16SP0165 - Aerospace Contacts, L.L.C.

SMBG5.0A thru SMBG188CA

www.vishay.com Vishay General Semiconductor

Revision: 16-Jan-18 1Document Number: 88456

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Surface Mount TRANSZORB®

Transient Voltage Suppressors

DEVICES FOR BI-DIRECTION APPLICATIONS

For bi-directional devices use CA suffix (e.g. SMBG10CA).

Electrical characteristics apply in both directions.

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 600 W peak pulse power capability with a

10/1000 μs waveform, repetitive rate

(duty cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 260 °C

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

Use in sensitive electronics protection against voltage

transients induced by inductive load switching and lighting

on ICs, MOSFET, signal lines of sensor units for consumer,

computer, industrial, automotive, and telecommunication.

MECHANICAL DATA

Case: SMBG (DO-215AA) 

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, industrial grade

Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 2 whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: for uni-directional types the band denotes cathode

end, no marking on bi-directional types

Notes

(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2

(2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal

PRIMARY CHARACTERISTICS

VWM 5.0 V to 188 V

VBR (uni-directional) 6.4 V to 231 V

VBR (bi-directional) 6.4 V to 231 V

PPPM 600 W

IFSM (uni-directional only) 100 A

TJ max. 150 °C

Polarity Uni-directional, bi-directional

Package SMBG (DO-215AA)

SMBG (DO-215AA)

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) PPPM 600 W

Peak pulse current with a 10/1000 μs waveform (1) IPPM See next table A

Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) IFSM 100 A

Operating junction and storage temperature range TJ, TSTG -55 to +150 °C

SMBG5.0A thru SMBG188CA

www.vishay.com Vishay General Semiconductor

Revision: 16-Jan-18 2Document Number: 88456

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Pulse test: tp  50 ms

(2) Surge current waveform per fig. 3 and derate per fig. 2

(3) For bi-directional types having VWM of 10 V and less, the ID limit is doubled

(4) All terms and symbols are consistent with ANSI/IEEE C62.35

(5) For the bi-directional SMBG5.0CA, the maximum VBR is 7.25 V

(6) VF = 3.5 V at IF = 50 A (uni-directional only)

(+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number

E136766 for both uni-directional and bi-directional devices

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

DEVICE TYPE

MODIFIED 

GULL WING

DEVICE MARKING

CODE

BREAKDOWN

VOLTAGE

VBR AT IT (1)

(V)

TEST

CURRENT

(mA)

STAND-OFF

VOLTAGE

VWM

(V)

MAXIMUM

REVERSE

LEAKAGE

AT VWM

ID (μA) (3)

MAXIMUM

PEAK PULSE

SURGE

CURRENT

IPPM (A) (2)

MAXIMUM

CLAMPING

VOLTAGE AT

IPPM

VC (V)

UNI BI MIN. MAX.

(+)SMBG5.0A (5) KE KE 6.40 7.07 10 5.0 800 65.2 9.2

(+)SMBG6.0A KG KG 6.67 7.37 10 6.0 800 58.3 10.3

(+)SMBG6.5A KK AK 7.22 7.98 10 6.5 500 53.6 11.2

(+)SMBG7.0A KM KM 7.78 8.60 10 7.0 200 50.0 12.0

(+)SMBG7.5A KP AP 8.33 9.21 1.0 7.5 100 46.5 12.9

(+)SMBG8.0A KR AR 8.89 9.83 1.0 8.0 50 44.1 13.6

(+)SMBG8.5A KT AT 9.44 10.4 1.0 8.5 20 41.7 14.4

(+)SMBG9.0A KV AV 10.0 11.1 1.0 9.0 10 39.0 15.4

(+)SMBG10A KX AX 11.1 12.3 1.0 10 5.0 35.3 17.0

(+)SMBG11A KZ KZ 12.2 13.5 1.0 11 5.0 33.0 18.2

(+)SMBG12A LE BE 13.3 14.7 1.0 12 5.0 30.2 19.9

(+)SMBG13A LG LG 14.4 15.9 1.0 13 1.0 27.9 21.5

(+)SMBG14A LK BK 15.6 17.2 1.0 14 1.0 25.9 23.2

(+)SMBG15A LM BM 16.7 18.5 1.0 15 1.0 24.6 24.4

(+)SMBG16A LP LM 17.8 19.7 1.0 16 1.0 23.1 26.0

(+)SMBG17A LR LR 18.9 20.9 1.0 17 1.0 21.7 27.6

(+)SMBG18A LT BT 20.0 22.1 1.0 18 1.0 20.5 29.2

(+)SMBG20A LV LV 22.2 24.5 1.0 20 1.0 18.5 32.4

(+)SMBG22A LX BX 24.4 26.9 1.0 22 1.0 16.9 35.5

(+)SMBG24A LZ BZ 26.7 29.5 1.0 24 1.0 15.4 38.9

(+)SMBG26A ME CE 28.9 31.9 1.0 26 1.0 14.3 42.1

(+)SMBG28A MG MG 31.1 34.4 1.0 28 1.0 13.2 45.4

(+)SMBG30A MK CK 33.3 36.8 1.0 30 1.0 12.4 48.4

(+)SMBG33A MM CM 36.7 40.6 1.0 33 1.0 11.3 53.3

(+)SMBG36A MP CP 40.0 44.2 1.0 36 1.0 10.3 58.1

(+)SMBG40A MR CR 44.4 49.1 1.0 40 1.0 9.3 64.5

(+)SMBG43A MT CT 47.8 52.8 1.0 43 1.0 8.6 69.4

(+)SMBG45A MV MV 50.0 55.3 1.0 45 1.0 8.3 72.7

(+)SMBG48A MX MX 53.3 58.9 1.0 48 1.0 7.8 77.4

(+)SMBG51A MZ MZ 56.7 62.7 1.0 51 1.0 7.3 82.4

(+)SMBG54A NE NE 60.0 66.3 1.0 54 1.0 6.9 87.1

(+)SMBG58A NG NG 64.4 71.2 1.0 58 1.0 6.4 93.6

(+)SMBG60A NK NK 66.7 73.7 1.0 60 1.0 6.2 96.8

(+)SMBG64A NM NM 71.1 78.6 1.0 64 1.0 5.8 103

(+)SMBG70A NP NP 77.8 86.0 1.0 70 1.0 5.3 113

(+)SMBG75A NR NR 83.3 92.1 1.0 75 1.0 5.0 121

(+)SMBG78A NT NT 86.7 95.8 1.0 78 1.0 4.8 126

(+)SMBG85A NV NV 94.4 104 1.0 85 1.0 4.4 137

(+)SMBG90A NX NX 100 111 1.0 90 1.0 4.1 146

(+)SMBG100A NZ NZ 111 123 1.0 100 1.0 3.7 162

(+)SMBG110A PE PE 122 135 1.0 110 1.0 3.4 177

(+)SMBG120A PG PG 133 147 1.0 120 1.0 3.1 193

(+)SMBG130A PK PK 144 159 1.0 130 1.0 2.9 209

(+)SMBG150A PM PM 167 185 1.0 150 1.0 2.5 243

(+)SMBG160A PP PP 178 197 1.0 160 1.0 2.3 259

(+)SMBG170A PR PR 189 209 1.0 170 1.0 2.2 275

SMBG188A PS PS 209 231 1.0 188 1.0 2.0 328

SMBG5.0A thru SMBG188CA

www.vishay.com Vishay General Semiconductor

Revision: 16-Jan-18 3Document Number: 88456

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Mounted on minimum recommended pad layout

Note

(1) AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Peak Pulse Power Rating Curve

Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature

Fig. 3 - Pulse Waveform

Fig. 4 - Typical Junction Capacitance

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL VALUE UNIT

Typical thermal resistance, junction to ambient (1) RJA 100 °C/ W

Typical thermal resistance, junction to lead RJL 20

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

SMBG5.0A-E3/52 0.096 52 750 7" diameter plastic tape and reel

SMBG5.0A-E3/5B 0.096 5B 3200 13" diameter plastic tape and reel

SMBG5.0AHE3/52 (1) 0.096 52 750 7" diameter plastic tape and reel

SMBG5.0AHE3/5B (1) 0.096 5B 3200 13" diameter plastic tape and reel

0.1

100

0.2 x 0.2" (5.0 x 5.0 mm)

Copper Pad Areas

PPM

- Peak Pulse Power (kW)

td - Pulse Width (s)

0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms

0 255075100

100

125 150 175 200

TJ - Initial Temperature (°C)

Peak Pulse Power (P

) or Current (I

)

Derating in Percentage, %

100

150

01.0 2.0 3.0 4.0

IPPM - Peak Pulse Current, % IRSM

t - Time (ms)

= 10 µs

Peak Value

PPM

Half Value -

PPM

10/1000 µs Waveform

as defined by R.E.A.

= 25 °C

Pulse Width (t

)

is defined as the Point

where the Peak Current

decays to 50 % of I

PPM

100

1000

6000

101 100 200

Uni-Directional

Bi-Directional

= 25 °C

f = 1.0 MHz

sig

= 50 mVp-p

Measured at

Zero Bias

, Measured at

Stand-Off

Voltage V

- Junction Capacitance (pF)

VWM - Reverse Stand-Off Voltage (V)

SMBG5.0A thru SMBG188CA

www.vishay.com Vishay General Semiconductor

Revision: 16-Jan-18 4Document Number: 88456

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 5 - Typical Transient Thermal Impedance Fig. 6 - Maximum Non-Repetitive Peak Forward Surge Current

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0.1

1.0

100

0.001 0.01 0.1 10 1 100 1000

- Pulse Duration (s)

Transient Thermal Impedance (°C/W)

200

100

1100

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

8.3 ms Single Half Sine-Wave

Uni-Directional Only

0.180 (4.57)

0.160 (4.06)

0.016 (0.41)

0.006 (0.15)

0.020

(0.51) MAX.

0.058 (1.47)

0.038 (0.97)

0.255 (6.48)

0.235 (5.97)

0.030 (0.76)

0.015 (0.38)

0.155 (3.94)

0.130 (3.30)

0.083 (2.10)

0 .077 (1.96)

0.095 (2.41)

0.075 (1.90)

0.165 (4.19)

0.085 (2.16)

0.060 (1.27)

SMBG (DO-215AA)

Mounting Pad Layout

Cathode Band

0.008 (0.20)

0.002 (0.05)

Seating Plane

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.