AXK(5(S)/6(S))
NARROW-PITCH
CONNECTORS FOR
BOARD-TO-BOARD
CONNECTION
NARROW PITCH
(0.5mm) CONNECTORS
P5 SERIES — P5K, P5KS —
• P5K
• P5KS
Note) The external appearance and PC board pattern
differs for the P5K and P5KS series.
FEATURES
1. The product lineup consists of
3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm,
5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm,
7.0 mm, 8.0 mm, and 9.0 mm.
2. Strong resistance to adverse
environments! Utilizes
construction
for high contact reliability.
Note: P5KS will support V notch and Ni barrier from
November, 2005, and will have TOUGH
CONTACT construction.
1) Contacts are highly resistant to shock
caused by dropping and employ our
original bellows contact construction.
2) V notch construction used for excellent
resistance against foreign matters.
(P5KS: Available from Nov. 2005)
3) Use of Ni barrier construction is
standard. Highly effective against solder
creeping.
(P5KS: Available from Nov. 2005)
4) Porosity treatment applied for
improved resistance against corrosion.
3. Even with the low profile, the
effective mating length has been
extended to ensure that there is some
latitude in the mating.
4. Automatic mounting
1) Suction area for suction-type
automatic mounting machines is
employed.
5. Compliance with RoHS’ Directive
Environmentally friendly, the connectors’
comply with Europe’s RoHS’ Directive.
Cadmium, lead, mercury, hexavalent,
chromium, PBB and PBDE are not used.
APPLICATIONS
1. Mobile phones, PHS, mobile info-
communications terminals, and other
small portable devices
2. The 160-contacts connector:
This connector is particularly suited to
the motherboard, CPU board, and other
multi-pin expansion boards on notebook
PCs and other info-communications
applications.
Socket Header
Socket Header
Type Mated height Notes
P5K 3 mm, 3.5 mm The external
appearance and
PC board pattern
differs for the P5K
and P5KS series.
P5KS
4 mm, 4.5 mm,
5 mm, 5.5 mm,
6 mm, 6.5 mm,
7 mm, 8 mm,
9 mm
P5K P5KS
4 constructions
Bellows contact
construction
V notch construction —
Note)
Ni barrier construction —
Note)
Porosity treatment
• What is meant by “bellows type” contact?
Since the contact is
formed by bending
thin plate, it has a
spring-like quality.
This construction
helps make it resist-
ant to dropping and
twisting.
The roll surfaces
are in contact
with each other,
providing high
contact reliability.
Rather than two broken-out surfaces, the contact is
formed by the surfaces of two rolled plates. This
helps the contact hold up better to repeated
insertions and removals, while at the same time
achieving highly reliable contact.
● What is V notch construction?
By using the edge for the contacting part
and increasing contact pressure per unit
area, the effectiveness in removing flux
and contaminants is increased compared
to its predecessor. This is also effective in
preventing the trapping of contaminants.
[Cross section of contacting part]
Without notch With V notch
Header side contact cross section
Socket side contact cross section
● What is Ni barrier construction?
By providing an exposed nickel part on the
gold (Au) plated contact, solder creeping is
prevented despite the ultra low profile.
Header side contact
[Contact]
Socket side contact
Note: Construction makes solder creeping difficult
because header side is formed at the same time.
Ni barrier
Exposed
Ni part
Cu Ni Au
Cross section of
socket side contact
Pinholes
Ni plating
Base material
Porosity treatment film
What is porosity treatment?
Au plating Surrounding gas
This treatment consists of coating the
surface with a very thin film to seal pinholes
in the gold plating. This porosity treatment
technology ensures the same contact
reliability for thin gold plating as that of thick
gold plating.
●
Improvement in insertion/removal durability
●
Improvement in resistance to corrosion
●
Improvement in contact reliability for digital signals
Type Effective mating length
P5K 0.75 mm
P5KS 1.0 mm
Effective mating length
With long effective
mating lengths, even
if the connection is
not perfect, the
electrical connection
is more than enough
for normal operations.
Suction face
P5K Header P5K Socket
Mother board
CPU boards and
other multi-pin
expansion boards.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
TABLE OF PRODUCT TYPES
ORDERING INFORMATION
1. P5K (3.0 mm and 3.5 mm)
Socket Header Socket Header
P5K P5KS
3.0mm
Mated
height
20
22
24
30
34
36
40
50
60
70
80
100
120
130
160
Product name P5K P5KS
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
3.5mm 4.0mm
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
4.5mm
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
✩
5.0mm
✩
✩
✩
✩
✩
✩
✩
✩
✩
5.5mm
✩
✩
✩
✩
✩
✩
✩
✩
✩
6.0mm
✩
✩
✩
✩
✩
✩
✩
✩
6.5mm
✩
✩
✩
✩
✩
✩
✩
✩
✩
7.0mm
✩
✩
✩
✩
✩
✩
✩
✩
8.0mm
✩
✩
✩
✩
✩
✩
✩
✩
9.0mm
✩
✩
✩
✩
✩
✩
✩
✩
Notes: 1. The standard type comes without positioning bosses. (Positioning bosses come standard on types with
4.0 mm and 4.5 mm mated height with 120 and 160 contacts, and 6.5 mm mated height with 130 contacts.)
Connectors with positioning boss are available for on-demand production.
2. Please consult us for products which have no ✩ mark.
Number of contacts
Mated height
<Socket>
1: For mated height 3.0 mm and 3.5 mm
<Header>
2: For mated height 3.5 mm
3: For mated height 3.0 mm
Surface treatment (Contact portion / Terminal portion)
5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
Number of contacts (2 digits)
Packing
J: 1,500 pieces embossed tape and paper reel × 2
P: 1,000 pieces embossed tape and paper reel × 2
5: Narrow Pitch Connector P5K Socket
6: Narrow Pitch Connector P5K Header
Functions
3: With positioning bosses
4: Without positioning bosses
AXK
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
2. P5KS (4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 8.0 mm and 9.0 mm)
Mated height
<Socket>
0: For mated height 4.0 mm, 5.0 mm and 6.0 mm
2: For mated height 4.5 mm, 5.5 mm and 6.5 mm
3: For mated height 7.0 mm, 8.0 mm and 9.0 mm
<Header>
4: For mated height 4.0 mm, 4.5 mm and 7.0 mm
5: For mated height 5.0 mm, 5.5 mm and 8.0 mm
6: For mated height 6.0 mm, 6.5 mm and 9.0 mm
Surface treatment (Contact portion / Terminal portion)
0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
(Previous model: Ni plating on base, SnPb plating on surface of terminal portion)
5: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
7: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface
(for Ni barrier product available from Nov. 2005)
Number of contacts (2 digits)
Contact portion
<Socket>
Nil: Without V notch product
Y: V notch type product (chamfered on both sides) (Available from Nov. 2005)
<Header>
Nil: Without V notch product
Y: V notch type product (Available from Nov. 2005)
Packing
G: 1,500 pieces embossed tape and plastic reel × 2
Socket: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm
Header: Mated heights 4.0 mm, 4.5 mm, 7.0 mm
1,000 pieces plastic reel × 2
Socket: Mated heights 7.0 mm, 8.0 mm, 9.0 mm
Header: Mated heights 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 8.0 mm, 9.0 mm
J: 1,500 pieces embossed tape and paper reel × 2
P: 1,000 pieces embossed tape and paper reel × 2
Notes: 1. Models with mating directionality to prevent reverse insertion have over 100 contacts. Models without mating directionality to prevent
reverse insertion have less than 100 contacts.
2. The plating on the solder terminal portion has changed from SnPb to Au plating from the production lot of December, 2002,
in order to eliminate lead.
3. Only “J” and “P” are supported as packaging specifications for models without Ni barrier. The packaging specification for Ni barrier
models is “G” only.
Models possible for “J” are as follows:
Sockets: Mated heights 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, and 6.5 mm
Headers: Mated heights 4.0 mm, 4.5 mm, and 7.0 mm
5S: Narrow Pitch Connector P5KS Socket
6S: Narrow Pitch Connector P5KS Header
Functions
3: With positioning boss and direction for protection from reverse mating
4: Without positioning boss/with direction for protection from reverse mating
7: With positioning boss/without direction for protection from reverse mating
8: Without positioning boss and direction for protection from reverse mating
AXK
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
PRODUCT TYPES
1. P5K
Notes) 1. For the protection of our environment, orders of J: Inner carton (1 reel) 1,500 pcs. units are recommended to reduce packaging materials.
In addition, orders of P: Inner carton (1 reel) 1,000 pcs. units with embossed tape packaging are also available; to order change the suffix “J” to the suffix “P.”
2. Regarding ordering units: During production: Please make orders in 1 reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confirm proper mounting” on page 13.)
Samples: Small lot orders are possible. Change the suffix “J” to the suffix “P”.
3. The standard type comes without positioning bosses.
Connectors with positioning bosses are available on-demand production. For P5K type of 8th digit of the part no. changes from 4 to 3.
e.g. Mated height 3.0 mm, 20 contacts for sockets: AXK520135P
Product
name
Mated
height
No. of
contacts
Part No. Packing
Socket Header Inner carton (1 reel) Outer carton
P5K
3.0 mm
20 AXK520145J AXK620345J
1,500 pieces Note 1) 3,000 pieces Note 1)
22 AXK522145J AXK622345J
30 AXK530145J AXK630345J
40 AXK540145J AXK640345J
50 AXK550145J AXK650345J
60 AXK560145J AXK660345J
70 AXK570145J AXK670345J
80 AXK580145J AXK680345J
100 AXK500145J AXK600345J
120 AXK5A2145J AXK6A2345J
3.5 mm
20 AXK520145J AXK620245J
22 AXK522145J AXK622245J
30 AXK530145J AXK630245J
40 AXK540145J AXK640245J
50 AXK550145J AXK650245J
60 AXK560145J AXK660245J
70 AXK570145J AXK670245J
80 AXK580145J AXK680245J
100 AXK500145J AXK600245J
120 AXK5A2145J AXK6A2245J
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
2. P5KS
Product
name
Mated
height
No. of
contacts
Part No. Packing
Socket Header
Inner carton (1 reel) Outer carton
Without V notch
and Ni barrier
product
(Paper reel)
(Paper reel)
(Recommendation)
Without V notch
and Ni barrier
product
(Paper reel)
(Paper reel)
(Recommendation)
P5KS
4.0 mm
20 AXK5S20045* AXK5S20047YG
(From Nov. 2005) AXK6S20445* AXK6S20447YG
(From Nov. 2005)
Note 2)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“G” mark on end of
part No.;
1,500 pieces
Note 2)
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
“G” mark on end of
part No.;
3,000 pieces
24 AXK5S24045* AXK5S24047YG
(From Nov. 2005) AXK6S24445* AXK6S24447YG
(From Nov. 2005)
30 AXK5S30045* AXK5S30047YG
(From Nov. 2005) AXK6S30445* AXK6S30447YG
(From Nov. 2005)
40 AXK5S40045* AXK5S40047YG
(From Nov. 2005) AXK6S40445* AXK6S40447YG
(From Nov. 2005)
50 AXK5S50045* AXK5S50047YG
(From Nov. 2005) AXK6S50445* AXK6S50447YG
(From Nov. 2005)
60 AXK5S60045* AXK5S60047YG
(From Nov. 2005) AXK6S60445* AXK6S60447YG
(From Nov. 2005)
70 AXK5S70045* AXK5S70047YG
(From Nov. 2005) AXK6S70445* AXK6S70447YG
(From Nov. 2005)
80 AXK5S80045* AXK5S80047YG
(From Nov. 2005) AXK6S80445* AXK6S80447YG
(From Nov. 2005)
100 AXK5S00045* AXK5S00047YG
(From Nov. 2005) AXK6S00445* AXK6S00447YG
(From Nov. 2005)
120 AXK5SA2075* AXK5SA2077YG
(From Nov. 2005) AXK6SA2475* AXK6SA2477YG
(From Nov. 2005)
160 AXK5SA6075* AXK5SA6077YG
(From Nov. 2005) AXK6SA6475* AXK6SA6477YG
(From Nov. 2005)
4.5 mm
20 AXK5S20245* AXK5S20247YG
(From Nov. 2005) AXK6S20445* AXK6S20447YG
(From Nov. 2005)
24 AXK5S24245* AXK5S24247YG
(From Nov. 2005) AXK6S24445* AXK6S24447YG
(From Nov. 2005)
30 AXK5S30245* AXK5S30247YG
(From Nov. 2005) AXK6S30445* AXK6S30447YG
(From Nov. 2005)
36 AXK5S36245* AXK5S36247YG
(From Nov. 2005) AXK6S36445* AXK6S36447YG
(From Nov. 2005)
40 AXK5S40245* AXK5S40247YG
(From Nov. 2005) AXK6S40445* AXK6S40447YG
(From Nov. 2005)
50 AXK5S50245* AXK5S50247YG
(From Nov. 2005) AXK6S50445* AXK6S50447YG
(From Nov. 2005)
60 AXK5S60245* AXK5S60247YG
(From Nov. 2005) AXK6S60445* AXK6S60447YG
(From Nov. 2005)
70 AXK5S70245* AXK5S70247YG
(From Nov. 2005) AXK6S70445* AXK6S70447YG
(From Nov. 2005)
80 AXK5S80245* AXK5S80247YG
(From Nov. 2005) AXK6S80445* AXK6S80447YG
(From Nov. 2005)
100 AXK5S00245* AXK5S00247YG
(From Nov. 2005) AXK6S00445* AXK6S00447YG
(From Nov. 2005)
120 AXK5SA2275* AXK5SA2277YG
(From Nov. 2005) AXK6SA2475* AXK6SA2477YG
(From Nov. 2005)
160 AXK5SA6275* AXK5SA6277YG
(From Nov. 2005) AXK6SA6475* AXK6SA6477YG
(From Nov. 2005)
5.0 mm
20 AXK5S20045* AXK5S20047YG
(From Nov. 2005) AXK6S20545P AXK6S20547YG
(From Nov. 2005)
Note 2)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“G” mark on end of
part No.;
Socket: 1,500 pieces
Header: 1,000 pieces
Note 2)
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
“G” mark on end of
part No.;
Socket: 3,000 pieces
Header: 2,000 pieces
30 AXK5S30045* AXK5S30047YG
(From Nov. 2005) AXK6S30545P AXK6S30547YG
(From Nov. 2005)
34 AXK5S34045* AXK5S34047YG
(From Nov. 2005) AXK6S34545P AXK6S34547YG
(From Nov. 2005)
40 AXK5S40045* AXK5S40047YG
(From Nov. 2005) AXK6S40545P AXK6S40547YG
(From Nov. 2005)
50 AXK5S50045* AXK5S50047YG
(From Nov. 2005) AXK6S50545P AXK6S50547YG
(From Nov. 2005)
60 AXK5S60045* AXK5S60047YG
(From Nov. 2005) AXK6S60545P AXK6S60547YG
(From Nov. 2005)
70 AXK5S70045* AXK5S70047YG
(From Nov. 2005) AXK6S70545P AXK6S70547YG
(From Nov. 2005)
80 AXK5S80045* AXK5S80047YG
(From Nov. 2005) AXK6S80545P AXK6S80547YG
(From Nov. 2005)
100 AXK5S00045* AXK5S00047YG
(From Nov. 2005) AXK6S00545P AXK6S00547YG
(From Nov. 2005)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
Product
name
Mated
height
No. of
contacts
Part No. Packing
Socket Header
Inner carton (1 reel) Outer carton
Without V notch
and Ni barrier
product
(Paper reel)
(Paper reel)
(Recommendation)
Without V notch
and Ni barrier
product
(Paper reel)
(Paper reel)
(Recommendation)
P5KS
5.5 mm
20 AXK5S20245* AXK5S20247YG
(From Nov. 2005) AXK6S20545P AXK6S20547YG
(From Nov. 2005)
Note 2)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“G” mark on end of
part No.;
Socket: 1,500 pieces
Header: 1,000 pieces
Note 2)
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
“G” mark on end of
part No.;
Socket: 3,000 pieces
Header: 2,000 pieces
30 AXK5S30245* AXK5S30247YG
(From Nov. 2005) AXK6S30545P AXK6S30547YG
(From Nov. 2005)
34 AXK5S34245* AXK5S34247YG
(From Nov. 2005) AXK6S34545P AXK6S34547YG
(From Nov. 2005)
40 AXK5S40245* AXK5S40247YG
(From Nov. 2005) AXK6S40545P AXK6S40547YG
(From Nov. 2005)
50 AXK5S50245* AXK5S50247YG
(From Nov. 2005) AXK6S50545P AXK6S50547YG
(From Nov. 2005)
60 AXK5S60245* AXK5S60247YG
(From Nov. 2005) AXK6S60545P AXK6S60547YG
(From Nov. 2005)
70 AXK5S70245* AXK5S70247YG
(From Nov. 2005) AXK6S70545P AXK6S70547YG
(From Nov. 2005)
80 AXK5S80245* AXK5S80247YG
(From Nov. 2005) AXK6S80545P AXK6S80547YG
(From Nov. 2005)
100 AXK5S00245* AXK5S00247YG
(From Nov. 2005) AXK6S00545P AXK6S00547YG
(From Nov. 2005)
6.0 mm
20 AXK5S20045* AXK5S20047YG
(From Nov. 2005) AXK6S20645P AXK6S20647YG
(From Nov. 2005)
30 AXK5S30045* AXK5S30047YG
(From Nov. 2005) AXK6S30645P AXK6S30647YG
(From Nov. 2005)
40 AXK5S40045* AXK5S40047YG
(From Nov. 2005) AXK6S40645P AXK6S40647YG
(From Nov. 2005)
50 AXK5S50045* AXK5S50047YG
(From Nov. 2005) AXK6S50645P AXK6S50647YG
(From Nov. 2005)
60 AXK5S60045* AXK5S60047YG
(From Nov. 2005) AXK6S60645P AXK6S60647YG
(From Nov. 2005)
70 AXK5S70045* AXK5S70047YG
(From Nov. 2005) AXK6S70645P AXK6S70647YG
(From Nov. 2005)
80 AXK5S80045* AXK5S80047YG
(From Nov. 2005) AXK6S80645P AXK6S80647YG
(From Nov. 2005)
100 AXK5S00045* AXK5S00047YG
(From Nov. 2005) AXK6S00645P AXK6S00647YG
(From Nov. 2005)
6.5 mm
20 AXK5S20245* AXK5S20247YG
(From Nov. 2005) AXK6S20645P AXK6S20647YG
(From Nov. 2005)
30 AXK5S30245* AXK5S30247YG
(From Nov. 2005) AXK6S30645P AXK6S30647YG
(From Nov. 2005)
40 AXK5S40245* AXK5S40247YG
(From Nov. 2005) AXK6S40645P AXK6S40647YG
(From Nov. 2005)
50 AXK5S50245* AXK5S50247YG
(From Nov. 2005) AXK6S50645P AXK6S50647YG
(From Nov. 2005)
60 AXK5S60245* AXK5S60247YG
(From Nov. 2005) AXK6S60645P AXK6S60647YG
(From Nov. 2005)
70 AXK5S70245* AXK5S70247YG
(From Nov. 2005) AXK6S70645P AXK6S70647YG
(From Nov. 2005)
80 AXK5S80245* AXK5S80247YG
(From Nov. 2005) AXK6S80645P AXK6S80647YG
(From Nov. 2005)
100 AXK5S00245* AXK5S00247YG
(From Nov. 2005) AXK6S00645P AXK6S00647YG
(From Nov. 2005)
130 AXK5SA3275* AXK5SA3277YG
(From Nov. 2005) AXK6SA3675P AXK6SA3677YG
(From Nov. 2005)
7.0 mm
20 AXK5S20340P AXK5S20347YG
(From Nov. 2005) AXK6S20445* AXK6S20447YG
(From Nov. 2005)
Note 2)
“Asterisk” mark on
end of part No.;
J: 1,500 pieces
P: 1,000 pieces
“G” mark on end of
part No.;
Socket: 1,000 pieces
Header: 1,500 pieces
Note 2)
“Asterisk” mark on
end of part No.;
J: 3,000 pieces
P: 2,000 pieces
“G” mark on end of
part No.;
Socket: 2,000 pieces
Header: 3,000 pieces
30 AXK5S30340P AXK5S30347YG
(From Nov. 2005) AXK6S30445* AXK6S30447YG
(From Nov. 2005)
40 AXK5S40340P AXK5S40347YG
(From Nov. 2005) AXK6S40445* AXK6S40447YG
(From Nov. 2005)
50 AXK5S50340P AXK5S50347YG
(From Nov. 2005) AXK6S50445* AXK6S50447YG
(From Nov. 2005)
60 AXK5S60340P AXK5S60347YG
(From Nov. 2005) AXK6S60445* AXK6S60447YG
(From Nov. 2005)
70 AXK5S70340P AXK5S70347YG
(From Nov. 2005) AXK6S70445* AXK6S70447YG
(From Nov. 2005)
80 AXK5S80340P AXK5S80347YG
(From Nov. 2005) AXK6S80445* AXK6S80447YG
(From Nov. 2005)
100 AXK5S00340P AXK5S00347YG
(From Nov. 2005) AXK6S00445* AXK6S00447YG
(From Nov. 2005)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
Notes) 1. Regarding ordering units: During production: Please make orders in 1 reel units.
Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confirm proper mounting” on page 13.)
Samples: Small lot orders are possible. For models without V notch and Ni barrier, change the suffix “J” to the suffix “P,” or place a “P” where the “*” is located.
For V notch and Ni barrier models add “G” at the end of the part number.
2. The standard type comes without positioning bosses (However, mated heights of 4 mm or higher and 120 pins or more comes standard with bosses). Connectors
with positioning bosses are available for on-demand production. For P5KS type of 9th digit of the part no. changes from 4 to 3.
e.g. Mated height 4.0 mm, 20 contacts for sockets: AXK5S20037G
Product
name
Mated
height
No. of
contacts
Part No. Packing
Socket Header
Inner carton (1 reel) Outer carton
Without V notch
and Ni barrier
product
(Paper reel)
(Paper reel)
(Recommendation)
Without V notch
and Ni barrier
product
(Paper reel)
(Paper reel)
(Recommendation)
P5KS
8.0 mm
20 AXK5S20340P AXK5S20347YG
(From Nov. 2005) AXK6S20545P AXK6S20547YG
(From Nov. 2005)
1,000 pieces 2,000 pieces
30 AXK5S30340P AXK5S30347YG
(From Nov. 2005) AXK6S30545P AXK6S30547YG
(From Nov. 2005)
40 AXK5S40340P AXK5S40347YG
(From Nov. 2005) AXK6S40545P AXK6S40547YG
(From Nov. 2005)
50 AXK5S50340P AXK5S50347YG
(From Nov. 2005) AXK6S50545P AXK6S50547YG
(From Nov. 2005)
60 AXK5S60340P AXK5S60347YG
(From Nov. 2005) AXK6S60545P AXK6S60547YG
(From Nov. 2005)
70 AXK5S70340P AXK5S70347YG
(From Nov. 2005) AXK6S70545P AXK6S70547YG
(From Nov. 2005)
80 AXK5S80340P AXK5S80347YG
(From Nov. 2005) AXK6S80545P AXK6S80547YG
(From Nov. 2005)
100 AXK5S00340P AXK5S00347YG
(From Nov. 2005) AXK6S00545P AXK6S00547YG
(From Nov. 2005)
9.0 mm
20 AXK5S20340P AXK5S20347YG
(From Nov. 2005) AXK6S20645P AXK6S20647YG
(From Nov. 2005)
30 AXK5S30340P AXK5S30347YG
(From Nov. 2005) AXK6S30645P AXK6S30647YG
(From Nov. 2005)
40 AXK5S40340P AXK5S40347YG
(From Nov. 2005) AXK6S40645P AXK6S40647YG
(From Nov. 2005)
50 AXK5S50340P AXK5S50347YG
(From Nov. 2005) AXK6S50645P AXK6S50647YG
(From Nov. 2005)
60 AXK5S60340P AXK5S60347YG
(From Nov. 2005) AXK6S60645P AXK6S60647YG
(From Nov. 2005)
70 AXK5S70340P AXK5S70347YG
(From Nov. 2005) AXK6S70645P AXK6S70647YG
(From Nov. 2005)
80 AXK5S80340P AXK5S80347YG
(From Nov. 2005) AXK6S80645P AXK6S80647YG
(From Nov. 2005)
100 AXK5S00340P AXK5S00347YG
(From Nov. 2005) AXK6S00645P AXK6S00647YG
(From Nov. 2005)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
DIMENSIONS mm General tolerance: ±0.2
Item
Specifications
Conditions
3mm, 3.5mm type 4mm, 4.5mm, 5mm,
5.5mm, 6mm, 6.5mm type 7mm, 8mm, 9mm type
Electrical
characteristics
Rated current 0.5A/terminal (Max. 10A) 0.5A/terminal (Max. 16A)
Rated voltage 60V AC/DC
Breakdown voltage 150V AC for 1 min. Detection current: 1mA
Insulation resistance Min. 1000MΩUsing 500V DC megger
Contact resistance Max. 60mΩMax. 80mΩ
Measured based on the HP4338B
measurement method of JIS C
5402
Mechanical
characteristics
Composite insertion
force Max. 0.785N {80gf} × no. of contacts (initial)
Composite removal
force Min. 0.0588N {6gf} × no. of contacts
Post holding force Min. 0.98N {100gf}/contacts
Measures the maximum load in
the post axial direction until
removal
Environmental
characteristics
Ambient temperature –55°C to +85°C No freezing at low temperatures
Soldering heat
resistance
Max. peak temperature of 245°C Infrared reflow soldering
300°C within 5 sec. Soldering iron
Thermal shock
resistance (header
and socket mated)
5 cycles, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
5 cycles, insulation resistance
min. 100MΩ,
contact resistance
max. 80mΩ
Sequence
1. –55 °C, 30 minutes
2. ~ , Max. 5 minutes
3. 85 °C, 30 minutes
4. ~ , Max. 5 minutes
Humidity resistance
(header and socket
mated)
120 hours, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
120 hours, insulation resistance
min. 100MΩ,
contact resistance
max. 80mΩ
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Saltwater spray
resistance (header
and socket mated)
24 hours, insulation resistance min. 100MΩ,
contact resistance max. 60mΩ
24 hours, insulation resistance
min. 100MΩ,
contact resistance
max. 80mΩ
Bath temperature 35±2°C,
saltwarter concentration 5±1%
H2S resistance
(header and socket
mated)
48 hours, contact resistance max. 60mΩ48 hours, contact resistance
max. 80mΩ
Bath temperature 40±2°C,
gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Lifetime
characteristics
Insertion and removal
life 50 times Repeated insertion and removal
speed of max. 200 times/hours
Unit weight P5K 3mm 30 contacts
P5KS 4mm 30 contacts
Socket: 0.17g Header: 0.09g
Socket: 0.18g Header: 0.16g
Part name Mated height 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 9mm
Material Surface treatment
Molded portion Heat-resistant resin (UL94V-0) —
Contact/post Copper alloy
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
However, the area adjacent to the terminal on Ni barrier models is
exposed to Ni on base.
0
–3
+3
0
P5K: Mated height 3mm, 3.5mm type
• Socket
Dimension table (mm)
No. of contacts A B
20 8.20 4.50
22 8.70 5.00
30 10.70 7.00
40 13.20 9.50
50 15.70 12.00
60 18.20 14.50
70 20.70 17.00
80 23.20 19.50
100 28.20 24.50
120 33.20 29.50
5
A
0.5±0.05
0.2±0.03
0.5±0.05
B±0.1
(0.9)
(0.9)
4
0.17±0.03
5.8
2.15
1.44
Suction
face
2.35
0.1
(Terminal flatness)
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
• Header
Dimension table (mm)
No. of contacts A B
20 8.20 4.50
22 8.70 5.00
30 10.70 7.00
40 13.20 9.50
50 15.70 12.00
60 18.20 14.50
70 20.70 17.00
80 23.20 19.50
100 28.20 24.50
120 33.20 29.50
0.5±0.05
0.5±0.05
B±0.1
0.2±0.03
A
1.44
Suction
face 3.8
(1.4)
(1.4)
1.8 4.6
C
D
0.20±0.03
0.1
(Terminal flatness)
Mated height C D
3.0 mm 2.4 0.85
3.5 mm 2.9 1.35
mm General tolerance: ±0.2
• Socket and header are mated
A
+0.2
–0.1
Mated height A
3.0 mm 3.0
3.5 mm 3.5
Note) P5KS series (mated heights 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, and 9.0mm)
cannot be mated to this type.
P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type
• Socket
Dimension table (mm)
No. of contacts A B
20 8.20 4.50
24 9.20 5.50
30 10.70 7.00
34 11.70 8.00
36 12.20 8.50
40 13.20 9.50
50 15.70 12.00
60 18.20 14.50
70 20.70 17.00
80 23.20 19.50
100 28.20 24.50
;;
;;
;
;;
;
;;
;
;;
;;
A
B±0.1
0.50±0.05
1.82
(Suction face)
4.6
0.50±0.05
0.20±0.03
0.10
3.20
5.4
(1.10)
(1.10)
C
0.15±0.03
Mated height C
4.0 mm, 5.0 mm, 6.0 mm 3.05
4.5 mm, 5.5 mm, 6.5 mm 3.55
7.0 mm, 8.0 mm, 9.0 mm 6.05
• Header
Dimension table (mm)
No. of contacts A B
20 8.20 4.50
24 9.20 5.50
30 10.70 7.00
34 11.70 8.00
36 12.20 8.50
40 13.20 9.50
50 15.70 12.00
60 18.20 14.50
70 20.70 17.00
80 23.20 19.50
100 28.20 24.50
0.10
B±0.1
A
0.20±0.03
1.72
4.2
C 0.9
0.50±0.050.50±0.05
0.20±0.03
4.30
1.95
(1.1)(1.1) 2.8
5.0
(Suction face)
Mated height C D
4.0 mm, 4.5 mm, 7.0 mm 0.95 3.3
5.0 mm, 5.5 mm, 8.0 mm 1.95 4.3
6.0 mm, 6.5 mm, 9.0 mm 2.95 5.3
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
• Socket and header are mated
Note) P5K series (mated heights 3.0mm, 3.5mm)
cannot be mated to this type.
H+0.2
–0.1
Mated height H
4.0 mm 4.0
4.5 mm 4.5
5.0 mm 5.0
5.5 mm 5.5
6.0 mm 6.0
6.5 mm 6.5
7.0 mm 7.0
8.0 mm 8.0
9.0 mm 9.0
mm General tolerance: ±0.2
P5KS: Mated height 4.0mm, 4.5mm for 120 contacts and 160 contacts types, 6.5mm for 130 contacts type
• Socket
No. of contacts A B C
120 32.50 29.50 32.00
130 35.00 32.00 34.50
160 42.50 39.50 42.00
0.50±0.05
0.20±0.03
B±0.1
A
4.6
C±0.1 0.50±0.05 dia.
3.00±0.08
1.82 (Suction face)
0.10
Terminal flatness
0.15±0.03
D
0.45
(1.10)
(1.10)
5.43.20
Mated height D
4.0 mm 3.05
4.5 mm, 6.5 mm 3.55
• Header
No. of contacts A B C
120 32.50 29.50 31.00
130 35.00 32.00 33.50
160 42.50 39.50 41.00
0.10
A
B±0.10
0.50±0.05
0.20±0.03
4.20
1.72
(Suction face)
3.30
0.95
Note 1)
0.20±0.03
5.00
(1.10)
(1.10) 2.80
2.10±0.08
C±0.10
0.50±0.05 dia.
0.45
Mated height D E
4.0 mm, 4.5 mm 3.30 0.95
6.5 mm 5.30 2.95
• Socket and header are mated
Notes) 1. Inquiry separately for diagrams of the
embossed tape and cautions for use.
2. Be sure to ask for proper specifications and
drawings before actual use.
H+0.2
−0.1
Mated height H
4.0 mm 4.0
4.5 mm 4.5
6.5 mm 6.5
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
EMBOSSED TAPE DIMENSIONS (unit:mm, Common for respective contact type, socket and header)
Dimension table (mm)
(1) Suffix: G (1 reel, 1,500 pieces or 1,000 pieces embossed tape and plastic reel package)
(2) Suffix: J (1 reel, 1,500 pieces embossed tape and paper reel package)
(3) Suffix: P (1 reel, 1,000 pieces embossed tape and paper reel package)
Type Mated height No. of contacts Type of taping A B C D E F Quantity per reel
P5KS
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 7.0mm
20 to 50 Tape I 24.0 — 11.5 12.0 25.4±1 380 dia.
1,500 pcs.
60 to 70 Tape II 32.0 28.4 14.2 12.0 33.4±1 380 dia.
80 to 100 Tape II 44.0 40.4 20.2 12.0 45.4±1 380 dia.
120 to 160 Tape II 56.0 52.4 26.2 12.0 57.4±1 380 dia.
Socket: 7.0mm, 8.0mm, 9.0mm
Header: 5.0mm, 5.5mm, 6.0mm,
6.5mm, 8.0mm, 9.0mm
20 to 50 Tape I 24.0 — 11.5 12.0 25.4±1 380 dia.
1,000 pcs.
60 to 70 Tape II 32.0 28.4 14.2 12.0 33.4±1 380 dia.
80 to 100 Tape II 44.0 40.4 20.2 12.0 45.4±1 380 dia.
130 Tape II 56.0 52.4 26.2 12.0 57.4±1 380 dia.
Type Mated height No. of contacts Type of taping A B C D E F Quantity per reel
P5K Socket and header are common
3.0mm, 3.5mm
20 to 50 Tape I 24.0 — 11.5 12.0 24.4 370 dia.
1,500 pcs.
60 to 70 Tape II 32.0 28.4 14.2 12.0 32.4 370 dia.
80 to 100 Tape II 44.0 40.4 20.2 12.0 44.4 370 dia.
120 Tape II 56.0 52.4 26.2 12.0 56.4 370 dia.
P5KS
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 7.0mm
20 to 50 Tape I 24.0 — 11.5 12.0 24.4 370 dia.
60 to 70 Tape II 32.0 28.4 14.2 12.0 32.4 370 dia.
80 to 100 Tape II 44.0 40.4 20.2 12.0 44.4 370 dia.
120 to 160 Tape II 56.0 52.4 26.2 12.0 56.4 370 dia.
Type Mated height No. of contacts Type of taping A B C D E F Quantity per reel
P5K Socket and header are common
3.0mm, 3.5mm
20 to 50 Tape I 24.0 — 11.5 12.0 24.4 330 dia.
1,000 pcs.
60 to 70 Tape II 32.0 28.4 14.2 12.0 32.4 330 dia.
80 to 100 Tape II 44.0 40.4 20.2 12.0 44.4 330 dia.
120 Tape II 56.0 52.4 26.2 12.0 56.4 330 dia.
P5KS
Socket: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 6.0mm, 6.5mm
Header: 4.0mm, 4.5mm, 5.0mm,
5.5mm, 7.0mm, 8.0mm
20 to 50 Tape I 24.0 — 11.5 12.0 24.4 330 dia.
60 to 70 Tape II 32.0 28.4 14.2 12.0 32.4 330 dia.
80 to 100 Tape II 44.0 40.4 20.2 12.0 44.4 330 dia.
120 to 160 Tape II 56.0 52.4 26.2 12.0 56.4 330 dia.
Socket: 7.0mm, 8.0mm, 9.0mm
Header: 6.0mm, 6.5mm, 9.0mm
20 to 50 Tape I 24.0 — 11.5 12.0 24.4 370 dia.
60 to 70 Tape II 32.0 28.4 14.2 12.0 32.4 370 dia.
80 to 100 Tape II 44.0 40.4 20.2 12.0 44.4 370 dia.
130 Tape II 56.0 52.4 26.2 12.0 56.4 370 dia.
• Tape dimensions (Conforming to JIS C 0806-1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
Tape I Tape II
1.75
C
D
A±0.3
4
2
1.5 dia.
+0.1
0
Pull out direction
1.75
C
D
A±0.3
4
2
Pull out direction
B
1.5 dia.
+0.1
0
• Plastic reel dimensions (Conforming to EIAJ ET-7200B)/
Paper reel dimensions (Conforming to JIS C 0806-1990)
F
E
Top cover tape
Emboss carrier tape
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
+2
0
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
Connector orientation with respect to direction of progress of embossed tape
NOTES
Type
Direction
of tape progress
P5K P5KS (Less than 100 contacts) P5KS 120, 130, 160 contacts
Socket
Header
Socket
Header
Socket
Header
Note: There is no indication on this product
regarding top-bottom or left-right
orientation.
This corner is oriented on the C side.
This corner is oriented on the C side.
This corner is oriented on the C side.
This corner is oriented on the C side.
1. Prevention of reverse mating
Other than 120, 130, 160 contacts type,
the socket and header are protected from
reverse mating by a molded resin key.
Excessive mating force may damage the
key, so be sure to match chamfered
corners when mating.
2. PC Boards and Recommended
Metal Mask Patterns
Connectors are mounted with high
density, with a pitch interval of 0.4 to 0.5
mm. It is therefore necessary to make
sure that the right levels of solder are
used, in order to reduce solder bridge
and other issues. The figures to the right
are recommended metal mask patterns.
Please use them as a reference.
Chamfered corner
Chamfered corner
Chamfered corner Chamfered corner
Outline (top view)
Chamfered corner
Mating state
• P5K Socket
Recommended PC board pattern
(TOP VIEW)
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 56%)
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Opening area ratio: 69%)
0.50±0.05
0.50±0.05
0.25±0.05
3.20±0.05
MIN 6.80
B±0.05
0.75±0.05
0.125±0.05
0.23±0.01
0.50±0.01 0.50±0.01
6.80±0.01
(1.10) (1.10)
4.60±0.01
B±0.01
0.50±0.01 0.50±0.01
0.23±0.01
6.80±0.01
4.10±0.01
(1.35) (1.35)
B±0.01
• P5K Header
Recommended PC board pattern
(TOP VIEW)
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 62%)
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Opening area ratio: 78%)
1.00±0.05
MIN 5.60
0.50±0.05
0.50±0.05
0.25±0.05
0.75±0.05
B±0.05
0.125±0.05
0.23±0.01
5.60±0.01
0.50±0.01 0.50±0.01
(1.55) (1.55)
2.50±0.01
B±0.01
0.50±0.01 0.50±0.01
5.60±0.01
0.23±0.01
(1.95)(1.95)
1.70±0.01
B±0.01
* See the dimension table on page 70 for more information on the B dimension of the socket and header.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
AXK(5(S)/6(S))
P5KS: Mated height 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 8.0mm, 9.0mm type
• Socket
• Header
P5KS: Mated height 4.0mm, 4.5mm for 120 contacts and 160 contacts types, 6.5mm for 130 contacts type
• Socket
• Header
Recommended PC board pattern
(TOP VIEW)
0.125±0.05
MIN 6.40
2.40±0.05
0.50±0.05 0.50±0.05
0.25±0.05
0.75±0.05
B±0.05
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 60%)
0.23±0.01
0.50±0.01 0.50±0.01
6.40±0.01
(1.30) (1.30)
3.80±0.01
B±0.01
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Opening area ratio: 76%)
0.50±0.01 0.50±0.01
0.23±0.01
6.40±0.01
3.10±0.01
(1.65)
(1.65)
B±0.01
* See the dimension table on page 71 for more information on the B dimension.
Recommended PC board pattern
(TOP VIEW)
MIN 6.00
0.50±0.05 0.50±0.05
0.25±0.05
0.75±0.05
2.00±0.05
B±0.05
0.125±0.05
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 69%)
0.23±0.01
0.50±0.01 0.50±0.01
6.00±0.01
(1.50)
3.00±0.01
(1.50)
B±0.01
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Opening area ratio: 87%)
0.50±0.01 0.50±0.01
0.23±0.01
6.00±0.01
(1.90) (1.90)
2.20±0.01
B±0.01
* See the dimension table on page 71 for more information on the B dimension.
Recommended PC board pattern
(TOP VIEW)
0.50±0.05
0.25±0.05
B±0.05
0.5±0.05
2.40±0.05
(Pattern
dimensions)
Min6.4
3.00±0.05
(Positioning
boss
dimentions)
C±0.05
0.125±0.05
2-0.65±0.05 dia. (hole)
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 60%)
0.23±0.01
0.50±0.01 0.50±0.01
6.00±0.01
(1.50)
3.00±0.01
(1.50)
B±0.01
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Opening area ratio: 76%)
0.50±0.01 0.50±0.01
0.23±0.01
6.40±0.01
3.10±0.01
(1.65)
(1.65)
B±0.01
* See the dimension table on page 72 for more information on the B and C dimensions.
Recommended PC board pattern
(TOP VIEW)
0.50±0.05
0.25±0.05
B±0.05
0.50±0.05
2-0.65±0.05 dia. (hole)
C±0.05
MIN 6.00
0.125±0.05
2.10±0.05
(Positioning
boss
dimentions)
2.00±0.05
(Pattern
dimensions)
Recommended metal mask pattern
Metal mask thickness: Here, 150 µm
(Opening area ratio: 69%)
0.23±0.01
0.50±0.01 0.50±0.01
6.00±0.01
(1.50)
3.00±0.01
(1.50)
B±0.01
Recommended metal mask pattern
Metal mask thickness: Here, 120 µm
(Opening area ratio: 87%)
0.50±0.01 0.50±0.01
0.23±0.01
6.00±0.01
(1.90) (1.90)
2.20±0.01
B±0.01
* See the dimension table on page 72 for more information on the B and C dimensions.
Regarding general notes, please refer
to page 12.
For other details, please verify with the
product specification sheets.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
