T-1 (3mm) SOLID STATE LAMP W934SURC/E HYPER RED Features Description ! LOW The Hyper Red source color devices are made with DH POWER CONSUMPTION. ! GENERAL PURPOSE LEADS. ! RELIABLE AND RUGGED. ! LONG InGaAlP on GaAs substrate Light Emitting Diode. LIFE - SOLID STATE RELIABILITY. ! AVAILABLE ON TAPE AND REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1986 APPROVED: J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:APR/12/2003 DRAWN:D.L.HUANG PAGE: 1 OF 3 Selection Guide P ar t N o . Dic e W934SURC/E Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED (InGaAlP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2 1 / 2 900 1300 50 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er D ev i c e peak Peak Wavelength Hyper Red D Dominate Wavelength 1/2 Ty p . Max . Un its Tes t Co n d it io n s 640 nm I F=20mA Hyper Red 630 nm I F=20mA Spectral Line Half-width Hyper Red 25 nm I F=20mA C Capacitance Hyper Red 45 pF V F =0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V I F=20mA IR Reverse Current Hyper Red 10 uA V R = 5V Absolute Maximum Ratings at TA=25C P ar am et er H y p er R ed Un its Power dissipation 150 mW DC Forward Current 30 mA Peak Forward Current [1] 200 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C 260C For 5 Seconds Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD1986 APPROVED: J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:APR/12/2003 DRAWN:D.L.HUANG PAGE: 2 OF 3 Hyper Red W934SURC/E SPEC NO: DSAD1986 APPROVED: J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:APR/12/2003 DRAWN:D.L.HUANG PAGE: 3 OF 3