Subminiature Coaxial Switch 1.35mm High, DC to 11GHz MS-156C Series Overview Features 1. Low insertion loss 0.15 dB MAX (DC to 2.5GHz) 0.2 dB MAX (2.5GHz to 6GHz) 0.4 dB MAX (6GHz to 11GHz) (NORMALLY CLOSED) Space-saving design Low profile: 1.35mm protrusion above the board. Lightweight: 0.014g. total weight. 2. Space-saving design 2.3mm x 2.3mm occupied board space. 3. Low profile MS-156C Series 1.35mm high above the board. 4. Lightweight Comparison with our conventional type 0.014g. total weight 5. Durability 100 mating/unmating cycles, with corresponding plug. Conventional type MS-156C3 Footprint 2.7 2.3 7. B o a r d p l a c e m e n t w i t h a u t o m a t i c equipment Packaged on tape-and-reel. 8. Halogen Free, Beryllium free Chlorine, and bromine are not used in the receptacles. *Definition according to IEC 61249-2-21. Br 900 ppm max., Cl 900 ppm max., and Br + Cl 1500 ppm max. 2.3 27% saving of space Height 1.35 Applicable frequencies range over a wide band, from DC to 11GHz. 2.7 6. Performs over a wide frequency range 1.6 May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. Developed for inspection of high frequency circuits used in portable terminals.Verification of the circuit performance is accomplished by simply inserting the external plug in the board mounted receptacle.This action re-directs the circuit from normal condition to the plug side. Removing the plug restores circuit to its normal condition. 15% lower profile Weight 0.025g 0.014g 44% lighter weight In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 2015.12e 1 MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz Product Specifications Unmated Mated with MS-156-HRMJ-3 plug Operating temperature range Rated power Frequency range -40c to +85c -40c to +85c 2W DC to 11GHz 1.2 max.(DC to 2.5GHz) 2W DC to 8GHz V.S.W.R. 1.3 max.(2.5GHz to 6.0GHz) 1.4 max.(DC to 3.0GHz) 1.8 max.(3.0GHz to 8.0GHz) 1.5 max.(6.0GHz to 11.0GHz) 0.15dB max.(DC to 2.5GHz) Insertion loss May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. Isolation 0.5dB max.(DC to 3.0GHz) 0.2dB max.(2.5GHz to 6.0GHz) 0.8dB max.(3.0GHz to 6.0GHz) 0.4dB max.(6.0GHz to 11.0GHz) 20dB min.(DC to 3.0GHz) 15dB min.(3.0GHz to 6.0GHz) 12dB min.(6.0GHz to 11.0GHz) 0.9dB max.(6.0GHz to 8.0GHz) Item 1.Contact resistance 2.Insulation resistance 3.Withstanding voltage 4.Vibration Specification 100mA max. 100V DC 100V AC / 1 minute Frequency:10 to 55Hz, single amplitude of No electrical discontinuity of 1s or 0.75mm, 2 hours in each of the 3 axis. Acceleration of 490m/s2, 6ms duration, sine half-wave more 5.Shock 6.Temperature cycle 7.High temperature exposure 8.Low temperature exposure 9.Humidity Contact resistance : 100mo max. Insulation resistance : 10Mo min. Contact resistance : 100mo max. Insulation resistance : 10Mo min. Contact resistance : 100mo max. Insulation resistance : 10Mo min. Contact resistance : 100mo max. Insulation resistance : 10Mo min. 10. Durability (mating/un-mating, with corresponding plug) Conditions 100mo max. 1000Mo min. No flashover or insulation breakdown Contact resistance : 100mo max. waveform, 3 cycles in each of the 3 axis, 18 times in total. Temperature: -55c / +5c to +35c / +85c /+5c to +35c Time : 30 / 5 max. / 30 / 5 max. (Minutes) 50 cycles 96 hours at 85c 96 hours at -55c 96 hours at 402c, and humidity of 90 to 95% 100 cycles Note 1: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials / Finish 2 Part Material Finish Remarks Shell Phosphor bronze Gold plated --------------------------- Insulator 6T Nylon --------------------------- UL94HB Common terminal Cu-Ni-Si alloy Selective gold plated --------------------------- Antenna terminal Phosphor bronze Selective gold plated --------------------------- MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz BTypical Data NORMALLY CLOSED(N.C) 2.0 0.0 1.9 0.2 V.S.W.R. 1.7 0.6 1.6 0.8 1.5 1.0 1.4 1.2 V.S.W.R. 1.3 1.4 1.2 1.6 1.1 1.8 1.0 0 1 2 3 4 5 6 7 8 9 10 2.0 11 [GHz] 3.0 0.0 2.8 0.2 2.6 0.4 V.S.W.R. 2.4 0.6 Insertion loss 2.2 0.8 2.0 1.0 1.8 1.2 V.S.W.R. 1.6 1.4 1.4 1.6 1.2 1.8 1.0 0 1 2 3 4 5 6 Insertion loss [dB] NORMALLY OPEN(N.O) 2.0 8 [GHz] 7 ISOLATION 0 5 10 Isolation May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 0.4 Insertion loss Insertion loss [dB] 1.8 15 20 25 30 Isolation 35 40 45 50 0 1 2 3 4 5 6 7 8 9 10 11 [GHz] 3 MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz Receptacle '#( '#( %#+ &#.' HRS No. Packing MS-156C3 358-0346-0 10,000 pcs/reel MS-156C3(20) 358-0346-0 20 2,000 pcs/reel &#(* May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. Part No. 6iZgb^cVa 8iZgb^cVa Circuit diagram G G G B C B C G G G G Plug '%#+ A A MS-156C3 Plug %#(* G NORMALLY OPEN (N.O) %#(* NORMALLY CLOSED (N.C) '%#+ '&#& MS-156C3 BPCB mounting pattern and metal mask dimensions * Request drawing of the specific part for exact dimensions and tolerances. * Specified dimensions must be followed to assure correct board placement and performance. BZiVabVhY^bZch^dch E87bdjci^c\eViiZgc %#&i]^X '& '%#. '%#* &#. %#)&#)) %#( &#, %#( I]^hVgZVbjhiWZ[gZZd[XdcYjXi^kZigVXZhVcYgZh^hi[^ZaY# 4 &#( %#) %#)- &#+ '#) ' &#&+ '#* %#* %#) %#* 8 %# ( '&#''#) MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz BPrecautions May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 1. Mounting this product using PCB patterns or metal mask dimensions other than the ones specified, may result in a product malfunction due to solder and/or flux wicking. 2. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces. Placing conductive traces in this area may affect performance and will void product warranties. When the bottom surface of the product (i.e., the shaded area of the specified land dimensions diagram on the previous page) has been processed with a susbtrate copper trace and resist processing, Hirose Electric will not be able to warrant the product. 3. Do not use hand soldering for mounting of MS-156C3. Doing so could result in solder and flux wicking to the contact areas. 4. Exercise caution as not to allow any debris to enter the board mounted MS-156C when cutting PCB. -Example of a PCB after mounting the MS-156C3(Position relation between MS-156C3 and the web tab) -Example of incorrect mounting- -Recommended exampleDesign with no web tab near MS-156C3 Web tab Mounted substrate MS-156C3 If the MS-156C3 is mounted too close to a web tab, there is a possibility that fine powder residue generated during depaneling could infiltrate the MS-156C3 swich and cause damage. MS-156C3 Optimal design with no web tab near the MS-156C3. 5. This product is intended for use only in testing the circuit. It cannot be used as an interface. 6. Please refrain from using the product in environments specifically affected by excessive vibration, shock, dust, high humidity, gases, very high temperatures and very low temperatures such as outdoor equipment. It might cause degradation or destruction of the product.Even if it endures during a short time, long time quarification is not quaranteed. 7. Plugs can be roughly classified to two types. - For mass production line automatic check (Press down type) - For manual check (With retentive lock) : Unable to be used at production line. 8. Do not use the washing process. 9. Please use a design in which the device housing does not exert pressure or force on the MS-156C in the event that the finished device is accidently dropped. 10. Do not apply heat(heat gun or hot plate) over 260c for more than 10 seconds. Exceeding this thermal limit could cause the resin to melt and cause deformation. 11. When automatic inspections are to be performed during the manufacturing operations, request the MS-156 plug connector manual for examples of implementation. 5 MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz BPacking Specifications ) ' &#.* 8iZgb^cVa 8iZgb^cVa 9 6iZgb^cVa 6iZgb^cVa &' &' ' &#,* &#,* ) 9 ) ) *#* *#* 6iZgb^cVa 6iZgb^cVa &#* &#* MS-156C3 8iZgb^cVa8iZgb^cVa 9 JcgZZa^c\Y^gZXi^dc JcgZZa^c\Y^gZXi^dc : May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. : Reel dimentions &'#) *%bVm# G ( & JcgZZa^c\Y^gZXi^dc Part No. Reel Size Packing MS-156C3 R = O380mm 10,000 pcs/reel MS-156C3(20) R = O180mm 2,000 pcs/reel BRecommended Temperature Profile 10 sec.max. Temperature (c) 260 230 220 200 180 Using Lead-free Solder paste : 260c q Maximum temperature 150 100 50 Time (sec.) 60 sec. to 120 sec. 40 sec.max. 60 sec. to 150 sec. 6 w Peak temperature time : 10 sec. max. e 230c min. : 40 sec. max. r 220c min. : 60 sec. to 150 sec. t 180c to 200c : 60 sec. to 120 sec. y Metal mask thickness : 0.1 mm : 2 cycles u Reflow cycles MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz BMS-156C Series plugs and adapters <product name> <Page> Cable harness type Press down, right angle type .................................MS-156-C(LP)-1 8 .................................MS-156-088LP-H1 8 Needs a test fixture with a floating mechanism for installation. Simplified lock, right angle type May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. For evaluation Cannot be used for automated inspection process. For antenna type MS-156-088LP-H2 .................................MS-156C-LP-068 8 .................................MS-156-HRMJ-H1 9 Cannot be used for circuit inspection. SMA conversion Adapters Simplified lock type For evaluation Cannot be used for automated inspection process. Press down type Needs a test fixture with a floating mechanism for installation. Right angle type .................................MS-156-HRMJ-3 MS-156-HRMJ-14 .................................MS-156LP-HRMJ-8 9 9 9 .................................MS-156-HRMJ-10 10 MS-156-HRMJ-12 10 MS-156-HRMJ-29 10 SMA Conversion Adapter .................................MS-156R-HRMJ-1 11 N Conversion Adapter .................................MS-156R-NJ-1 11 Floating (self-pressing) Built-in, spring loaded push-down mechanism Stroke length controlled by fixture. Adapter for plug inspection When automatic inspections are to be performed during the manufacturing operations, request the instruction manual titled "MS-156 Plug Connector" which includes examples of actual use. 7 MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz Plugs )" '%#. '#. - - + ) &&#&* 8 & Press down, right angle (#' Part No. HRS No. MS-156-C(LP)-1 Durability 358-0173-0 10,000 Times Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.) May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. Simplified lock, right angle, short 1.3 15 .5 O6 8.1 4.27 5.8 O3.6 O3 3.2 O2.5 Part No. MS-156-088LP-H1 HRS No. Durability 358-0268-5 500 Times Applicable cable: DFS111-UL1979 (Junkosha Ltd.) Please contact Hirose Sales Representative for cable length and cable end treatment. Simplified lock, right angle, long 1.6 21.8 14.9 .5 O6 4.27 5.8 O3.6 O3 10 O2.5 Part No. MS-156-088LP-H2 Durability 358-0275-0 500 Times Applicable cable: DFS111-UL1979 (Junkosha Ltd.) Please contact Hirose Sales Representative for cable length and cable end treatment. 1.13 Dia 3 Simplified lock, right angle, for antenna HRS No. 2.5 5.9 Part No. MS-156C-LP-068 HRS No. Durability 358-0276-3 30 Times Applicable cable: RF-MF50161 (Nissei Electric Co., Ltd.) Please contact Hirose Sales Representative for cable length and cable end treatment. 8 MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz SMA Conversion Adapters Simplified lock - %#* (#+ ( &#+ - #* &$)"(+JCH"'6 '&#.-#&*#. Part No. Durability 358-0290-4 500 Times Press down, with flange, short 28.13 18.63 1 8 2O2.6 14 O3.4 O5 8.12 1/4-36UNS-2A O20 Part No. HRS No. Durability MS-156-HRMJ-3 358-0171-5 10,000 Times Press down, with flange, long 33.01 23.51 8 1 2O2.6 14 O5 O3.4 13 1/4-36UNS-2A O20 Part No. HRS No. Durability MS-156-HRMJ-14 358-0198-1 10,000 Times Press down, with flange, right angle 29.23 18.63 7.9 14 O3.4 O7.9 7.73 8 10.6 1 O5.4 1/4-36UNS-2A .6 O2 2x O20 May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. MS-156-HRMJ-H1 HRS No. Part No. HRS No. Durability MS-156LP-HRMJ-8 358-0289-5 100,000 Times 9 MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz Floating (Self-Pressing) 38.6 13 28.24 2O2.6 2.5 O3.8 20 O10.3 O5.4 11.75 O2 4 1.45 1/4-36UNS-2A Part No. HRS No. Durability MS-156-HRMJ-10 358-0194-0 10,000 Times Floating (Self-Pressing) 12 May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 39.85 2O2.6 2.5 29.49 O4.3 20 O5.9 O10.3 11.75 O24 3.75 1/4-36UNS-2A Part No. HRS No. Durability MS-156-HRMJ-12 358-0196-6 10,000 Times Floating (Self-Pressing) 38.6 28.24 12 8 2.5 11.2 2O2.6 2O2.1 O24 O3.4 20 17 O12 O5.4 3.3 10 Part No. HRS No. Durability MS-156-HRMJ-29 358-0295-8 200,000 Times MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz Adapter for plug inspection SMA Conversion Adapter 16.05 3 6.3 8.3 O2 O9 O6 0.75 Part No. HRS No. Durability MS-156R-HRMJ-1 358-0188-8 500 Times N Conversion Adapter 41.9 13.21 14.3 2.54 O2 O5.45 0.75 O2 5/8-24UNEF-2A 2 May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. 1/4-36UNS-2A Part No. HRS No. Durability MS-156R-NJ-1 358-0176-9 500 Times 11 May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved. MS-156C SeriesSubminiature Coaxial Switch 1.35mm High, DC to 11GHz USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS 2300 Warrenville Road, Suite 150, Downers Grove, Illinois 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 2841 Junction Ave, Suite 200 San Jose, Ca. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : +49-711-4560-02-1 Fax : +49-711-4560-02-299 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE Muggenhofer Str. 136 90429 Nuernberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 92250, France Phone : +33 (0) 1 7082 3170 Fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose.com/tw/ KOREA: HIROSE KOREA CO., LTD. 250, Huimanggongwon-ro, Siheung-si, Gyeonggi-do, Korea, 429-849 Phone : +82-31-496-7000,7124 Fax : +82-31-496-7100 http://www.hirose.co.kr/ SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-16, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India 079903, Singapore Phone : +91-12-660-8018 Phone : +65-6324-6113 Fax : +91-120-4804949 Fax : +65-6324-6123 http://www.hirose.com/sg/ http://www.hirose.com/sg/ MALAYSIA: HIROSE ELECTRIC MALAYSIA PTE. LTD. 1-10-07, Suntech @ Penang Cybercity (1164),Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/ (R) 12 INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 12/2015. Contents are subject to change without notice for the purpose of improvements.