VOLTAGE RANGE 50 to 1000 Volts CURRENT 15 Amperes
FEATURES
* Superior thermal desing
* 300 amperes surge rating
* 1/4// universal faston terminal
* Hole thru for # 10 screw
* UL listed the recognized component directory, file #E94233
* Epoxy: Device has UL flammability classification 94V-O
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
MP1505
THRU
MP1510
MAXIMUM RATINGS
(At TA = 25oC unless otherwise noted)
SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
MP-15
MP-15W
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum DC Blocking Voltage
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
SYMBOL
V
RRM
V
DC
I
O
I
FSM
V
RMS
Volts
Volts
Amps15.0
300
UNITS
Maximum Average Forward Output Current at Tc = 55
o
C
50 200 400100 600 800 1000
35 140 28070 420 560 700
50 200 400100 600 800 1000 Volts
Amps
MP1505 MP152 MP154MP151 MP156 MP158 MP1510
MECHANICAL DATA
ELECTRICAL CHARACTERISTICS
(At TA = 25oC unless otherwise noted)
NOTE: 1. Suffix ”W” for wire type 2008-10
REV: O
Operating and Storage Temperature Range T
J,
T
STG
-55 to + 150
0
C
DC Blocking Voltage per element
CHARACTERISTICS
V
F
SYMBOL
I
R
UNITS
1.1
0.5 mAmps
uAmps
Maximum Reverse Current at Rated
Maximum Forward Voltage Drop per element at 7.5A DC Volts
@T
A
= 25
o
C
@T
C
= 100
o
C
5.0
MP1505 MP152 MP154MP151 MP156 MP158 MP1510
Typical Thermal Resistance (from junction to case) 2
0
C/W
Rq
JC
Typical Thermal Resistance (from junction to ambient Rq
JA
2. ”Fully ROHS compliant”,”100% Sn plating(Pb-free).
19
RMS isolation voltage from case to lead Volts2500
V
ISO
RATING AND CHARACTERISTIC CURVES
(
MP1505 THRU MP1510 )
PERCENT OF RATED PEAK REVERSE VOLTAGE, ( %
)
INSTANTANEOUS REVERSE CURRENT, (uA)
FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
10
1.0
.1
.01
0 20 40 60 80 100 120 140
TJ = 25
FIG. 1 - MAXIMUM NON-REPETITIVE FORWARD
PEAK FORWARD SURGE CURRENT, (A)
NUMBER OF CYCLES AT 60Hz
SURGE CURRENT
500
400
300
200
100
0
1 2 4 6 8 10 20 40 60 80 100
8.3ms Single Half Sine-Wave
(JEDEC Method)
FIG. 3- TYPICAL INSTANTANEOUS FORWARD
INSTANTANEOUS FORWARD CURRENT, (A)
INSTANTANEOUS FORWARD VOLTAGE, (V)
100
10
1.0
.1
.01
.8.6 .7 .9 1.0 1.1 1.2 1.3
CHARACTERISTICS
TJ
= 25
Pulse Width = 300us
1% Duty Cycle
FIG. 2 - TYPICAL FORWARD CURRENT
AVERAGE FORWARD CURRENT, (A)
DERATING CURVE
CASE TEMPERATURE, ( )
25
20
15
10
5
0
0 50 100 150 175
MP-15 MP-15W
.32 x .252 (0.81 x 6.35)
.583 (14.8)
.634 (16.1)
.425 (10.8)
.480 (12.2)
.673 (17.1)
1.102 (28)
1.142 (29)
.543 (13.8)
1.102 (28)
1.142 (29)
.673 (17.1)
.732 (18.6)
.693 (17.6)
.634 (16.1)
Max. .311 (7.9)
Min f.200 (5.08)
Hole for # 10 screw Hole for # 10 screw
Min .200 (5.08)
MAX. .311 (7.9)
MIN. .787 (20.0)
1.142 (29)
1.102 (28)
.732 (18.6)
.469 (11.9)
.429 (10.9)
.142 (29.0)
.102 (28.0)
.693 (17.6)
.732 (18.6)
.693 (17.6)
.043 (1.1)
.039 (1.0)
60 Hz RESISTIVE OR
INDUCTIVE LOAD
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
