L1C1-3080000000000 - LUMILEDS HOLDING B.V.

ILLUMINATION

The LUXEON C Color Line is an optically advanced portfolio of Color and

White LEDs. Designed for awless color mixing, LUXEON C Color Line

has one focal length for all colors, which provides consistent radiation

patterns from secondary optics and maximizes optical eciency. With

low dome design, it keeps eective source size small while still improving

light extraction. Designed for smooth color mixing and maximum punch,

LUXEON C Color Line is the optimal LED solution for architecture,

entertainment and emergency vehicle lighting applications.

LUXEON C Color Line

Multiple colors, a single focal length

FEATURES AND BENEFITS PRIMARY APPLICATIONS

One focal length allows awless color mixing, maximum optical eciency

and removes halos Architectural & Entertainment

Low dome design eliminates trade-os between ux and source size Lamps

Hot tested—removes guesswork for designers – Color Tunable

Industry’s lowest thermal resistance means greater light output

and lower heatsink costs Specialty Lighting

Small symmetrical 2x2mm² package enables dense packing and

limits the impact of rotation during reow – Emergency Vehicle

No. E352519

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Lumen Maintenance .................................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Optical Characteristics ...............................................................................4

Electrical and Thermal Characteristics..................................................................4

Absolute Maximum Ratings .......................................................................5

Characteristic Curves .............................................................................6

Spectral Power Distribution Characteristics .............................................................6

Light Output Characteristics ..........................................................................8

Forward Current Characteristics......................................................................15

Radiation Pattern Characteristics .....................................................................18

Product Bin and Labeling Denitions ..............................................................20

Decoding Product Bin Labeling.......................................................................20

Luminous Flux Bins .................................................................................21

Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Color Bin Denitions ................................................................................22

Peak Wavelength Bins...............................................................................24

Dominant Wavelength Bins ..........................................................................24

Forward Voltage Bins ...............................................................................25

Mechanical Dimensions..........................................................................25

Reow Soldering Guidelines ......................................................................26

JEDEC Moisture Sensitivity ...........................................................................26

Solder Pad Design ..................................................................................27

Packaging Information...........................................................................27

Pocket Tape Dimensions ............................................................................27

Reel Dimensions ...................................................................................28

General Product Information

Product Test Conditions

LUXEON C Color Line LEDs are tested and binned with a DC drive current of 350mA at a junction temperature, Tj, of 85ºC.

Part Number Nomenclature

Part numbers for LUXEON C Colors follow the convention below:

L 1 C 1 – A A A 1 0 0 0 0 0 0 0 0 0

Where:

A A A – designates color (FRD=Far Red, DRD=Deep Red, RED=Red, RNG=Red-Orange, AMB=Amber,

PCA=PC Amber, MNT=Mint, LME=Lime, GRN=Green, CYN=Cyan, BLU=Blue, RYL=Royal Blue)

Therefore, the following part number is used for a LUXEON C Red LED:

L 1 C 1 – R E D 1 0 0 0 0 0 0 0 0 0

Part numbers for LUXEON C White follow the convention below:

L 1 C 1 – A A B B 0 0 0 0 0 0 0 0 0

Where:

A A – designates nominal CCT (22=2200K, 27= 2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K,

65=6500K)

B B – designates minimum CRI (70=70CRI, 80=80CRI, 90=90CRI)

Therefore, the following part number is used for a LUXEON C White 4000K 70CRI LED:

L 1 C 1 – 4 0 7 0 0 0 0 0 0 0 0 0 0

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON C is

compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the

RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted

materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1a. Product performance of LUXEON C Colors at 350mA, Tj=85ºC.

COLOR

DOMINANT OR

PEAK WAVELENGTH [1] (nm)

LUMINOUS FLUX (lm) OR

RADIOMETRIC POWER [2] (mW) PART

NUMBER

MINIMUM MAXIMUM MINIMUM TYPICAL

Far Red 720 750 190 230 L1C1-FRD1000000000

Deep Red 655 675 280 315 L1C1-DRD1000000000

Red 624 634 35 49 L1C1-RED1000000000

Red-Orange 614 624 45 60 L1C1-RNG1000000000

Amber 585 600 20 30 L1C1-AMB1000000000

PC Amber – – 80 94 L1C1-PCA1000000000

Mint – – 140 152 L1C1-MNT1000000000

Lime – – 125 135 L1C1-LME1000000000

Green 520 540 90 115 L1C1-GRN1000000000

Cyan 490 510 65 90 L1C1-CYN1000000000

Blue 465 485 25 41 L1C1-BLU1000000000

Royal Blue 440 460 480 532 L1C1-RYL1000000000

Notes for Table 1a:

1. Lumileds maintains a tolerance of ±6.5% on luminous ux measurements. PC Amber, Mint and Lime are binned by chromaticity coordinates. Far Red, Deep Red and Royal Blue are binned by

peak wavelength. All other colors are binned by dominant wavelength.

2. Far Red, Deep Red and Royal Blue are binned by radiometric power. All other colors are binned by luminous ux.

Table 1b. Product performance of LUXEON C White at 350mA, Tj=85°C.

COLOR NOMINAL

CCT

MINIMUM

CRI [1]

LUMINOUS FLUX [1] (lm)TYPICAL

LUMINOUS EFFICACY

(lm/W)

PART

NUMBER

MINIMUM TYPICAL

White

4000K 70 100 116 121 L1C1-4070000000000

5000K 70 100 117 122 L1C1-5070000000000

5700K 70 100 118 124 L1C1-5770000000000

6500K 70 100 119 124 L1C1-6570000000000

2200K 80 70 85 88 L1C1-2280000000000

2700K 80 90 94 98 L1C1-2780000000000

3000K 80 90 102 106 L1C1-3080000000000

3500K 80 90 108 112 L1C1-3580000000000

4000K 80 100 113 117 L1C1-4080000000000

2700K 90 70 82 85 L1C1-2790000000000

3000K 90 70 86 89 L1C1-3090000000000

4000K 90 75 95 99 L1C1-4090000000000

5700K 90 80 93 94 L1C1-5790000000000

Notes for Table 1b:

1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous ux measurements.

Optical Characteristics

Table 2a. Optical characteristics for LUXEON C Colors at 350mA, Tj=85°C.

COLOR PART

NUMBER

TYPICAL SPECTRAL

HALF-WIDTH [1]

(nm)

TYPICAL TEMPERATURE

COEFFICIENT OF DOMINANT

OR PEAK WAVELENGTH

(nm/°C)

TYPICAL TOTAL

INCLUDED

ANGLE [2]

TYPICAL

VIEWING

ANGLE [3]

Far Red L1C1-FRD1000000000 20 0.06 175° 162°

Deep Red L1C1-DRD1000000000 20 0.06 175° 162°

Red L1C1-RED1000000000 20 0.06 175° 162°

Red-Orange L1C1-RNG1000000000 20 0.06 175° 162°

Amber L1C1-AMB1000000000 20 0.06 175° 162°

PC Amber L1C1-PCA1000000000 80 -0.01 175° 150°

Mint L1C1-MNT1000000000 80 -0.01 175° 150°

Lime L1C1-LME1000000000 80 -0.01 175° 145°

Green L1C1-GRN1000000000 30 0.04 175° 170°

Cyan L1C1-CYN1000000000 30 0.03 175° 170°

Blue L1C1-BLU1000000000 20 0.03 175° 170°

Royal Blue L1C1-RYL1000000000 20 0.03 175° 165°

Notes for Table 2a:

1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.

2. Total angle at which 90% of total luminous ux is captured.

3. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Table 2b. Optical characteristics for LUXEON C White at 350mA, Tj=85°C.

COLOR PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2]

White L1C1-xxx0000000000 170° 150°

Notes for Table 2b:

1. Total angle at which 90% of total luminous ux is captured.

2. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3. Electrical and thermal characteristics for LUXEON C Color Line at 350mA, Tj=85ºC.

COLOR PART NUMBER

FORWARD VOLTAGE [1] (Vf)TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE [2] (mV/°C)

TYPICAL THERMAL

RESISTANCE—JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

Far Red L1C1-FRD1000000000 1.50 1.73 2.30 -1.7 2.8

Deep Red L1C1-DRD1000000000 1.50 1.95 2.30 -1.7 2.8

Red L1C1-RED1000000000 1.75 2.00 2.50 -1.6 2.8

Red-Orange L1C1-RNG1000000000 1.75 2.05 2.50 -1.6 2.8

Amber L1C1-AMB1000000000 1.75 2.05 2.50 -2.0 2.8

PC Amber L1C1-PCA1000000000 2.50 2.75 3.50 -1.7 3.0

Mint L1C1-MNT1000000000 2.50 2.75 3.50 -2.7 2.8

Lime L1C1-LME1000000000 2.50 2.75 3.50 -2.7 2.8

Green L1C1-GRN1000000000 2.50 3.05 3.50 -2.4 3.5

Cyan L1C1-CYN1000000000 2.50 3.05 3.50 -2.4 3.5

Blue L1C1-BLU1000000000 2.50 2.84 3.50 -2.6 3.5

Royal Blue L1C1-RYL1000000000 2.50 2.75 3.50 -1.7 2.8

White L1C1-xxx0000000000 2.50 2.75 3.50 -1.7 2.8

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON C Color Line.

PARAMETER FAR RED

AND DEEP RED

RED, RED-ORANGE,

AMBER AND PC AMBER

GREEN

AND CYAN

BLUE

AND ROYAL BLUE

MINT, LIME

AND WHITE

DC Forward Current [1, 2] 700mA 1050mA 1050mA 1050mA 1225mA

Peak Pulsed Forward Current [1, 3] 875mA 1300mA 1300mA 1300mA 1500mA

LED Junction Temperature [1] (DC & Pulse) 135°C 120°C 135°C 135°C 135°C

ESD Sensitivity

(ANSI/ESDA/JEDEC JS-001-2012) Class 3B

LED Storage Temperature -40°C to 135°C

Soldering Temperature JEDEC 020c 260°C

Allowable Reow Cycles 3

Reverse Voltage (Vreverse)LUXEON C LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. At 10% duty cycle with pulse width of 10ms.

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1a. Typical normalized power vs. wavelength for LUXEON C Colors at 350mA, Tj=85ºC.

Figure 1b. Typical normalized power vs. wavelength for LUXEON C White 70CRI at 350mA, Tj=85ºC.

Figure 1d. Typical normalized power vs. wavelength for LUXEON C White 90CRI at 350mA, Tj=85ºC.

Figure 1c. Typical normalized power vs. wavelength for LUXEON C White 80CRI at 350mA, Tj=85ºC.

Light Output Characteristics

Figure 2a. Typical normalized radiant power vs. junction temperature

for LUXEON C Far Red and Deep Red at 350mA.

Figure 2b. Typical normalized light output vs. junction temperature

for LUXEON C Red, Red-Orange and Amber at 350mA.

Figure 2d. Typical normalized light output vs. junction temperature for LUXEON C Mint and Lime at 350mA.

Figure 2c. Typical normalized light output vs. junction temperature for LUXEON C PC Amber at 350mA.

Figure 2e. Typical normalized light output vs. junction temperature for LUXEON C Green, Cyan and Blue at 350mA.

Figure 2f. Typical normalized light output vs. junction temperature for LUXEON C Royal Blue at 350mA.

Figure 2g. Typical normalized light output vs. junction temperature for LUXEON C White at 350mA.

Figure 3a. Typical normalized radiant power vs. forward current

for LUXEON C Far Red and Deep Red at Tj=85°C.

Figure 3c. Typical normalized light output vs. forward current for LUXEON C PC Amber at Tj=85°C.

Figure 3b. Typical normalized light output vs. forward current

for LUXEON C Red, Red-Orange and Amber at Tj=85°C.

Figure 3e. Typical normalized light output vs. forward current for LUXEON C Green, Cyan and Blue at Tj=85°C.

Figure 3d. Typical normalized light output vs. forward current for LUXEON C Mint and Lime at Tj=85°C.

Figure 3g. Typical normalized light output vs. forward current for LUXEON C White at Tj=85°C.

Figure 3f. Typical normalized light output vs. forward current for LUXEON C Royal Blue at Tj=85°C.

Forward Current Characteristics

Figure 4a. Typical forward current vs. forward voltage for LUXEON C Far Red, Deep Red, Red, Red-Orange and Amber at Tj=85ºC.

Figure 4b. Typical forward current vs. forward voltage for LUXEON C PC Amber at Tj=85ºC.

Figure 4d. Typical forward current vs. forward voltage for LUXEON C Green, Cyan and Blue at Tj=85ºC.

Figure 4c. Typical forward current vs. forward voltage for LUXEON C Mint and Lime at Tj=85ºC.

Figure 4e. Typical forward current vs. forward voltage for LUXEON C Royal Blue at Tj=85ºC.

Figure 4f. Typical forward current vs. forward voltage for LUXEON C White at Tj=85ºC.

Radiation Pattern Characteristics

Figure 5a. Typical radiation pattern for LUXEON C Far Red, Deep Red, Red, Red-Orange,

Amber, PC Amber, Green, Cyan and Blue at 350mA, Tj=85ºC.

Figure 5b. Typical radiation pattern for LUXEON C Mint, Lime, Royal Blue and White at 350mA, Tj=85ºC.

Figure 6a. Typical polar radiation pattern for LUXEON C Far Red, Deep Red, Red,

Red-Orange, Amber, PC Amber, Green, Cyan and Blue at 350mA, Tj=85ºC.

Figure 6b. Typical polar radiation pattern for LUXEON C Mint, Lime, Royal Blue and White at 350mA, Tj=85ºC.

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ux, radiometric power, color point, peak

wavelength, dominant wavelength and forward voltage.

LUXEON C Color Line LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

Where:

A – designates luminous ux bin or radiometric power bin (luminous ux bin example: A=20 to 25lm, B=25 to 30lm;

radiometric power bin example: Far Red C=280 to 320mW, Royal Blue J=520 to 560mW)

B C – designates color bin, peak wavelength bin or dominant wavelength bin (peak wavelength bin example: Deep

Red 10=655 to 665nm; dominant wavelength bin example: Red 40=624 to 634nm)

D – designates forward voltage bin (example: A=1.70 to 1.90V, B=1.90 to 2.10V)

Therefore, a LUXEON C Red LED with a lumen range of 20 to 25 lm, a dominant wavelength of 624 to 634nm and a forward

voltage range of 1.70 to 1.90V has the following CAT code:

A 4 0 A

Luminous Flux Bins

Table 5 lists the standard photometric luminous ux bins for LUXEON C Color Line emitters. Although several bins are outlined,

product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ux bin denitions for LUXEON C Color Line.

BIN LUMINOUS FLUX [1] (lm)

MINIMUM MAXIMUM

A 20 25

B 25 30

C 30 35

D 35 40

E 40 45

F 45 50

G 50 55

H 55 60

J 60 65

K 65 70

L 70 75

M 75 80

N 80 90

P 90 100

Q 100 110

R 110 120

S 120 130

T 130 140

U 140 150

V 150 170

W 170 190

Notes for Table 5:

1. Lumileds maintains a tolerance of ±6.5% on luminous ux measurements.

Radiometric Power Bins

Table 6. Radiometric power bin denitions for LUXEON C Far Red, Deep Red and Royal Blue.

COLOR PART NUMBER BIN RADIOMETRIC POWER [1] (mW)

MINIMUM MAXIMUM

Far Red L1C1-FRD1000000000

A 190 240

B 240 280

C 280 320

D 320 360

E 360 400

Deep Red L1C1-DRD1000000000

C 280 320

D 320 360

E 360 400

F 400 440

G 440 480

Royal Blue L1C1-RYL1000000000

H 480 520

J 520 560

K 560 600

L 600 640

Notes for Table 6:

1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.

Color Bin Denitions



0.41

0.42

0.43

0.44

0.55 0.56 0.57 0.58 0.59

CIE 1931 y

CIE 1931 x

PCAmber

Figure 7. Color bin structure for LUXEON C PC Amber for Table 7.

0.37

0.39

0.41

0.43

0.45

0.47

0.49

0.51

0.53

0.55

0.57

0.59

0.31 0.33 0.35 0.37 0.39 0.41 0.43

Lime Bin 10

Mint Bin 22

Mint Bin 24

Mint Bin 27

Figure 8. Color bin structure for LUXEON C Mint

and Lime for Table 7.

Table 7. Color bin denitions for LUXEON C PC Amber, Mint and Lime.

COLOR PART NUMBER BIN x y

PC Amber L1C1-PCA1000000000 20

0.5622 0.4372

0.5576 0.4326

0.5775 0.4132

0.5843 0.4151

Mint L1C1-MNT1000000000

0.3972 0.4986

0.3830 0.5077

0.3703 0.4825

0.3846 0.4749

0.3703 0.4825

0.3608 0.4639

0.3752 0.4572

0.3608 0.4639

0.3515 0.4453

0.3659 0.4396

Lime L1C1-LME1000000000 10

0.3819 0.5055

0.4191 0.5790

0.4327 0.5655

0.3972 0.4986

Notes for Table 7:

1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates measurements.

Table 8a. 3- and 5-step MacAdam ellipse color bin denitions for LUXEON C White at 350mA, Tj = 85°C.

NOMINAL CCT COLOR SPACE CENTER POINT [1]

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

2200K Single 3-step MacAdam ellipse (0.5020, 0.4156) 0.00863 0.00398 49.3°

2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.7°

3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.2°

4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.7°

2200K Single 5-step MacAdam ellipse (0.5020, 0.4156) 0.01438 0.00663 49.3°

2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.7°

3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.2°

4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.7°

5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.6°

5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.1°

6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.6°

Notes for Table 8a:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Table 8b. MacAdam ellipse color bin denitions for LUXEON C Colors.

BIN SDCM

30 Single 3-step MacAdam ellipse (90CRI)

3U Single 3-step MacAdam ellipse (80CRI)

3L Single 3-step MacAdam ellipse (80CRI)

50 Single 5-step MacAdam ellipse (70CRI and 90CRI)

5A Single 5-step MacAdam ellipse (80CRI and 90CRI)

5B Single 5-step MacAdam ellipse (80CRI and 90CRI)

5C Single 5-step MacAdam ellipse (80CRI and 90CRI)

5D Single 5-step MacAdam ellipse (80CRI and 90CRI)

Figure 10. 3- and 5-step MacAdam ellipse illustration for Table 7.

0.380

0.390

0.400

0.410

0.420

0.430

3-step MacAdam ellipse

5-step MacAdam ellipse

BBL

"Quadrant" lines

5B 5C

Note: Color bin space

illustraon for 2700K,

3000K, and 3500K. For CCTs

4000K and above the ellipse

centers are all above the

blackbody line.

Color Space Deﬁnion for above and below blackbody

Figure 9. Color bin structure for LUXEON C Color Line.

Peak Wavelength Bins

Table 9. Peak wavelength bin denitions for LUXEON C Far Red, Deep Red and Royal Blue.

COLOR PART NUMBER BIN PEAK WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

Far Red L1C1-FRD1000000000

10 720 730

20 730 740

30 740 750

Deep Red L1C1-DRD1000000000 10 655 665

20 665 675

Royal Blue L1C1-RYL1000000000

30 440 445

40 445 450

50 450 455

60 455 460

Notes for Table 9:

1. Lumileds maintains a tolerance of ±2.0nm on peak wavelength measurements.

Dominant Wavelength Bins

Table 10. Dominant wavelength bin denitions for LUXEON C Red, Red-Orange, Amber, Green, Cyan and Blue at 350mA, Tj=85ºC.

COLOR PART NUMBER BIN DOMINANT WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

Red L1C1-RED1000000000 40 624.0 634.0

Red-Orange L1C1-RNG1000000000 20 614.0 624.0

Amber L1C1-AMB1000000000

10 585.0 590.0

20 590.0 594.5

30 594.5 600.0

Green L1C1-GRN1000000000

10 520.0 525.0

20 525.0 530.0

30 530.0 535.0

40 535.0 540.0

Cyan L1C1-CYN1000000000

10 490.0 496.0

20 496.0 500.0

30 500.0 505.0

40 505.0 510.0

Blue L1C1-BLU1000000000

10 460.0 465.0

20 465.0 470.0

30 470.0 475.0

40 475.0 480.0

50 480.0 485.0

Notes for Table 10:

1. Lumileds maintains a tolerance of ±0.5nm on dominant wavelength measurements.

Forward Voltage Bins

Table 11. Forward voltage bin denitions for LUXEON C Color Line.

BIN FORWARD VOLTAGE [1] (Vf)

MINIMUM MAXIMUM

Z 1.50 1.70

A 1.70 1.90

B 1.90 2.10

C 2.10 2.30

D 2.30 2.50

E 2.50 2.70

F 2.70 2.90

G 2.90 3.10

H 3.10 3.30

J 3.30 3.50

Notes for Table 11:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

Mechanical Dimensions

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 11. Mechanical dimensions for LUXEON C Color Line.

NOTE: For internal used dimension please refer to the layer

"Spec_InternalUsedOnly" inside the electronic copy of this file.

Reow Soldering Guidelines

Table 12. Reow prole characteristics for LUXEON C Color Line.

PROFILE FEATURE LEAD-FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin)150°C

Preheat Maximum Temperature (Tsmax)200°C

Preheat Time (tsmin to tsmax)60 to 120 seconds

Ramp-Up Rate (TL to Tp) 3°C / second maximum

Liquidus Temperature (TL)217°C

Time Maintained Above Temperature TL (tL)60 to 150 seconds

Peak / Classication Temperature (Tp)260°C

Time Within 5°C of Actual Temperature (tp)20 to 40 seconds

Ramp-Down Rate (Tp to TL) 6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 13. Moisture sensitivity levels for LUXEON C Color Line.

LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

Time 25ºC to Peak

JEDEC J-STD-020D

Critical Zone

TL to Tp

Ramp-up

Ramp-down

Temperature

Time

Preheat Area

Tsmax

Tsmin

Figure 12. Visualization of the acceptable reow temperature prole as specied in Table 12.

Solder Pad Design

Notes for Figure 13:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB).

Figure 13. Recommended PCB solder pad layout for LUXEON C Color Line.

Packaging Information

Pocket Tape Dimensions

Notes for Figure 14:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Cross secon view A-A and B-B in

this drawing are not drawn to scale

in order to depict the details clearly

Figure 14. Pocket Tape dimensions for LUXEON C Color Line.

Reel Dimensions

Notes for Figure 15:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. Maximum 1,000 pieces per reel.

Figure 15. Reel dimensions for LUXEON C Color Line.

DS144 LUXEON C Color Line

Product Datasheet 20190115

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aliates

warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding

B.V. and its aliates reserve the right to make changes without notice. You as user agree to this disclaimer and

user agreement with the download or use of the provided materials, information and data. A listing of Lumileds

product/patent coverage may be accessed at lumileds.com/patents.

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry rsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver dierentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.