SMAJ5.0CA - Bourns, Inc.

Features

■ RoHS compliant*

■ Surface Mount SMA package

■ Standoff Voltage: 5.0 to 495 volts

■ Power Dissipation: 400 watts

Applications

■ IEC 61000-4-2 ESD (Min. Level 4)

■ IEC 61000-4-4 EFT

■ IEC 61000-4-5 Surge

Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)

SMAJ Transient Voltage Suppressor Diode Series

*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

Parameter Symbol Value Unit

Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 400 Watts

Peak Forward Surge Current

8.3 ms Single Half Sine Wave Superimposed on Rated Load

(JEDEC Method) (Note 3)

IFSM 40 Amps

Steady State Power Dissipation @ TL = 75 °C PM(AV) 1.0 Watts

Maximum Instantaneous Forward Voltage @ IPP = 35 A

(For Unidirectional Units Only) VF3.5 Volts

Operating Temperature Range TJ-55 to +150 °C

Storage Temperature Range TSTG -55 to +175 °C

1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.

2. Thermal Resistance Junction to Lead.

3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).

4. Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %.

General Information

The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop

increasingly smaller electronic components.

Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA)

size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 495 V and Breakdown

Voltage up to 550 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices

from 0 V to Minimum Breakdown Voltage.

Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the ﬂ at conﬁ guration

minimizes roll away.

How to Order

SMAJ 5.0 CA

Package

SMAJ = SMA/DO-214AC

Working Peak Reverse Voltage

5.0 = 5.0 VRWM (Volts)

Sufﬁ x

A = 5 % Tolerance Unidirectional Device

CA = 5 % Tolerance Bidirectional Device

*RoHS COMPLIANT

Asia-Paciﬁ c:

Tel: +886-2 2562-4117

Fax: +886-2 2562-4116

Europe:

Tel: +41-41 768 5555

Fax: +41-41 768 5510

The Americas:

Tel: +1-951 781-5500

Fax: +1-951 781-5700

www.bourns.com

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

SMAJ Transient Voltage Suppressor Diode Series

Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)

Unidirectional Device Bidirectional Device Breakdown Voltage

VBR (Volts)

Working

Peak

Reverse

Voltage

Maximum

Reverse

Leakage

@ VRWM

Maximum

Reverse

Voltage

@ IRSM

Maximum

Reverse

Surge

Current

Part

Number

Part

Marking

Part

Number

Part

Marking Min. Max. @ IT

(mA)

VRWM

(Volts) IR (μA) VRSM (Volts) IRSM (Amps)

SMAJ5.0A HE SMAJ5.0CA TE 6.40 7.00 10 5.0 800 / 1600 9.2 43.5

SMAJ6.0A HG SMAJ6.0CA TG 6.67 7.37 10 6.0 800 / 1600 10.3 38.8

SMAJ6.5A HK SMAJ6.5CA TK 7.22 7.98 10 6.5 500 / 1000 11.2 35.7

SMAJ7.0A HM SMAJ7.0CA TM 7.78 8.60 10 7.0 200 / 400 12.0 33.3

SMAJ7.5A HP SMAJ7.5CA TP 8.33 9.21 1.0 7.5 100 / 200 12.9 31.0

SMAJ8.0A HR SMAJ8.0CA TR 8.89 9.83 1.0 8.0 50 / 100 13.6 29.4

SMAJ8.5A HT SMAJ8.5CA TT 9.44 10.4 1.0 8.5 10 / 20 14.4 27.7

SMAJ9.0A HV SMAJ9.0CA TV 10.0 11.1 1.0 9.0 5 / 10 15.4 26.0

SMAJ10A HX SMAJ10CA TX 11.1 12.3 1.0 10 5 / 10 17.0 23.5

SMAJ11A HZ SMAJ11CA TZ 12.2 13.5 1.0 11 5.0 18.2 22.0

SMAJ12A IE SMAJ12CA UE 13.3 14.7 1.0 12 5.0 19.9 20.1

SMAJ13A IG SMAJ13CA UG 14.4 15.9 1.0 13 5.0 21.5 18.6

SMAJ14A IK SMAJ14CA UK 15.6 17.2 1.0 14 5.0 23.2 17.2

SMAJ15A IM SMAJ15CA UM 16.7 18.5 1.0 15 5.0 24.4 16.4

SMAJ16A IP SMAJ16CA UP 17.8 19.7 1.0 16 5.0 26.0 15.3

SMAJ17A IR SMAJ17CA UR 18.9 20.9 1.0 17 5.0 27.6 14.5

SMAJ18A IT SMAJ18CA UT 20.0 22.1 1.0 18 5.0 29.2 13.7

SMAJ20A IV SMAJ20CA UV 22.2 24.5 1.0 20 5.0 32.4 12.3

SMAJ22A IX SMAJ22CA UX 24.4 26.9 1.0 22 5.0 35.5 11.2

SMAJ24A IZ SMAJ24CA UZ 26.7 29.5 1.0 24 5.0 38.9 10.3

SMAJ26A JE SMAJ26CA VE 28.9 31.9 1.0 26 5.0 42.1 9.5

SMAJ28A JG SMAJ28CA VG 31.1 34.4 1.0 28 5.0 45.4 8.8

SMAJ30A JK SMAJ30CA VK 33.3 36.8 1.0 30 5.0 48.4 8.3

SMAJ33A JM SMAJ33CA VM 36.7 40.6 1.0 33 5.0 53.3 7.5

SMAJ36A JP SMAJ36CA VP 40 44.2 1.0 36 5.0 58.1 6.9

SMAJ40A JR SMAJ40CA VR 44.4 49.1 1.0 40 5.0 64.5 6.2

SMAJ43A JT SMAJ43CA VT 47.8 52.8 1.0 43 5.0 69.4 5.7

SMAJ45A JV SMAJ45CA VV 50 55.3 1.0 45 5.0 72.7 5.5

SMAJ48A JX SMAJ48CA VX 53.3 58.9 1.0 48 5.0 77.4 5.2

SMAJ51A JZ SMAJ51CA VZ 56.7 62.7 1.0 51 5.0 82.4 4.9

SMAJ54A RE SMAJ54CA WE 60 66.3 1.0 54 5.0 87.1 4.6

SMAJ58A RG SMAJ58CA WG 64.4 71.2 1.0 58 5.0 93.6 4.3

SMAJ60A RK SMAJ60CA WK 66.7 73.7 1.0 60 5.0 96.8 4.1

SMAJ64A RM SMAJ64CA WM 71.1 78.6 1.0 64 5.0 103 3.9

SMAJ70A RP SMAJ70CA WP 77.8 86.0 1.0 70 5.0 113 3.5

SMAJ75A RR SMAJ75CA WR 83.3 92.1 1.0 75 5.0 121 3.3

SMAJ78A RT SMAJ78CA WT 86.7 95.8 1.0 78 5.0 126 3.2

SMAJ85A RV SMAJ85CA WV 94.4 104 1.0 85 5.0 137 2.9

SMAJ90A RX SMAJ90CA WX 100 111 1.0 90 5.0 146 2.7

SMAJ100A RZ SMAJ100CA WZ 111 123 1.0 100 5.0 162 2.5

SMAJ110A SE SMAJ110CA XE 122 135 1.0 110 5.0 177 2.3

SMAJ120A SG SMAJ120CA XG 133 147 1.0 120 5.0 193 2.0

SMAJ130A SK SMAJ130CA XK 144 159 1.0 130 5.0 209 1.9

SMAJ150A SM SMAJ150CA XM 167 185 1.0 150 5.0 243 1.6

SMAJ160A SP SMAJ160CA XP 178 197 1.0 160 5.0 259 1.5

SMAJ170A SR SMAJ170CA XR 189 209 1.0 170 5.0 275 1.4

SMAJ434A 434U SMAJ434CA 434D 485 535 1.0 434 5.0 698 0.6

SMAJ495A 495U SMAJ495CA 495D 522 578 1.0 495 5.0 760 0.5

Notes: 1. Sufﬁ x ‘A’ denotes a 5 % tolerance unidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double.

2. Sufﬁ x ‘CA’ denotes a 5 % tolerance bidirectional device. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine

Wave of 8.3 ms Pulse Width.

Product Dimensions

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

SMAJ Transient Voltage Suppressor Diode Series

Recommended Footprint

Physical Speciﬁ cations

Case ...........................................Molded plastic per UL Class 94V-0

Polarity....................... Cathode band indicates unidirectional device

No cathode band indicates bidirectional device

Weight ..................................................0.002 ounces / 0.064 grams

DIMENSIONS: MM

(INCHES)

F D

Dimension SMA (DO-214AC)

A4.06 - 4.57

(0.160 - 0.180)

B2.29 - 2.92

(0.090 - 0.115)

C1.27 - 1.63

(0.050 - 0.064)

D0.15 - 0.31

(0.006 - 0.112)

E 4.83 - 5.59

(0.190 - 0.220)

F 0.05 - 0.20

(0.002 - 0.008)

G 2.01 - 2.62

(0.080 - 0.103)

H 0.76 - 1.52

(0.030 - 0.060)

DIMENSIONS: MM

(INCHES)

Dimension SMA (DO-214AC)

A (Max.) 2.70

(0.106)

B (Min.) 2.10

(0.083)

C (Min.) 1.27

(0.050)

100

050

25 75 100 150125 175 200

Ambient Temperature (

Peak Pulse Derating in Percent of

Peak Power or Current

°C)

10 x 1000 Waveform as Defined

by R.E.A.

Peak Forward Surge Current (Amps)

12 5 10 20 50 100

Number of Cycles at 60 Hz

Pulse Width 8.3 ms

Single Half Sine-Wave

(JEDEC Method)

100

0 1.0 2.0 3.0 4.0

T, Time (ms)

IP, Peak Pulse Current (%)

TA=25 °C

TR=10 µs

Half value= IRSM

Peak value (IRSM)

Pulse width (TP)

is defined as that point

where the peak current

decays to 50 % of IPSM.

10 x 1000 waveform

as defined by R.E.A.

Capacitance (pF)

10000

100

110 100 1000

Standoff Voltage (Volts)

1000

Bidirectional

TA = 25 °C

Unidirectional

100

1.0

0.1

0.1 µs 1.0 µs 10 µs 10 ms

TP, Pulse Width

PP, Peak Power (KW)

100 µs 1.0 ms

5.0 mm Lead Areas

TA = 25 °C

Non-repetitive

Pulse Waveform

Shown in Pulse Waveform Graph

1.0

0.6

0.8

0.4

0.2

0.0

050

25 75 100 150125 175 200

TL, Lead Temperature (°C)

RM(AV) Steady State Power Dissipation (W)

60 Hz Resistive or

Inductive Load

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

SMAJ Transient Voltage Suppressor Diode Series

Rating & Characteristic Curves

Pulse Derating Curve Maximum Non-Repetitive Surge Current

Pulse Waveform Typical Junction Capacitance

Pulse Rating Curve Steady State Power Derating Curve

.......

....... ..............

120 °

Index Hole

10 pitches (min.)

Direction of Feed

10 pitches (min.)

End

Trailer Device Leader

Start

CDDFN5-0504N - TVS/Steering Diode Array

Packaging Information

The product will be dispensed in tape and reel format (see diagram below).

Devices are packed in accordance with EIA 481

standard speciﬁ cations shown here.

DIMENSIONS: MM

(INCHES)

Item Symbol SMA (DO-214AC)

Carrier Width A 2.90 ± 0.10

(0.114 ± 0.004)

Carrier Length B 5.59 ± 0.10

(0.220 ± 0.004)

Carrier Depth C 2.36 ± 0.10

(0.093 ± 0.004)

Sprocket Hole d 1.55 ± 0.05

(0.061 ± 0.002)

Reel Outside Diameter D 330

(12.992)

Reel Inner Diameter D1 50.0

(1.969) MIN.

Feed Hole Diameter D2 13.0 ± 0.20

(0.512 ± 0.008)

Sprocket Hole Position E 1.75 ± 0.10

(0.069 ± 0.004)

Punch Hole Position F 5.50 ± 0.05

(0.217 ± 0.002)

Punch Hole Pitch P 4.00 ± 0.10

(0.157 ± 0.004)

Sprocket Hole Pitch P0 4.00 ± 0.10

(0.157 ± 0.004)

Embossment Center P1 2.00 ± 0.05

(0.079 ± 0.002)

Overall Tape Thickness T 0.30 ± 0.10

(0.012 ± 0.004)

Tape Width W 12.00 ± 0.20

(0.472 ± 0.008)

Reel Width W118.4

(0.724) MAX.

Quantity per Reel -- 5,000

REV. 08/12

Speciﬁ cations are subject to change without notice.

Customers should verify actual device performance in their speciﬁ c applications.

SMAJ Transient Voltage Suppressor Diode Series