1
Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
MS-156C Series
2015.12e
■Features
1. Low insertion loss
0.15 dB MAX (DC to 2.5GHz)
0.2 dB MAX (2.5GHz to 6GHz)
0.4 dB MAX (6GHz to 11GHz)
(NORMALLY CLOSED)
2. Space-saving design
2.3mm x 2.3mm occupied board space.
3. Low profile
1.35mm high above the board.
4. Lightweight
0.014g. total weight
5. Durability
100 mating/unmating cycles, with corresponding
plug.
6.
Performs over a wide frequency range
Applicable frequencies range over a wide band,
from DC to 11GHz.
7.
Board placement with automatic
equipment
Packaged on tape-and-reel.
8.
Halogen Free, Beryllium free
Chlorine, and bromine are not used in the
receptacles.
*Definition according to IEC 61249-2-21.
Br 900 ppm max., Cl 900 ppm max., and Br + Cl
1500 ppm max.
■Overview
Developed for inspection of high frequency
circuits used in portable terminals.Verification of
the circuit performance is
accomplished by
simply inserting the external plug
in the board
mounted receptacle.This action re-directs the
circuit from normal condition to the plug side.
Removing the plug restores circuit to its normal
condition.
MS-156C Series
Space-saving design
Low profile: 1.35mm protrusion above the board.
Lightweight: 0.014g. total weight.
Comparison with our conventional type
●Footprint
Conventional type MS-156C3
●Height
●Weight
2.7 2.3
2.7
2.3
1.6
1.35
27% saving of space
0.025g 0.014g
15% lower profile
44% lighter weight
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
2
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
■Product Specifications
Unmated Mated with MS-156-HRMJ-3 plug
Operating
temperature range -40ç to +85ç -40ç to +85ç
Rated power 2W 2W
Frequency range DC to 11GHz DC to 8GHz
V.S.W.R.
1.2 max. (DC to 2.5GHz)
1.3 max. (2.5GHz to 6.0GHz)
1.5 max. (6.0GHz to 11.0GHz)
1.4 max. (DC to 3.0GHz)
1.8 max. (3.0GHz to 8.0GHz)
Insertion loss
0.15dB max. (DC to 2.5GHz)
0.2dB max. (2.5GHz to 6.0GHz)
0.4dB max. (6.0GHz to 11.0GHz)
0.5dB max. (DC to 3.0GHz)
0.8dB max. (3.0GHz to 6.0GHz)
0.9dB max. (6.0GHz to 8.0GHz)
Isolation
20dB min.(DC to 3.0GHz)
15dB min.(3.0GHz to 6.0GHz)
12dB min.(6.0GHz to 11.0GHz)
Item Specification Conditions
1. Contact resistance 100mø max. 100mA max.
2. Insulation resistance 1000Mø min. 100V DC
3. Withstanding voltage No flashover or insulation breakdown 100V AC / 1 minute
4. Vibration
No electrical discontinuity of 1µs or
more
Frequency: 10 to 55Hz, single amplitude of
0.75mm, 2 hours in each of the 3 axis.
5. Shock
Acceleration of 490m/s
2
, 6ms duration, sine half-wave
waveform, 3 cycles in each of the 3 axis, 18 times in total.
6. Temperature cycle Contact resistance : 100mø max.
Insulation resistance : 10Mø min.
Temperature: -55ç / +5ç to +35ç / +85ç /+5ç to +35ç
Time : 30 / 5 max. / 30 / 5 max. (Minutes)
50 cycles
7. High temperature exposure Contact resistance : 100mø max.
Insulation resistance : 10Mø min. 96 hours at 85ç
8. Low temperature exposure Contact resistance : 100mø max.
Insulation resistance : 10Mø min. 96 hours at -55ç
9. Humidity Contact resistance : 100mø max.
Insulation resistance : 10Mø min. 96 hours at 40±2ç, and humidity of 90 to 95%
10.
Durability (mating/un-mating,
with corresponding plug)
Contact resistance : 100mø max. 100 cycles
Note 1: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials / Finish
Part Material Finish Remarks
Shell Phosphor bronze Gold plated ---------------------------
Insulator 6T Nylon --------------------------- UL94HB
Common terminal Cu-Ni-Si alloy Selective gold plated ---------------------------
Antenna terminal Phosphor bronze Selective gold plated ---------------------------
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
3
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
BTypical Data
●NORMALLY CLOSED(N.C)
●NORMALLY OPEN(N.O)
●ISOLATION
V.S.W.R.
01234567891011[GHz]
[GHz]
[GHz]
V.S.W.R.
Insertion loss [dB]
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Insertion loss
V.S.W.R.
012345678
V.S.W.R.
Insertion loss [dB]
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Insertion loss
01234567891011
Isolation
50
45
40
35
30
25
20
15
10
5
0
Isolation
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
4
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
'&#&
%#(*
%#(*
'%#+ '%#+
8iZgb^cVa 6iZgb^cVa
¢&#.'
&#(*
'#(
'#(
%#+
■Receptacle
BPCB mounting pattern and metal mask dimensions
'£%#*
'£&
'£&#-
&#(
&#+
'#)
%#)
%#)
'£%#.
%#*
%#*
'#*
'£'#)
&#.
%#( %#(&#,
%#)- %#)-
&#))
8%#(
I]^hVgZVbjhiWZ[gZZd[XdcYjXi^kZigVXZhVcYgZh^hi[^ZaY#
&#&+
'
E87bdjci^c\eViiZgc
%#&i]^X`
BZiVabVh`Y^bZch^dch
* Request drawing of the specific part for exact dimensions and tolerances.
* Specified dimensions must be followed to assure correct board placement and performance.
■Circuit diagram
Part No. HRS No. Packing
MS-156C3 358-0346-0 10,000 pcs/reel
MS-156C3(20) 358-0346-0 20 2,000 pcs/reel
MS-156C3 Plug MS-156C3
G
B
G
G
C
G
A
Plug
G
B
G
G
C
G
A
NORMALLY CLOSED (N.C) NORMALLY OPEN (N.O)
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
5
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
BPrecautions
MS-156C3
Web tab
Mounted substrate
-Example of incorrect mounting- -Recommended example-
-Example of a PCB after mounting the MS-156C3-
(Position relation between MS-156C3 and the web tab)
Optimal design with no web tab near
the MS-156C3.
MS-156C3
If the MS-156C3 is mounted too close to a web tab, there is a possibility that
fine powder residue generated during depaneling could infiltrate the MS-156C3
swich and cause damage.
Design with no web tab
near MS-156C3
1. Mounting this product using PCB patterns or metal mask dimensions other than the ones
specified, may result in a product malfunction due to solder and/or flux wicking.
2. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces.
Placing conductive traces in this area may affect performance and will void product warranties.
When the bottom surface of the product (i.e., the shaded area of the specified land
dimensions diagram on the previous page) has been processed with a susbtrate copper trace
and resist processing, Hirose Electric will not be able to warrant the product.
3. Do not use hand soldering for mounting of MS-156C3.
Doing so could result in solder and flux wicking to the contact areas.
4. Exercise caution as not to allow any debris to enter the board mounted MS-156C when cutting
PCB.
5. This product is intended for use only in testing the circuit.
It cannot be used as an interface.
6. Please refrain from using the product in environments specifically affected by excessive
vibration, shock, dust, high humidity, gases, very high temperatures and very low temperatures
such as outdoor equipment. It might cause degradation or destruction of the product.Even if it
endures during a short time, long time quarification is not quaranteed.
7. Plugs can be roughly classified to two types.
- For mass production line automatic check (Press down type)
- For manual check (With retentive lock) : Unable to be used at production line.
8. Do not use the washing process.
9. Please use a design in which the device housing does not exert pressure or force on the
MS-156C in the event that the finished device is accidently dropped.
10. Do not apply heat(heat gun or hot plate) over 260ç for more than 10 seconds. Exceeding this
thermal limit could cause the resin to melt and cause deformation.
11. When automatic inspections are to be performed during the manufacturing operations, request
the MS-156 plug connector manual for examples of implementation.
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
6
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
BRecommended Temperature Profile
10 sec.max.
260
Temperature (ç)
230
220
200
180
150
100
50
Time (sec.)
60 sec. to 120 sec. 40 sec.max. 60 sec. to 150 sec.
&#,*
*#*
&'
&#.*
:
¢&(
¢G
'
))
9
&'#)
¢&#*
JcgZZa^c\Y^gZXi^dc
JcgZZa^c\Y^gZXi^dc
8iZgb^cVa
6iZgb^cVa
6iZgb^cVa
8iZgb^cVa
9
:
¢*%bVm#
BPacking Specifications
●MS-156C3
q Maximum temperature
w Peak temperature time
e 230ç min.
r 220ç min.
t 180ç to 200ç
y Metal mask thickness
u Reflow cycles
: 0.1 mm
: 2 cycles
: 260ç
: 10 sec. max.
: 40 sec. max.
: 60 sec. to 150 sec.
: 60 sec. to 120 sec.
Using Lead-free Solder paste
●Reel dimentions
Part No.
MS-156C3
MS-156C3(20)
Reel Size
R = Ø380mm
R = Ø180mm
10,000 pcs/reel
2,000 pcs/reel
Packing
8iZgb^cVa
6iZgb^cVa
JcgZZa^c\Y^gZXi^dc
6iZgb^cVa
8iZgb^cVa
9
)
'
)
&#,**#*
&'
¢&#*
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
7
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
BMS-156C Series plugs and adapters
Cable harness type
Press down, right angle type ……………………………MS-156-C(LP)-1
……………………………MS-156-088LP-H1
MS-156-088LP-H2
<product name> <Page>
8
8
π Needs a test fixture with a floating
mechanism for installation.
π For evaluation
Cannot be used for automated inspection process.
π Cannot be used for circuit inspection.
Simplified lock, right angle type
Adapter for plug inspection
SMA Conversion Adapter ……………………………MS-156R-HRMJ-1
……………………………MS-156R-NJ-1
11
11N Conversion Adapter
SMA conversion Adapters
Simplified lock type ……………………………MS-156-HRMJ-H1
MS-156-HRMJ-14
……………………………MS-156-HRMJ-3
……………………………MS-156LP-HRMJ-8
……………………………MS-156-HRMJ-10
MS-156-HRMJ-12
MS-156-HRMJ-29
9
9
9
9
10
10
10
π For evaluation
Cannot be used for automated inspection process.
π Needs a test fixture with a floating
mechanism for installation.
Press down type
Right angle type
π
Built-in, spring loaded push-down mechanism
Stroke length controlled by fixture.
Floating (self-pressing)
When automatic inspections are to be performed during the manufacturing operations, request the instruction
manual titled "MS-156 Plug Connector" which includes examples of actual use.
……………………………MS-156C-LP-068 8For antenna type
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
8
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
■Plugs
●Press down, right angle
¢(#'
'%#.
¢)
¢+
)"8&
&&#&* '#.
-
-
●Simplified lock, right angle, short
Ø6.5
8.1
3.2
4.27 5.8
15
1.3
Ø2.5
Ø3
Ø3.6
●Simplified lock, right angle, long
Ø6.5
14.9
10
21.81.6
4.27 5.8
Ø3.6
Ø3
Ø2.5
●Simplified lock, right angle, for antenna
1.13 Dia
5.9
2.5 3
Part No. HRS No. Durability
MS-156-C(LP)-1 358-0173-0 10,000 Times
Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.)
Part No. HRS No. Durability
MS-156-088LP-H1 358-0268-5 500 Times
Applicable cable: DFS111-UL1979 (Junkosha Ltd.)
Please contact Hirose Sales Representative for cable length and
cable end treatment.
Part No. HRS No. Durability
MS-156-088LP-H2 358-0275-0 500 Times
Applicable cable: DFS111-UL1979 (Junkosha Ltd.)
Please contact Hirose Sales Representative for cable length and
cable end treatment.
Part No. HRS No. Durability
MS-156C-LP-068 358-0276-3 30 Times
Applicable cable: RF-MF50161 (Nissei Electric Co., Ltd.)
Please contact Hirose Sales Representative for cable length and
cable end treatment.
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
9
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
●Simplified lock
¢-#*
-
'&#.-
*#.-#&-
&#+
¢(#+
¢%#* (
&$)"(+JCH"'6
1/4-36UNS-2A
18.63
8.12
8
28.13
Ø20
14
Ø3.4
Ø5
1
2∞Ø2.6
● Press down, with flange, long
8
33.01
13
23.51
Ø3.4
Ø5
2∞Ø2.6
14
1/4-36UNS-2A
1
Ø20
● Press down, with flange, short
●Press down, with flange, right angle
Ø5.4
Ø3.4
7.73
18.63
29.23
10.6
1
1/4-36UNS-2A
2×Ø2.6
Ø20
7.9
14
8
Ø7.9
■SMA Conversion Adapters
Part No. HRS No. Durability
MS-156-HRMJ-H1 358-0290-4 500 Times
Part No. HRS No. Durability
MS-156-HRMJ-3 358-0171-5 10,000 Times
Part No. HRS No. Durability
MS-156-HRMJ-14 358-0198-1 10,000 Times
Part No. HRS No. Durability
MS-156LP-HRMJ-8 358-0289-5 100,000 Times
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
10
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
●Floating (Self-Pressing)
13
Ø3.8
11.75
28.24 2.5
38.6
20
1/4-36UNS-2A
1.45
Ø5.4
Ø10.3
Ø24
2∞Ø2.6
12
Ø4.3
Ø5.9
Ø10.3
11.75
29.49 2.5
39.85
3.75
20
1/4-36UNS-2A
Ø24
2∞Ø2.6
●Floating (Self-Pressing)
Ø12
17
20
Ø5.4
Ø3.4
2∞Ø2.6
2∞Ø2.1
12
8
3.3
2.5
11.2
28.24
38.6
Ø24
●Floating (Self-Pressing)
Part No. HRS No. Durability
MS-156-HRMJ-10 358-0194-0 10,000 Times
Part No. HRS No. Durability
MS-156-HRMJ-12 358-0196-6 10,000 Times
Part No. HRS No. Durability
MS-156-HRMJ-29 358-0295-8 200,000 Times
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
11
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
● SMA Conversion Adapter
Ø2
Ø6
8.3
Ø9
3 6.3
16.05
0.75
1/4-36UNS-2A
● N Conversion Adapter
0.75 13.21 2.54
41.9
14.3
5/8-24UNEF-2A
Ø2
Ø5.45
Ø22
■Adapter for plug inspection
Part No. HRS No. Durability
MS-156R-HRMJ-1 358-0188-8 500 Times
Part No. HRS No. Durability
MS-156R-NJ-1 358-0176-9 500 Times
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.
12
MS-156C Series●Subminiature Coaxial Switch 1.35mm High, DC to 11GHz
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 12/2015. Contents are subject to change without notice for the purpose of improvements.
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
USA:
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE
2841 Junction Ave, Suite 200
San Jose, Ca. 95134
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS
2300 Warrenville Road, Suite 150,
Downers Grove, Illinois 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
CHINA:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose.com/cn/
KOREA:
HIROSE KOREA CO., LTD.
250, Huimanggongwon-ro, Siheung-si,
Gyeonggi-do, Korea, 429-849
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE
Muggenhofer Str. 136 90429 Nuernberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
Bayernstr. 3, Haus C 30855 Langenhagen, Germany
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
GERMANY:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.com/eu/
FRANCE:
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
Regus La Garenne Colombes,Place de La Belgique,
71 Boulevard National La Garenne Colombes, 92250, France
Phone : +33 (0) 1 7082 3170
Fax : +33 (1) 7082 3101
http://www.hirose.com/eu/
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose.com/cn/
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/cn/
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose.com/tw/
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose.com/hk/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
Office NO.519, Regus-Green Boulevard, Level5, Tower C,
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
10 Anson Road #26-16, International Plaza
079903, Singapore
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose.com/sg/
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
MALAYSIA:
HIROSE ELECTRIC MALAYSIA PTE. LTD.
1-10-07, Suntech @ Penang Cybercity (1164),Lintang
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.
Phone : +604-619-2564
Fax : +604-619-2574
http://www.hirose.com/sg/
THAILAND:
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
Fax : +66-2-686-3433
http://www.hirose.com/sg/
May.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.