MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# MPS918 Features * * Simplifies Circuit Design Reduces Component Count x Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL Rating 1 Marking:MPS918 Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) x * NPN Silicon Amplifier Transistor TO-92 Maximum Ratings Symbol V CEO V CBO V EBO IC TJ TSTG Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current, Continuous Operating Junction Temperature Storage Temperature Rating 15 30 3.0 50 -55 to +150 -55 to +150 Unit V V V mA O C O C Max 350 2.8 0.85 6.8 147 357 Unit mW mW/OC W mW/OC O C/W O C/W A E B Thermal Characteristics Symbol PD PD RJ C RJA Rating Total Device Dissipation Derate above 25OC Total Device Dissipation Derate above 25 OC Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient (1) C Electrical Characteristics @ 25OC Unless Otherwise Specified Symbol Parameter Min Max Units 15 --- Vdc 30 --- Vdc 3.0 --- Vdc --- 10 nAdc D OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO ICBO Collector-Emitter Breakdown Voltage (IC=3.0mAdc, IE =0) Collector-Base Breakdown Voltage (IC=1.0uAdc, IE =0) Emitter-Base Breakdown Voltage (IE =10uAdc, IC=0) Collector Cutoff Current (VCB=15Vdc, IE =0) (2) E DC Current Gain (V CE=1.0Vdc, IC=3.0mAdc) 20 ----VCE(sat) Collector-Emitter Saturation Voltage (IC=10mAdc, IB =1.0mAdc) --0.4 Vdc VBE(sat) Base-Emitter On Voltage (IC=10mAdc, IB =1.0mAdc) --1.0 Vdc (1) RJA is measured with the device soldered into a typical printed circuit board. (2) Pulse Test: Pulse Width<300us, Duty Cycle<1.0% C G DIMENSIONS ON CHARACTERISTICS hFE B DIM A B C D E G INCHES MIN .170 .170 .550 .010 .130 .096 MAX .190 .190 .590 .020 .160 .104 MM MIN 4.33 4.30 13.97 0.36 3.30 2.44 MAX 4.83 4.83 14.97 0.56 3.96 2.64 NOTE www.mccsemi.com Revision: 6 1 of 3 2010/08/18 MCC MPS918 TM Micro Commercial Components Symbol Parameter Min Max Units 600 --- MHz ----- 3.0 1.7 pF --- 2.0 pF 20 250 --- --- 6.0 dB SMALL-SIGNAL CHARACTERISTICS Current-Gain-- Bandwidth Product (2) (IC=4.0mAdc, V CE=10Vdc, f=100MHz) Output Capacitance (V CB=0, IE =0, f=1.0MHz) Cobo (V CB=10Vdc, IE =0, f=1.0MHz) Cibp Input Capacitance (V EB =0.5Vdc, IC=0, f=1.0MHz) hfe Small-Signal Current Gain (IC=8.0mAdc, V CE=10Vdc, f=1.0KHz) NF Noise Figure (IC=1.0mAdc, V CE=6.0Vdc, RS =400OHMS, f=60MHz) * Pulse Test: Pulse Width<300us, Duty Cycle<1.0% fT www.mccsemi.com Revision: 6 2 of 3 2010/08/18 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-AP Ammo Packing;2Kpcs/AmmoBox (Part Number)-BP Bulk;1Kpcs/Bag ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the expresse written approval of Micro Commercial Components Corporation. www.mccsemi.com Revision: 6 3 of 3 2010/08/18