BriLux 1W Light Source
BTP-53XXCR-XX-XX
Package Dimension
Features
Highest Lumen Per Watt
Long Operational Life
More Energy Efficient
IC Compatible
Low DC Voltage
Superior ESD Protection
Smallest Footprint
Applications
Accent Lighting
Automotive Exterior/Interior Light
High Power Back Light
Reading Light
Marine/Miner’s Lighting
Portable Lighting
Optical Characteristics at Tj=25ºC
LED CHIP Wavelength/CCT
Range (nm/K)
Drive
Voltage
Luminous
Flux
@350mA(lm)
PART NUMBER
MATERIAL
Lens
Color Min/Max Typ. Typ.
VIEW
ANGLE
2θ1/2
(deg)
BTP-53NRCR-XX-15 AlInGaP Water Clear 620~635 2.85V 15 lm 60
BTP-53AMCR-XX-15 AlInGaP Water Clear 600~620 2.85V 15 lm 60
BTP-53YECR-XX-15 AlInGaP Water Clear 585~595 2.85V 15 lm 60
BTP-53DBCR-XX-05 AlInGaN Water Clear 450~460 3.50V 5 lm 60
BTP-53BLCR-XX-06 AlInGaN Water Clear 460~475 3.50V 6 lm 60
BTP-53GBCR-XX-08 AlInGaN Water Clear 475~485 3.50V 8 lm 60
BTP-53BGCR-XX-15 AlInGaN Water Clear 495~510 3.50V 15 lm 60
BTP-53GMCR-XX-20 AlInGaN Water Clear 510~520 3.50V 20 lm 60
BTP-53PGCR-XX-25 AlInGaN Water Clear 520~525 3.50V 25 lm 60
BTP-53WHCR-XX-20 AlInGaN Water Clear 5000K~8000K 3.60V 20 lm 60
5.30mm
4.00mm
1.50mm 2.4mm
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-53XXCR-XX-XX
Absolute Maximum Ratings at Tj=25ºC
Parameter White/Green/Cyan/Blue Red/Amber/Yellow
DC Forward Current (mA)[1] 350 350
Peak Pulsed Forward Current (mA) 500 500
Average Forward Current (mA) 350 350
Reverse Voltage (V) 5 5
Reverse Current (uA) 10 10
LED Junction Temperature (°C) 120 120
Al-PCB Temperature (°C)[3] 100 100
Storage Temperature (°C) -40 to +100 -40 to +100
Soldering Temperature (°C)[4] 260 for 5 seconds max 260 for 5 seconds max
Application Notes:
1. Proper forward current must be observed to maintain the junction temperature below maximum
rating
2. Although all products listed are class on e ESD protec tion (+/- 1KV by HBM mode), care must be
fully taken when handling products
3. Measured at back of aluminium PCB without addition al heat sin k. We recommend mounting
BriLux light source directly to heat sink with fasteners for best performa nce.
4. Measured at contact terminals.
5. Specification is subjected to change without notice.
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-53XXCR-XX-XX
Typical Electro-Optical Chara cteristics Curves at Tj=25ºC
(Red/Yellow/Blue/Green)
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-53XXCR-XX-XX
Typical Electro-Optical Chara cteristics Curves at Tj=25ºC (White)
White BriLux
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
