Series 107-55 Aluminum Extractor
nVent.com/SCHROFF 1-800-854-7086
nVent may modify standard parts without prior notice to or approval from customers. These modications may change product appearance, but will not have a detrimental effect on form, t or function. ©2018 nVent. All nVent marks and logos are
owned or licensed by nVent Services GmbH or its aliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specications without notice.
SERIES 107-55 ALUMINUM INSERTER / EXTRACTOR
MATERIALS AND FINISH
EXTRACTOR
Materials:
Aluminum alloy 6061-T6
Finish:
Black anodize per Mil-A-8625,
Class 2, Type II or Clear Chemical
Film per Mil-DTL-5541, Class 3,
Type II for a conductive nish.
ASSEMBLY PIN
Materials:
Stainless steel
Finish:
Passivated
APPLICATION DATA
Two inserter or inserter-extractors are
recommended per printed circuit board
taller than 127 mm (5 in) height.
ASSEMBLY PIN
Option to be pre-started for:
• Faster and easier
installation of the extractor
to the PCB
• Eliminates the need for
special tools or equipment
and set up time.
• Eliminates loss of loose
assembly pins
If the “P” option is not selected,
the extractors and the pins will
be packaged seperately.
P C
5
Series 107- extractor e c
for PCB thickness of 2.4 (.094)
Units: mm (in)
.xx ± .25, .x ±.5
(.xxx ± .010, .xx ± .02)
Assembly Pin
5
12.7
(.50)
88.9
(3.50)
12.06
(.475)
7.37
(.290)
2.77
(.109)
6.35
(.250)
1.5 (.06)Ref.
7.24 ± .38
(.285 ± .015)
18.5 (.73)
Card Guide
Surface 9.1
(.36)
1.5 (.06)max.
6.35
(.250)
6.1 (.24)min.
