Pull out direction * Plastic reel dimensions (Conforming to EIAJ ET-7200B)/ Paper reel dimensions (Conforming to JIS C 0806-1990) Emboss carrier tape F D 1.5+0.1 0 dia. 1.5+0.1 0 dia. Dimension table (mm) (1) Suffix: G (1 reel, 1,500 pieces or 1,000 pieces embossed tape and plastic reel package) Type Mated height Socket: 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm Header: 4.0mm, 4.5mm, 7.0mm P5KS Socket: 7.0mm, 8.0mm, 9.0mm Header: 5.0mm, 5.5mm, 6.0mm, 6.5mm, 8.0mm, 9.0mm No. of contacts 20 to 50 60 to 70 80 to 100 120 to 160 20 to 50 60 to 70 80 to 100 130 Type of taping Tape I Tape II Tape II Tape II Tape I Tape II Tape II Tape II A 24.0 32.0 44.0 56.0 24.0 32.0 44.0 56.0 B -- 28.4 40.4 52.4 -- 28.4 40.4 52.4 C 11.5 14.2 20.2 26.2 11.5 14.2 20.2 26.2 D 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 E 25.41 33.41 45.41 57.41 25.41 33.41 45.41 57.41 F 380 dia. 380 dia. 380 dia. 380 dia. 380 dia. 380 dia. 380 dia. 380 dia. Quantity per reel B -- 28.4 40.4 52.4 -- 28.4 40.4 52.4 C 11.5 14.2 20.2 26.2 11.5 14.2 20.2 26.2 D 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 E 24.4 +20 32.4 +20 44.4 +20 56.4 +20 24.4 +20 32.4 +20 44.4 +20 56.4 +20 F 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. Quantity per reel B -- 28.4 40.4 52.4 -- 28.4 40.4 52.4 -- 28.4 40.4 52.4 C 11.5 14.2 20.2 26.2 11.5 14.2 20.2 26.2 11.5 14.2 20.2 26.2 D 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 E 24.4 +20 32.4 +20 44.4 +20 56.4 +20 24.4 +20 32.4 +20 44.4 +20 56.4 +20 24.4 +20 32.4 +20 44.4 +20 56.4 +20 F 330 dia. 330 dia. 330 dia. 330 dia. 330 dia. 330 dia. 330 dia. 330 dia. 370 dia. 370 dia. 370 dia. 370 dia. Quantity per reel 1,500 pcs. 1,000 pcs. (2) Suffix: J (1 reel, 1,500 pieces embossed tape and paper reel package) Type Mated height P5K Socket and header are common 3.0mm, 3.5mm P5KS Socket: 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm Header: 4.0mm, 4.5mm, 7.0mm No. of contacts 20 to 50 60 to 70 80 to 100 120 20 to 50 60 to 70 80 to 100 120 to 160 Type of taping Tape I Tape II Tape II Tape II Tape I Tape II Tape II Tape II A 24.0 32.0 44.0 56.0 24.0 32.0 44.0 56.0 1,500 pcs. (3) Suffix: P (1 reel, 1,000 pieces embossed tape and paper reel package) Type Mated height P5K Socket and header are common 3.0mm, 3.5mm Socket: 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm Header: 4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm P5KS Socket: 7.0mm, 8.0mm, 9.0mm Header: 6.0mm, 6.5mm, 9.0mm No. of contacts 20 to 50 60 to 70 80 to 100 120 20 to 50 60 to 70 80 to 100 120 to 160 20 to 50 60 to 70 80 to 100 130 Type of taping Tape I Tape II Tape II Tape II Tape I Tape II Tape II Tape II Tape I Tape II Tape II Tape II A 24.0 32.0 44.0 56.0 24.0 32.0 44.0 56.0 24.0 32.0 44.0 56.0 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 1,000 pcs. AXK(5(S)/6(S)) Connector orientation with respect to direction of progress of embossed tape Type Direction of tape progress P5K P5KS (Less than 100 contacts) Socket Socket This corner is oriented on the C side. Header P5KS 120, 130, 160 contacts Socket This corner is oriented on the C side. Header Header This corner is oriented on the C side. This corner is oriented on the C side. Note: There is no indication on this product regarding top-bottom or left-right orientation. NOTES * P5K Socket * P5K Header Recommended PC board pattern (TOP VIEW) Recommended PC board pattern (TOP VIEW) B0.05 0.500.05 0.500.05 0.250.05 1.000.05 0.1250.05 0.750.05 0.1250.05 0.750.05 Recommended metal mask pattern Metal mask thickness: Here, 150 m (Opening area ratio: 56%) Metal mask thickness: Here, 150 m (Opening area ratio: 62%) (1.55) 5.600.01 6.800.01 (1.10) Chamfered corner Recommended metal mask pattern Recommended metal mask pattern Metal mask thickness: Here, 120 m (Opening area ratio: 69%) Metal mask thickness: Here, 120 m (Opening area ratio: 78%) 6.800.01 4.100.01 5.600.01 B0.01 0.500.01 0.500.01 0.230.01 (1.35) B0.01 0.500.01 0.500.01 0.230.01 (1.35) 2. PC Boards and Recommended Metal Mask Patterns Connectors are mounted with high density, with a pitch interval of 0.4 to 0.5 mm. It is therefore necessary to make sure that the right levels of solder are used, in order to reduce solder bridge and other issues. The figures to the right are recommended metal mask patterns. Please use them as a reference. B0.01 0.500.01 0.500.01 0.230.01 4.600.01 B0.01 0.500.01 0.500.01 0.230.01 (1.10) Mating state Recommended metal mask pattern (1.55) Chamfered corner 2.500.01 Chamfered corner (1.95) Chamfered corner 1.700.01 Chamfered corner MIN 6.80 3.200.05 Outline (top view) * See the dimension table on page 70 for more information on the B dimension of the socket and header. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. MIN 5.60 B0.05 0.500.05 0.500.05 0.250.05 (1.95) 1. Prevention of reverse mating Other than 120, 130, 160 contacts type, the socket and header are protected from reverse mating by a molded resin key. Excessive mating force may damage the key, so be sure to match chamfered corners when mating. AXK(5(S)/6(S)) P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type * Socket 0.1250.05 0.750.05 6.400.01 (1.65) (1.65) (1.30) MIN 6.40 0.250.05 B0.01 0.500.01 0.500.01 0.230.01 3.800.01 6.400.01 0.500.05 Metal mask thickness: Here, 120 m (Opening area ratio: 76%) B0.01 0.500.01 0.500.01 0.230.01 2.400.05 0.500.05 Recommended metal mask pattern Metal mask thickness: Here, 150 m (Opening area ratio: 60%) 3.100.01 B0.05 Recommended metal mask pattern (1.30) Recommended PC board pattern (TOP VIEW) * See the dimension table on page 71 for more information on the B dimension. * Header 6.000.01 (1.90) 6.000.01 (1.90) 0.1250.05 0.750.05 2.200.01 B0.01 0.500.01 0.500.01 0.230.01 (1.50) MIN 6.00 0.250.05 Metal mask thickness: Here, 120 m (Opening area ratio: 87%) 3.000.01 0.500.05 Recommended metal mask pattern Metal mask thickness: Here, 150 m (Opening area ratio: 69%) B0.01 0.500.01 0.500.01 0.230.01 2.000.05 B0.05 0.500.05 Recommended metal mask pattern (1.50) Recommended PC board pattern (TOP VIEW) * See the dimension table on page 71 for more information on the B dimension. P5KS: Mated height 4.0mm, 4.5mm for 120 contacts and 160 contacts types, 6.5mm for 130 contacts type * Socket B0.01 0.500.01 0.500.01 0.230.01 (1.50) C0.05 3.100.01 Min6.4 2-0.650.05 dia. (hole) 6.400.01 0.1250.05 0.50.05 B0.01 0.500.01 0.500.01 0.230.01 (1.65) 0.500.05 0.250.05 Metal mask thickness: Here, 120 m (Opening area ratio: 76%) (1.65) 3.000.05 (Positioning boss dimentions) 2.400.05 (Pattern dimensions) Recommended metal mask pattern Metal mask thickness: Here, 150 m (Opening area ratio: 60%) 3.000.01 6.000.01 B0.05 Recommended metal mask pattern (1.50) Recommended PC board pattern (TOP VIEW) * See the dimension table on page 72 for more information on the B and C dimensions. 2-0.650.05 dia. (hole) (1.50) MIN 6.00 C0.05 B0.01 0.500.01 0.500.01 0.230.01 6.000.01 0.1250.05 0.500.05 B0.01 0.500.01 0.500.01 0.230.01 (1.90) 0.500.05 0.250.05 Metal mask thickness: Here, 120 m (Opening area ratio: 87%) (1.90) 2.100.05 (Positioning boss dimentions) 2.000.05 (Pattern dimensions) Recommended metal mask pattern Metal mask thickness: Here, 150 m (Opening area ratio: 69%) 3.000.01 6.000.01 B0.05 Recommended metal mask pattern (1.50) Recommended PC board pattern (TOP VIEW) 2.200.01 * Header * See the dimension table on page 72 for more information on the B and C dimensions. Regarding general notes, please refer to page 12. For other details, please verify with the product specification sheets. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd.