Power Resistor Type RR Series Type RR Series Characteristics Electrical RR01 RR02 0.22-1M 10R - 1M0 0.33-1M 10R - 1M0 0.33-1M 10R - 1M0 Tolerance and Series: 5%, E24 Maximum Dissipation: at Tamb. = 70C Thermal Resistance: Limiting Voltage (DC or RMS): 1%, E24/E96 5%, E24 5%, E24 1%, E24/E96 2W 3W 120k/W 80k/W 65k/W 350V 500V 750V Pn x R Temperature Coefficient: 300ppm/C Basic Specification: IEC 60115-1 and 60115-4 Climatic Category (IEC 60068): 55/155/56 Stability R/R Max. After: For tolerance 5% For tolerance 1% Load 5.0% +0.1 1.0% +0.1 Climatic Tests 3.0% +0.1 1.0% +0.1 Resistance to Soldering Heat 1.0% +0.05 0.5% +0.05 (1) Maximum rated voltage is the limiting voltage Dimensions L B Key Features d D Metal Film Technology Non-Flammable High Power in Small Package High Stability, Reliability and Uniformity Characteristics 1%, E24/E96 1W Rated Voltage (1): The RR Series is manufactured by depositing a homogeneous film of metal alloy onto a highgrade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper are welded to the endcaps. The resistors are coated with a red, non-flammable lacquer, which provides electrical, mechanical and climatic protection. The coating is resistant to all cleaning solvents in accordance with MIL-STD-202, method 215 and IEC 60068-2-45. RR03 Resistance Range: A Good Performance for Pulse Applications Defined Interruption Behaviour (Fusing Time) Various Forming Styles A 1 B L 1 oD 0.5 od 0.1 l 3 RR01 52 5 0.5 6.8 2.6 0.65 30 RR02 52 5 0.5 9.0 3.5 0.8 30 RR03 63 10 1 15.0 5.0 0.8 30 Mounting The resistors are suitable for processing on automatic insertion equipment, cutting and bending machines. Derating Curve 100 Pmax (%) 80 60 40 20 0 -55 0 70 100 155 235 Tamb (C) Maximum dissipation (Pmax) in percentage of rated power as a function of ambient temperature (Tamb) Literature No. 3-1773449-2 Issued: 08-08 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com Power Resistor Type RR Series Fusing Characteristics Fusing Time (S) 100 10 1 0.1 12 16 20 24 28 32 36 40 Multiple of the Power Rating Pulse Characteristics 1W 10-5 Po T Pmax (W) 10-4 10s Condition Test: Resistance change 5% with pulse 1000 cycles as like the figure (reference only). One Pulse 10-3 1. Added power and added voltage are within the lower teritory of this graph. 10-2 2. Added in normal temperature and humidity. 10 10-6 10-5 10-4 10-3 10-2 10-1 1 Ti(S) Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti) 2W 10-5 Po Pmax (W) 10 -4 T 10s One Pulse Condition Test: Resistance change 5% with pulse 1000 cycles as like the figure (reference only). 10-3 1. Added power and added voltage are within the lower teritory of this graph. 10-2 2. Added in normal temperature and humidity. 10 10-6 10-5 10-4 10-3 10-2 10-1 1 Ti(S) Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti) 3W 10-5 Po T 10-4 10s Pmax (W) One Pulse Condition Test: Resistance change 5% with pulse 1000 cycles as like the figure (reference only). 10-3 1. Added power and added voltage are within the lower teritory of this graph. 10-2 2. Added in normal temperature and humidity. 10 10-6 10-5 10-4 10-3 10-2 10-1 1 Ti(S) Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti) Literature No. 3-1773449-2 Issued: 08-08 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com Power Resistor Type RR Series Marking The nominal resistance and tolerance are marked on the resistor using four or five coloured bands in accordance with IEC publication 60062 "Colour code for fixed resistors". Standard values of nominal resistance are taken from the E24/E96 series for resistors with a tolerance of 5% or 1%. The values of the E24/E96 series are in accordance with IEC publication 60063. Packaging Ammo Pack Boxed M N P Quantity RR01 75 100 255 5000 RR02 75 55 255 1000 RR03 100 110 265 1000 Packaging - Tape and Reeled Taping M N P q V Quantity pcs. RR01 52 1.0 80 295 295 310 75 5000 RR02 52 1.0 80 295 295 310 75 2500 RR03 63 1.0 80 295 295 310 75 1000 How to Order RR 01 J Common Part Power Rating Tolerance J - 5% 02 - 2 Watts F - 1% 03 - 3 Watts Literature No. 3-1773449-2 Issued: 08-08 Dimensions are shown for reference purposes only. Dimensions are in millimetres unless otherwise specified. TR Value Packaging 100 ohm (100 ohms) 100R 01 - 1 Watt RR - Power Resistor 1K0 1K0 (1000 ohms) 1K0 100 K ohm (100,000 ohms) 100K Specifications subject to change. TR - Reeled TB - Ammo Pack tycoelectronics.com passives.tycoelectronics.com