NI35U-CK40-AP6X2-H1141 - Turck

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004

Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Inductive sensor

extended switching distance

Ni35U-CK40-AP6X2-H1141

●rectangular, height 40mm

●turnable sensor head (5 positions)

●plastic, PBT-GF30-V0

●mounting with included plastic fi-

xing clampp BS4-CK40 only

●factor 1 for all metals

●extended switching distance

●degree of protection IP68

●magnetic field immune

●extended temperature range

●high switching frequency

●predamping protection through

self-compensation

●3-wire DC, 10...30 VDC

●normally open pnp output

●connector, M12 x 1

Wiring diagram

Function principles

Inductive proximity switches are designed

for wear-free non-contact detection of me-

tal objects. Due to a ferrite-less 3-coil sy-

stem, Uprox factor 1 sensor have distinct

advantages. The detect all metals at the

same switching distance, are magnetic

field immune and feature large switching di-

stances.

1 BN

3 BU

4 BK



pnp

4 BK

3 BU 1 BN

Type Ni35U-CK40-AP6X2-H1141

Ident-No. 1625800

Rated operating distance Sn 35 mm

Mounting mode non-flush, partial flush mountable

Hysteresis (switching distance) 3... 15 %

Min. repeat accuracy ≤ 2 %

Temperature drift ≤ ± 10 %

≤ ± 15 %, ≤ -25 °C v ≥ +70 °C

Operating temperature -30 ...+ 85 °C

Rated operational voltage (DC) UB10... 30 VDC

Max. ripple ≤ 10 % Upp

Rated operational current (DC) Ie≤ 200 mA

No-load current I0≤ 15 mA

Max. OFF-state current ≤ 0,1 mA

Max. switching frequency ≤ 0,25 kHz

Rated insulation voltage ≤ 0,5 kV

Output function 3-wire, normally open, PNP

Short-circuit protection yes, cyclic

Max. voltage drop at Ie≤ 1,8 V

Wire breakage / reverse polarity protection yes / complete

Protection class ÷

Housing style rectangular; CK40

Dimensions 65 x 40 x 40 mm

Housing material plastic, PBT-GF30-V0

Active face plastic, PA6-GF30

Wiring connector, M12 x 1

Vibration resistance 55 Hz (1 mm)

Shock resistance 30 x g (11 ms)

Degree of protection IP68

Supply voltage indication LED green

Switching status indication LED yellow

Included with sensor BS4-CK40

M12 x 1

ø 5,3

5,3 x 7,3

LED

Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264

Inductive sensor

extended switching distance

Ni35U-CK40-AP6X2-H1141

Mounting instructions minimum gap

Gap D 240 mm

Gap W 105 mm

Gap T 140 mm

Gap S 20 mm

Gap G 210 mm

Gap N 30 mm

Width of active face B 40 mm

4-side flush mounting possible

1-side flush mounting: Sr = 28 mm

2-side flush mounting: Sr = 24 mm

3-side flush mounting: Sr = 19 mm

4-side flush mounting: Sr = 15 mm

back-mounting without having to reduce

the switching distance

protruded mounting with switching di-

stance reduction possible