DS90LV017A
www.ti.com
SNLS022C –MARCH 2000–REVISED APRIL 2013
DS90LV017A LVDS Single High Speed Differential Driver
Check for Samples: DS90LV017A
1FEATURES DESCRIPTION
The DS90LV017A is a single LVDS driver device
2• >600 Mbps (300 MHz) Switching Rates optimized for high data rate and low power
• 0.3 ns Typical Differential Skew applications. The DS90LV017A is a current mode
• 0.7 ns Maximum Differential Skew driver allowing power dissipation to remain low even
at high frequency. In addition, the short circuit fault
• 1.5 ns Maximum Propagation Delay current is also minimized. The device is designed to
• 3.3V Power Supply Design support data rates in excess of 600Mbps (300MHz)
• ±355 mV Differential Signaling utilizing Low Voltage Differential Signaling (LVDS)
technology.
• Low Power Dissipation (23 mW @ 3.3V Static)
• Flow-Through Design Simplifies PCB Layout The device is in a 8-lead SOIC package. The
DS90LV017A has a flow-through design for easy
• Interoperable with Existing 5V LVDS Devices PCB layout. The differential driver outputs provides
• Power Off Protection (Outputs in High low EMI with its typical low output swing of 355 mV.
Impedance) The DS90LV017A can be paired with its companion
• Conforms to TIA/EIA-644 Standard single line receiver, the DS90LV018A, or with any of
TI's LVDS receivers, to provide a high-speed point-to-
• 8-Lead SOIC Package Saves Space point LVDS interface.
• Industrial Temperature Operating Range
– (−40°C to +85°C)
Connection Diagram
Figure 1. Dual-In-Line
See Package Number D (R-PDSO-G8)
Functional Diagram
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date. Copyright © 2000–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
DS90LV017A
SNLS022C –MARCH 2000–REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings(1)
Supply Voltage (VCC)−0.3V to +4V
Input Voltage (DI) −0.3V to +3.6V
Output Voltage (DO±) −0.3V to +3.9V
D Package 1190 mW
Maximum Package Power Dissipation @ +25°C Derate D Package 9.5 mW/°C above +25°C
Storage Temperature Range −65°C to +150°C
Lead Temperature Range Soldering (4 sec.) +260°C
(HBM 1.5 kΩ, 100 pF) ≥8kV
(EIAJ 0 Ω, 200 pF) ≥1000V
ESD Ratings (CDM) ≥1000V
(IEC direct 330 Ω, 150 pF) ≥4kV
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
Recommended Operating Conditions Min Typ Max Units
Supply Voltage (VCC) 3.0 3.3 3.6 V
Temperature (TA)−40 25 +85 °C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified(1)(2)(3)
Symbol Parameter Conditions Pin Min Typ Max Units
DIFFERENTIAL DRIVER CHARACTERISTICS
VOD Output Differential Voltage RL= 100ΩDO+, 250 355 450 mV
(Figure 2) DO−
ΔVOD VOD Magnitude Change 1 35 mV
VOH Output High Voltage 1.4 1.6 V
VOL Output Low Voltage 0.9 1.1 V
VOS Offset Voltage 1.125 1.2 1.375 V
ΔVOS Offset Magnitude Change 0 3 25 mV
IOXD Power-off Leakage VOUT = VCC or GND, VCC = 0V ±1 ±10 μA
IOSD Output Short Circuit Current −5.7 −8 mA
VIH Input High Voltage DI 2.0 VCC V
VIL Input Low Voltage GND 0.8 V
IIH Input High Current VIN = 3.3V or 2.4V ±2 ±10 μA
IIL Input Low Current VIN = GND or 0.5V ±1 ±10 μA
VCL Input Clamp Voltage ICL =−18 mA −1.5 −0.6 V
ICC Power Supply Current No Load VIN = VCC or GND VCC 5 8 mA
RL= 100Ω7 10 mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except VOD.
(2) All typicals are given for: VCC = +3.3V and TA= +25°C.
(3) The DS90LV017A is a current mode device and only function with datasheet specification when a resistive load is applied to the drivers
outputs.
2Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV017A
DS90LV017A
www.ti.com
SNLS022C –MARCH 2000–REVISED APRIL 2013
Switching Characteristics
Over Supply Voltage and Operating Temperature Ranges, unless otherwise specified(1)(2)(3)(4)
Symbol Parameter Conditions Min Typ Max Units
DIFFERENTIAL DRIVER CHARACTERISTICS
tPHLD Differential Propagation Delay High to Low RL= 100Ω, CL= 15 pF 0.3 0.8 1.5 ns
tPLHD Differential Propagation Delay Low to High (Figure 3 and Figure 4) 0.3 1.1 1.5 ns
tSKD1 Differential Pulse Skew |tPHLD −tPLHD|(5) 0 0.3 0.7 ns
tSKD3 Differential Part to Part Skew(6) 0 1.0 ns
tSKD4 Differential Part to Part Skew(7) 0 1.2 ns
tTLH Transition Low to High Time 0.2 0.5 1.0 ns
tTHL Transition High to Low Time 0.2 0.5 1.0 ns
fMAX Maximum Operating Frequency(8) 350 MHz
(1) All typicals are given for: VCC = +3.3V and TA= +25°C.
(2) These parameters are ensured by design. The limits are based on statistical analysis of the device performance over PVT (process,
voltage, temperature) ranges.
(3) CLincludes probe and fixture capacitance.
(4) Generator waveform for all tests unless otherwise specified: f = 1 MHz, ZO= 50Ω, tr≤1 ns, tf≤1 ns (10%-90%).
(5) tSKD1, |tPHLD −tPLHD|, is the magnitude difference in differential propagation delay time between the positive going edge and the negative
going edge of the same channel.
(6) tSKD3, Differential Part to Part Skew, is defined as the difference between the minimum and maximum specified differential propagation
delays. This specification applies to devices at the same VCC and within 5°C of each other within the operating temperature range.
(7) tSKD4, part to part skew, is the differential channel to channel skew of any event between devices. This specification applies to devices
over recommended operating temperature and voltage ranges, and across process distribution. tSKD4 is defined as |Max −Min|
differential propagation delay.
(8) fMAX generator input conditions: tr= tf< 1 ns (0% to 100%), 50% duty cycle, 0V to 3V. Output criteria: duty cycle = 45%/55%, VOD >
250mV.
Parameter Measurement Information
Figure 2. Differential Driver DC Test Circuit
Figure 3. Differential Driver Propagation Delay and Transition Time Test Circuit
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: DS90LV017A
DS90LV017A
SNLS022C –MARCH 2000–REVISED APRIL 2013
www.ti.com
Parameter Measurement Information (continued)
Figure 4. Differential Driver Propagation Delay and Transition Time Waveforms
APPLICATION INFORMATION
Table 1. Device Pin Descriptions
Pin # Name Description
2 DI1 TTL/CMOS driver input pins
7 DO1+ Non-inverting driver output pin
8 DO1−Inverting driver output pin
4 GND Ground pin
1 VCC Positive power supply pin, +3.3V ± 0.3V
3, 5, 6 NC No connect
4Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV017A
DS90LV017A
www.ti.com
SNLS022C –MARCH 2000–REVISED APRIL 2013
Typical Performance Curves
Output High Voltage vs Output Low Voltage vs
Power Supply Voltage Power Supply Voltage
Figure 5. Figure 6.
Output Short Circuit Current vs Differential Output Voltage
Power Supply Voltage vs Power Supply Voltage
Figure 7. Figure 8.
Differential Output Voltage Offset Voltage vs
vs Load Resistor Power Supply Voltage
Figure 9. Figure 10.
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: DS90LV017A
DS90LV017A
SNLS022C –MARCH 2000–REVISED APRIL 2013
www.ti.com
Typical Performance Curves (continued)
Power Supply Current Power Supply Current vs
vs Frequency Power Supply Voltage
Figure 11. Figure 12.
Power Supply Current vs Differential Propagation Delay vs
Ambient Temperature Power Supply Voltage
Figure 13. Figure 14.
Differential Propagation Delay vs Differential Skew vs
Ambient Temperature Power Supply Voltage
Figure 15. Figure 16.
6Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV017A
DS90LV017A
www.ti.com
SNLS022C –MARCH 2000–REVISED APRIL 2013
Typical Performance Curves (continued)
Differential Skew vs Transition Time vs
Ambient Temperature Power Supply Voltage
Figure 17. Figure 18.
Transition Time vs
Ambient Temperature
Figure 19.
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: DS90LV017A
DS90LV017A
SNLS022C –MARCH 2000–REVISED APRIL 2013
www.ti.com
REVISION HISTORY
Changes from Revision B (April 2013) to Revision C Page
• Changed layout of National Data Sheet to TI format ............................................................................................................ 7
8Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV017A
PACKAGE OPTION ADDENDUM
www.ti.com 6-Feb-2020
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status
(1)
Package Type Package
Drawing Pins Package
Qty Eco Plan
(2)
Lead/Ball Finish
(6)
MSL Peak Temp
(3)
Op Temp (°C) Device Marking
(4/5)
Samples
DS90LV017ATM NRND SOIC D 8 95 TBD Call TI Call TI -40 to 85 LV17A
TM
DS90LV017ATM/NOPB ACTIVE SOIC D 8 95 Green (RoHS
& no Sb/Br) SN Level-1-260C-UNLIM -40 to 85 LV17A
TM
DS90LV017ATMX/NOPB ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) SN Level-1-260C-UNLIM -40 to 85 LV17A
TM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may
reference these types of products as "Pb-Free".
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based
flame retardants must also meet the <=1000ppm threshold requirement.
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
PACKAGE OPTION ADDENDUM
www.ti.com 6-Feb-2020
Addendum-Page 2
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
DS90LV017ATMX/NOPB SOIC D 8 2500 330.0 12.4 6.5 5.4 2.0 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 5-Dec-2014
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
DS90LV017ATMX/NOPB SOIC D 8 2500 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 5-Dec-2014
Pack Materials-Page 2
www.ti.com
PACKAGE OUTLINE
C
.228-.244 TYP
[5.80-6.19]
.069 MAX
[1.75]
6X .050
[1.27]
8X .012-.020
[0.31-0.51]
2X
.150
[3.81]
.005-.010 TYP
[0.13-0.25]
0 - 8 .004-.010
[0.11-0.25]
.010
[0.25]
.016-.050
[0.41-1.27]
4X (0 -15 )
A
.189-.197
[4.81-5.00]
NOTE 3
B .150-.157
[3.81-3.98]
NOTE 4
4X (0 -15 )
(.041)
[1.04]
SOIC - 1.75 mm max heightD0008A
SMALL OUTLINE INTEGRATED CIRCUIT
4214825/C 02/2019
NOTES:
1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches.
Dimensioning and tolerancing per ASME Y14.5M.
2. This drawing is subject to change without notice.
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not
exceed .006 [0.15] per side.
4. This dimension does not include interlead flash.
5. Reference JEDEC registration MS-012, variation AA.
18
.010 [0.25] C A B
5
4
PIN 1 ID AREA
SEATING PLANE
.004 [0.1] C
SEE DETAIL A
DETAIL A
TYPICAL
SCALE 2.800
www.ti.com
EXAMPLE BOARD LAYOUT
.0028 MAX
[0.07]
ALL AROUND
.0028 MIN
[0.07]
ALL AROUND
(.213)
[5.4]
6X (.050 )
[1.27]
8X (.061 )
[1.55]
8X (.024)
[0.6]
(R.002 ) TYP
[0.05]
SOIC - 1.75 mm max heightD0008A
SMALL OUTLINE INTEGRATED CIRCUIT
4214825/C 02/2019
NOTES: (continued)
6. Publication IPC-7351 may have alternate designs.
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.
METAL SOLDER MASK
OPENING
NON SOLDER MASK
DEFINED
SOLDER MASK DETAILS
EXPOSED
METAL
OPENING
SOLDER MASK METAL UNDER
SOLDER MASK
SOLDER MASK
DEFINED
EXPOSED
METAL
LAND PATTERN EXAMPLE
EXPOSED METAL SHOWN
SCALE:8X
SYMM
1
45
8
SEE
DETAILS
SYMM
www.ti.com
EXAMPLE STENCIL DESIGN
8X (.061 )
[1.55]
8X (.024)
[0.6]
6X (.050 )
[1.27] (.213)
[5.4]
(R.002 ) TYP
[0.05]
SOIC - 1.75 mm max heightD0008A
SMALL OUTLINE INTEGRATED CIRCUIT
4214825/C 02/2019
NOTES: (continued)
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate
design recommendations.
9. Board assembly site may have different recommendations for stencil design.
SOLDER PASTE EXAMPLE
BASED ON .005 INCH [0.125 MM] THICK STENCIL
SCALE:8X
SYMM
SYMM
1
45
8
IMPORTANT NOTICE AND DISCLAIMER
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD
PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable
standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you
permission to use these resources only for development of an application that uses the TI products described in the resource. Other
reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third
party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims,
damages, costs, losses, and liabilities arising out of your use of these resources.
TI’s products are provided subject to TI’s Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on
ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable
warranties or warranty disclaimers for TI products.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2020, Texas Instruments Incorporated
