©2013 Fairchild Semiconductor Corporation 1www.fairchildsemi.com
RURG3060CC_F085 Rev. C1
RURG3060CC_F085 30A, 600V Ultrafast Rectifier
October 2013
RURG3060CC_F085
30A, 600V Ultrafast Rectifier
Features
• High Speed Switching ( trr=60ns(Typ.) @ IF=30A )
• Low Forward Voltage( VF=1.5V(Max.) @ IF=30A )
• Avalanche Energy Rated
• AEC-Q101 Qualified
Applications
• Automotive DCDC converter
• Automotive On Board Charger
• Switching Power Supply
• Power Switching Circuits
30A, 600V Ultrafast Rectifier
The RURG3060_F085 is an dual ultrafast diode with soft
recovery characteristics (trr<80ns). It has low forward
voltage drop and is silicon nitride passivated ion-
implanted epitaxial planar construction.
This device is intended for use as a freewheeling/clamp-
ing diode and rectifier in a variety of switching power
supplies and other power switching applications. Its low
stored charge and ultrafast recovery with soft recovery
characteristic minimizes ringing and electrical noise in
many power switching circuits, thus reducing power loss
in the switching transistors.
Pin Assignments
Absolute Maximum Ratings TC = 25°C unless otherwise noted
Thermal Characteristics TC = 25°C unless otherwise noted
Package Marking and Ordering Information
Symbol Parameter Ratings Units
VRRM Peak Repetitive Reverse Voltage 600 V
VRWM Working Peak Reverse Voltage 600 V
VRDC Blocking Voltage 600 V
IF(AV) Average Rectified Forward Current @ TC = 25°C30A
IFSM Non-repetitive Peak Surge Current (Halfwave 1 Phase 50Hz) 90 A
EAVL Avalanche Energy (1A, 40mH) 20 mJ
TJ, TSTG Operating Junction and Storage Temperature - 55 to +175 °C
Symbol Parameter Max Units
RθJC Maximum Thermal Resistance, Junction to Case (Single Anode) 1 °C/W
RθJA Maximum Thermal Resistance, Junction to Ambient 45 °C/W
Device Marking Device Package Tube Quantity
RURG3060CC RURG3060CC_F085 TO-247 - 30
2www.fairchildsemi.com
RURG3060CC_F085 Rev. C1
RURG3060CC_F085 30A, 600V Ultrafast Rectifier
Electrical Characteristics TC = 25°C unless otherwise noted, for Single anode
Notes:
1. Test Pulse Width = 300us, Duty Cycle = 3%
2 Guaranteed by design.
Test Circuit and Waveforms
Symbol Parameter Conditions Min. Typ. Max Units
IRInstantaneous Reverse Current VR = 600V TC = 25 °C - - 250 uA
TC = 175 °C- - 1 mA
VFM1Instantaneous Forward Voltage IF = 30A TC = 25 °C
TC = 175 °C
-
-
1.26
1.06
1.5
1.3
V
V
trr2Reverse Recovery Time IF =1A, di/dt = 100A/μs,
VCC= 390V
TC = 25 °C - 35 55 ns
IF =30A, di/dt = 100A/μs,
VCC= 390V
TC = 25 °C
TC = 175 °C
-
-
60
231
80
-
ns
ns
ta
tb
Qrr
Reverse Recovery Time
Reverse Recovery Charge
IF =30A, di/dt = 100A/μs,
VCC= 390V
TC = 25 °C-
-
-
31
29
92
-
-
-
ns
ns
nC
EAVL Avalanche Energy IAV=1.0A,L = 40mH 20 - - mJ
3www.fairchildsemi.com
RURG3060CC_F085 Rev. C1
RURG3060CC_F085 30A, 600V Ultrafast Rectifier
Typical Performance Characteristics Single Anode
Figure 1. Typical Forward Voltage Drop
vs. Forward Current
Figure 2. Typical Reverse Current vs.
Reverse Voltage
Figure 3.Typical Junction Capacitance Figure 4. Typical Reverse Recovery Time
vs. di/dt
Figure 5. Typical Reverse Recovery
Current vs. di/dt
Figure 6. Forward Current Derating Curve
0.1 0.5 1.0 1.5 2.0
0.1
1
10
100
TC = 125oC
TC = 175oC
Forward Current, IF [A]
Forward Voltage, VF
[V]
TC = 25oC
400
0 100 200 300 400 500 60 0
1E-4
1E-3
0.01
0.1
1
10
100
1000
TC = 175oC
TC = 25oC
TC = 125oC
Reverse Current , IR [μA]
Reverse V oltage, VR [V]
0.1 1 10 100
100
200
300
400
Capacitances , C j [pF]
Typical Capacitance
at 10V = 103pF
Re verse Volta ge, VR [V]
100 200 300 400 500
0
50
100
150
200
250
TC = 175oC
IF = 30A
TC = 25oC
TC = 125oC
Reverse Recovery Time, trr [ns]
di/dt [A/μs]
100 200 3 00 400 500
0
5
10
15
20
25
30
35
TC = 125 oC
IF = 30A
TC
= 25oC
TC = 175oC
Reverse Recovery Current, Irr
[A]
di/dt [A/μs]
25 50 75 100 1 25 150 1 75
0
10
20
30
40
Average Forward Current, IF(AV) [A]
Ca se temperature, TC [ oC]
4www.fairchildsemi.com
RURG3060CC_F085 Rev. C1
RURG3060CC_F085 30A, 600V Ultrafast Rectifier
Typical Performance Characteristics (Continued)
Figure 7. Reverse Recovery Charge
Figure 8. Transient Thermal Response Curve
100 200 300 400 500
0
500
1000
1500
2000
2500
TC = 175oC
IF = 30A
TC = 25oC
TC
= 125oC
Reverse Recovery Charge, Qrr
[nC]
di/dt [A/μs]
10-5 10-4 10-3 10-2 10-1 10010 1102
0.001
0.1
1
2
* Notes :
1. ZthJC(t) = 1.0 OC/W Typ.
2. Duty Factor , D =t1/t2
3. TJM - TC = PDM * ZthJC(t)
single pulse
D=0.5
0.02
0. 2
0.05
0.1
0.01
ZthJ C(t), Thermal Response
t1, Square Wave Pulse Duration [sec]
t
1
P
DM
t
2
5www.fairchildsemi.com
RURG3060CC_F085 Rev. C1
RURG3060CC_F085 30A, 600V Ultrafast Rectifier
Mechanical Dimensions
Dimensions in Millimeters
TO-247-3L
www.fairchildsemi.com
6
RURG3060CC_F085 30A, 600V Ultrafast Rectifier
RURG3060CC_F085 Rev. C1
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY
PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY
THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used here in:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to cause
the failure of the life support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
AccuPower™
AX-CAP®*
BitSiC™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficentMax™
ESBC™
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FETBench™
FPS™
F-PFS™
FRFET®
Global Power ResourceSM
GreenBridge™
Green FPS™
Green FPS™ e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
Marking Small Speakers Sound Louder
and Better™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MicroPak2™
MillerDrive™
MotionMax™
mWSaver®
OptoHiT™
OPTOLOGIC®
OPTOPLANAR®
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
Saving our world, 1mW/W/kW at a time™
SignalWise™
SmartMax™
SMART START™
Solutions for Your Success™
SPM®
STEALTH™
SuperFET®
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS®
SyncFET™
Sync-Lock™
®*
TinyBoost®
TinyBuck®
TinyCalc™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TranSiC™
TriFault Detect™
TRUECURRENT®*
μSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
VoltagePlus™
XS™
®
™
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications
may change in any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later
date. Fairchild Semiconductor reserves the right to make changes at any time without
notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to
make changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild
Semiconductor. The datasheet is for reference information only.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website,
www.Fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed
application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild
Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of
up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and
warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is
committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.
Rev. I66
tm
®
